自粘聚合物改性沥青防水卷材胶粘剂

在SBS改性沥青防水卷材表面涂敷一层自粘性胶粘剂并以隔离纸覆盖，使用时撕掉隔离纸直接粘贴于屋面即可粘接密封牢，不但施工方便而且消除了熔融法施工造成的污染。该胶粘剂由沥青40％～65％，SBS 5％～30％，增粘剂2％～25％和助剂5％～25％构成。胶层具有可塑性、延展性，可自行填补屋面出现的裂缝，保证防水卷材的防水密封效果。     

POWER CONSUMPTION WITH ANCHOR MIXERS EFFECT OF BOTTOM CLEARANCE

The effect of bottom clearance on power draw for anchors is investigated. The results suggest that power input decreases as the bottom clearance ratio b/D increases. A new correlation is proposed in which both bottom and wall clearance effects on power input are considered. The dependence of power input on these effects is additive rather than multiplicative. Thus, the total power consumption is the sum of the power inputs generated by the wall and bottom clearance. Power results from 3D-CFD numerical simulations are also presented. These results confirm fairly well the experimental points.     

凹凸棒粘土用作高水速凝注浆悬浮剂

以凹凸棒粘土作为高水速凝固化充填材料的悬浮稳定剂，考察了不同制浆机械对凹凸棒粘土制浆率的影响。采用高剪切混合乳化机预制的1％凹凸棒粘土浆配制高水速凝固化充填材料甲、已料单浆可获得满意的悬浮稳定效果。其充填体结石抗压强度早期发展迅速，后期持续增长。采用此工艺，注浆料的材料成本仅增加2％。     

下河沉积型瓷石的工艺特性与开发应用的探讨

本文论述了新近在江西下河发现的沉积型瓷石的地质特点、矿石特征、精泥性能、成瓷工艺及其开发应用前景。     

对甲醇精馏几个问题的认识

简述甲醇精馏三塔流程原理 ,分析了加压精馏塔及常压精馏塔物料和热量平衡关系 ,提出了操作中应注意的事项     

The influence of fluid elasticity on wall effects for creeping sphere motion in cylindrical tubes

Experimental results are presented of wall effect for the slow motion of spheres in elastic, constant-viscosity liquids. The results are correlated in terms of diameter ratio for d/D < 0.3, and Weissenberg number We < 5. Weissenberg number is defined as We = 2θV_m/d, with θ the Maxwellian relaxation time (θ = N₁/2τγ). The wall effect is found to be adequately described by Newtonian expressions for small Weissenberg number, We < 0.01. For larger values of the Weissenberg number, We > 0.2, virtually no wall effect is discernible; the small effect observed is correlated by the wall factor expression The wall effect observed is ascribed to the influence of fluid elasticity alone, since all the fluids used were elastic to a greater or lesser extent, but showed no shear thinning.      

超临界流体技术应用研究

超临界流体技术具有许多传统技术所没有的快速，高效，低能耗，污染少等优点，在材料制备，医药工业，生物工程，食物，环境，化工等许多方面展现了广阔的应用前景。综述了其在萃取，材料制备和作为反应介质等方面的应用。     

新型陶瓷刀具材料的研究与开发

工业用钢材的质量提高使材料加工难度增加,耐高温的高硬度高强度陶瓷材料被用做切削刀具并逐渐推广应用。本文对陶瓷刀具的材质、种类、性能特点作了比较和评价,并重点介绍了新型的晶须增韧陶瓷刀具。最后,对陶瓷刀具的市场前景进行了预测,并指出了陶瓷刀具研制方面应该深入研究的课题。     

Phosphate sorption approach for determining phosphorus requirements of wheat in calcareous soils

Five field experiments involving P application rates from 0 to 66 kg P ha^–1 were conducted on irrigated wheat at Tandojam, Pakistan. The soils belonged to two great soil groups, Torrifluvent and Camborthid. All soils were calcareous. Olsen-P contents ranged from 3.5 to 6.3 mg P kg^–1. Phosphate sorption curves were developed for soils from control (no P) plots at each site. Concentrations of P in solution established by fertilization in the field as estimated from the sorption curves ranged from 0.008 to 0.16mg P L^–1. Actual grain yields were converted to relative grain yields and plotted against corresponding concentrations of P in solution. Yield response to P application was obtained in each experiment. Control plot yields ranged from 57 to 89% of maximum yield of respective experiments. Phosphorus requirements of wheat were 0.032 mg L^–1 for 95% yield as determined from a composite yield response curve. Predicted quantities of P required to attain 0.032 mg P L^–1 ranged from 18 to 29 kg P ha^–1. The results of the study suggest that the P sorption approach can be used as a rational basis for making P fertilizer recommendations for various soil-crop combinations.     

Predicting external sulphur requirement of alfalfa from sulphate sorption isotherm of Tanzanian soils

For Tanzanian soils dominant in hydrous oxides of iron and amorphous ferri-alumino silicate, a 48-hour (hr) mixing period with the sulphate (SO₄) solution was adequate for a near-equilibrium condition. Although differing in their SO₄ sorption capacity, all the soils sorbed SO₄ at or beyond 1µg ml^–1 sulphur (S) concentration in the supernatant. Hydroxyl (OH) ions were displaced during SO₄ sorption as indicated by a significant positive correlation between the amount of sorbed SO₄ and the difference in pH values determined in 0.1N K₂ SO₄ and 0.1N KCl, i.e. the dpH values.In a greenhouse experiment, alfalfa was grown on eight soils at six adjusted S concentrations. Sulphur deficiency symptoms appeared in the control pots of those soils which were low in native sorbed SO₄, SO₄ sorption capacity and initial soil solution S concentration. Sulphur fertilization increased dry matter (DM) yield as well as response to applied S. The external S concentration, i.e. adjusted S concentration required for 95% of the maximum DM yield, ranged from 0.8 to 8.2µg S ml^–1 with values less than 2.0 on most of the soils. The external S concentration decreased hyperbolically as the SO₄ sorption capacity of the soils increased. The total amount of fertilizer S required to obtain the external S concentration in solution, and at the same time satisfy the SO₄ sorption capacity of the soil at the external S concentration (determined from the sorption isotherm) was defined as the external S requirement for the specified yield level of alfalfa. The external S requirement for 95% of the maximum yield of alfalfa varied from soil to soil due to differences in their capacity and intensity for S nutrition.Part of a thesis by the senior author for the MSc (Agric) degree of the University of Dar es Salaam