叶片类零件检测方法的试验研究

研究了交流电磁场信号对叶片裂纹影响的方式和规律,分析和找出了缺陷与交流电磁场信号响应特征之间的关系,提出了叶片表面采用交流电磁场检测技术的原理、方法.通过采用交流电磁场检测技术检测证实,在工程检测中有一定的实际意义.     

Round-Robin Test on methods for determining chloride transport parameters in concrete

This paper presents the results of a Round-Robin Test on methods for determining chloride transport parameters in concrete, carried out by the Technical Committee TC 178-TMC: “Testing and Modelling Chloride Penetration in Concrete” in which 27 different laboratories around the world have participated, using 13 different methods, in triplicate specimens, for 4 different mixes of concrete cast with different binders. Four different groups of methods have been tested: Natural diffusion methods (D), Migration methods (M), Resistivity methods (R) and Colourimetric methods (C). The statistical treatment of the data has been carried out according to the International Standard ISO 5725-2:1994 for the determination of the accuracy (trueness and precision) of measurement methods and results. Part 2: Basic method for the determination of the repeatability and reproducibility of a standard measurement method. In order to make an evaluation of these methods, four indicators have been identified and within each of them, several sub-indicators have been assigned. According to this system of classification, the methods have been classified following each indicator (trueness, precision, relevance and convenience), and also globally, by assigning different factors of importance, F.I., to the different indicators.     

Interplay Between Wetting and Phase Behavior in Binary Polymer Films and Wedges: Monte Carlo Simulations and Mean Field Calculations

Confining a binary mixture, one can profoundly alter its miscibility behavior. The qualitative features of miscibility in confined geometry are ratheruniversal and shared by polymer mixtures as well as small molecules, but the unmixing transition in the bulk and the wetting transition are typically well separated in polymer blends. The interplay between wetting and miscibility of a symmetric polymer mixture via large-scale Monte Carlo simulations in the framework of the bond fluctuation model and via numerical self–consistent field calculations is studied. The film surfaces interact with the monomers via short ranged potentials, and the wetting transition of the semi–infinite system is of first order. It can be accurately located in the simulations by measuring the surface and interface tensions and using Young’s equation. If both surfaces in a film attract the same component, capillary condensation occurs and the critical point is close to the critical point of the bulk. If surfaces attract different components, an interface localization/delocalization occurs which gives rise to phase diagrams with two critical points in the vicinity of the pre-wetting critical point of the semi–infinite system. The crossover between these two types of phase diagrams as a function of the surface field asymmetry is studied. The dependence of the phase diagram on the film thickness Δ for antisymmetric surface fields is investigated. Upon decreasing the film thickness, the two critical points approach the symmetry axis of the phase diagram, and below a certain thickness Δ_tri, there remains only a single critical point at the symmetric composition. This corresponds to a second-order interface localization/delocalization transition even though the wetting transition is of first order. At a specific film thickness, Δ_tri, tricritical behavior is found. The behavior of antisymmetric films is compared with the phase behavior in an antisymmetric double wedge. While the former is the analog of the wetting transition of a planar surface, the latter is related to the filling behavior of a single wedge. Evidence for a second-order interface localization/delocalization transition in an antisymmetric double wedge is presented, and its unconventional critical behavior is related to the predictions of Parry et al. (Phys. Rev. Lett. 83:5535 (1999)) for wedge filling. The critical behavior differs from the Ising universality class and is characterized by strong anisotropic fluctuations.Invited paper presented at the Fifteenth Symposium on Thermophysical Properties, June 022–27, 2003, Boulder, Colorado, U.S.A.     

Leakage tests for Am solid sources used for liquid xenon detector monitoring

Experimental tests are described to check solid ²⁴¹Am radioactive sources used to monitor operation of liquid xenon detectors. In particular, radioactive leakage was tested in extreme temperature conditions following immersion in liquid nitrogen for different time periods. No radioactivity loss was detected from the sources considered. The paper describes the source characteristics, test methods and results obtained.     

低速旋转机器振动测试与评价

低转速机器振动频率低、幅值小,测量困难.在考察转子的平衡情况时,不能仅通过振动幅值的大小来评价转子的平衡状况,而应该通过试加重量计算加重灵敏度以后,再计算出转子残余不平衡量并与标准要求值进行比较和判断.     

学生成绩评定方法研究

分别用x2拟合检验法、直方图和Q-Q分布图从直观和理论两方面出发验证学生成绩是否呈正态分布,通过图象与应用概率统计知识有机结合,运用数学软件对数据进行处理,达到验证研究的目的。     

多元回归分析在电热式平板硫化机热板温度场中的应用

分析电热平板硫化机热板温差大的主要影响因素,重点研究热源分布情况对温差的影响.以400×400电热平板硫化机为例,应用多元回归的二次响应曲面模型及其子模型,对热源间距(电热管间距)与热板表面最大温差之间的函数关系进行预测,检验并分析预测结果(拟合曲线)的可靠程度,从而得出较合理的数学模型,即完整二次响应曲面模型.此模型可为工程设计提供参考依据.     

Development of a Reconfigurable Platform for Manufacturing Equipment Control

In modern manufacturing equipment control area,controller is required to deliver higher computing capability for adopting advanced algorithms to meet speed and accuracy requirements,and reconfigurabilities for changing or(and)adding features or functions.This paper presents a methodology in design and implementation of a high performance and reconfigurable platform for manufacturing equipment control.This methodology is in virtue of system on a programmable chip(SoPC)technolo- gy but replacing the on-chip processor by an external high performance,floating-point digital signal processor(DSP).The appli- cation of the DSP is designed as a multi-threaded framework,which has more flexibilities than a traditional single-loop one.Fur- thermore,the field programmable gate array(FPGA)system can be reconfigured easily and quickly to meet a new requirement by dragging and dropping pre-built components in a SoPC building environment.As a result,the controller platform is more recon- figurable in terms of algorithms and functions.This platform is implemented in a 3-axis milling machine control and the result indicates that the design and implementation presented in this paper is feasible.     

ZF12-145(L)气体绝缘金属封闭开关设备断路器

介绍了ZF12-145（L）三相共箱式气体绝缘金属封闭开关设备断路器的技术参数、性能、灭弧室的计算分析和主要特点.     

基于三角形滤波卷积核的快速线积分卷积算法

基于纹理的线积分卷积(LIC)方法,能连续细致、动画地表示2D矢量大小和方向,但卷积计算极其耗时。针对这个问题实现了基于常数滤波卷积核的快速线积分卷积算法,提出并论证了基于三角形滤波卷积核的快速线积分卷积算法,对于实际矢量场,上述两种方法均将运算速度提高了一个数量级,而基于三角形滤波卷积核的快速线积分卷积算法的结果使图像更加平滑。