具R（X）〈2的自反Banach空间中的M不动点性质

对于Banach空间中的两个有界闭凸集,首先引入一个新的度量,并且在这种新的度量下重新定义非扩张映射,称它为肘非扩张映射,并且证明在一个自反的Banach空间中,当R（X）〈2时,它有肘不动点性质．     

Novel fixed‐carrier membranes for CO2 separation

A new membrane material having two kinds of CO₂ carriers was obtained. Composite membranes were prepared with the material and support membranes. The facilitated transport of CO₂ through these membranes was performed with pure CH₄ and CO₂ as well as CH₄/CO₂ mixtures containing 50 vol % CO₂. The results show that the membranes possess better CO₂ permeance than that of other fixed carrier membranes reported in the literature. In the measurements with pure gases, at 26°C, 0.013 atm of CO₂ pressure, the membrane with polysulfone support displays a CO₂ permeance of 7.93 × 10^?4 cm³ /cm² s cmHg and CO₂/CH₄ ideal selectivity of 212.1. In the measurements with mixed gases, at 26°C, 0.016 atm of CO₂ partial pressure, the membrane displays a CO₂ permeance of 1.69 × 10^?4 cm³ /cm² s cmHg and CO₂/CH₄ selectivity of 48.1. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2222–2226, 2002     

Manipulation of gasification coal feed in order to increase the ash fusion temperature of the coal enabling the gasifiers to operate at higher temperatures

Coal is a crucial feedstock for South Africa’s unique synfuels and petrochemicals industry and used by Sasol as a feedstock to produce synthesis gas via the Sasol-Lurgi Fixed Bed Dry Bottom (FBDB) gasification process. The ash fusion temperature (AFT) gives detail information on the suitability of a coal source for gasification purposes, and specifically to which extent ash agglomeration or clinkering is likely to occur within the gasifier. Ash clinkering inside the gasifier can cause channel burning and unstable operation.Sasol-Lurgi FBDB gasifiers are currently operated with the philosophy of adding an excess of steam to the process to control the H₂/CO ratio of the syngas produced, but indirectly also to control the maximum gasifier temperature below the AFT of the coal. An opportunity exists to increase the AFT of the coal fed to the gasifiers by adding AFT increasing minerals to the coal blend before it is fed into the gasification process. For the aim of this study a South African coal source was investigated, as being used by the gasification operations in Secunda.With the specific aim of this study, to increase the AFT, the determination of the AFT of the coal blends where acidic components such as silica (SiO₂), alumina (Al₂O₃) and titania (TiO₂) were added was conducted. The Al₂O₃ had the biggest and most significant effect on the AFT with the least addition to the coal blend. The effect of SiO₂ and TiO₂ were very similar, but the effect was much smaller and further Al₂O₃ was needed to increase the AFT to a similar AFT level in comparison to the SiO₂ used. Kaolinite, roof and floor components (containing mainly Al₂O₃ and SiO₂) were also added, also showing an increase in the AFT with up to 4 mass% addition. Another observation was that the AFT was non-additive (not a linear weighted calculated average) and not the weighted average AFT as was expected for the other coal properties such as the ash content, for example. The ash slagging characteristics is a non-additive property of individual coal sources in the blend and therefore difficult to predict.In general it can be concluded that the unique opportunity exists to increase the AFT, was tested, proven and mechanistically outlined in this study on the coal source fed to the Sasol-Lurgi FBDB gasifiers. The AFT can be increased to >1350 °C by adding AFT increasing minerals or species to the coal blend before it is fed into the gasification process. By increasing the AFT, the direct effect will be that steam consumption can be decreased, which in turn will improve carbon utilization.     

Continuous polymerization of lactam–lactone block copolymers in a twin‐screw extruder

Continuous copolymerizations of ?‐caprolactone with ?‐caprolactam and ω‐lauryl lactam were carried out in a modular intermeshing corotating twin‐screw extruder. Sodium hydride (initiator) and N‐acetyl caprolactam (coinitiator) were used to synthesize lactam–lactone copolymers in a twin‐screw extruder. We consider the variables of feeding order and feed rate of comonomers on the reactive extrusion of lactam–lactone copolymers. It was observed that simultaneous feeding of both monomers with initiator and coinitiator in the first hopper produced a mixture of homopolymers. When we fed the lactam into the first hopper and caprolactone sequentially into the second hopper, we obtained the lactam–caprolactone block copolymers. However, when we fed caprolactone first into the first hopper and the lactam into the second hopper, the extruded product was a mixture of poly(?‐caprolactone) and lactam monomer. We synthesized high molecular weight copolymers of poly(caprolactam‐b‐caprolactone) and poly(lauryl lactam‐b‐caprolactone) with different block lengths by sequential feeding of monomers. The block length of the block copolymer could be adjusted by controlling the feed rate of each monomer during reactive extrusion. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1429–1437, 2003     

土壤水分传感器实验室标定和测试方法探讨

通过在实验室制作标准试样(土壤)标定及测试土壤水分传感器,研究土壤水分传感器在实验室标定及测试的步骤和方法,探讨土壤水分传感器实验室环境下率定关系式的建立,提高土壤水分传感器在实验室环境下数据测试的准确性和权威性,在于探讨土壤水分传感器实验室标定和测试方法,为土壤水分传感器的实验室检测提供方法支撑。     

Fixed‐time synchronization for complex‐valued BAM neural networks with time delays

In this paper, the fixed‐time synchronization for complex‐valued bidirectional associative memory (BAM) neural networks with time delays is studied. Based on the fixed‐time stability, the Lyapunov functional method and some inequality techniques, a new criterion is presented to guarantee that the addressed systems achieve synchronization in fixed time and a more accurate estimation independent of the initial conditions is given for the settling time. Meanwhile, a new nonlinear delayed controller different from the existing ones is designed. In the end, two numerical examples are provided to illustrate the effectiveness of the obtained result.     

一种采用单双跳变的低功耗确定性BIST方案

为实现低功耗和高故障覆盖率,基于单跳变测试技术和2-bit扭环计数器,提出一种新型的单双跳变的确定性测试向量产生器.首先,与一般的确定性测试方案直接存储确定性种子不同,利用ROM存储控制信号并通过单双跳变生成确定性种子和确定性测试向量,这样控制信号的长度约为确定性种子的1/2,有利于降低功耗并节约存储空间.其次,2-bit减法计数器合理地过滤了冗余向量,大大缩短了测试时间并降低总体能耗.最后,为了适应不同的测试需求,还设计了相应的测试向量压缩算法和三种x指定算法.实验结果表明,平均功耗分别降低了42.36%、32.32%、38.94%,测试长度分别减少了77.6%、86.1%、84.3%,测试数据分别压缩了79.4%、65.2%、68.1%.     

基于雪岭云杉树轮的阿克苏河干流冬季径流重建

基于阿克苏河上游高山区采集的雪岭云杉树轮样芯构建了雪岭云杉树轮宽度年表,结合阿克苏河干流径流数据解析了雪岭云杉长期生长与阿克苏河干流径流关系,并重建了阿克苏河干流1813—2015年冬季径流序列。结果表明:利用雪岭云杉树轮宽度年表重建的阿克苏河干流1813—2015年冬季径流序列模拟值与实测值吻合度较高,重建径流序列稳定可靠;1813—2015年阿克苏河干流冬季多年平均流量为82.19 m~3/s,共出现5次持续丰水期和3次持续枯水期,最长的枯水段持续17年(1943—1959年);阿克苏河干流冬季径流变化存在51 a、29 a、16 a周期,第一主周期为51 a。     

钢管混凝土拱抗冲击影响因素

为研究钢管混凝土拱的抗冲击力学性能,在试验结果验证的基础上,采用有限元分析方法,研究了集中冲击荷载作用下矢跨比、混凝土强度等级、钢材屈服强度和冲击质量4个因素对钢管混凝土拱抗冲击力学性能的影响.计算结果表明:相同冲击能量下,钢管混凝土拱存在着一个矢跨比阈值f,当试件矢跨比大于f时,试件的抗冲击性能基本相同;与钢管混凝土梁、柱类似,增大混凝土强度对提高试件的抗冲击性能影响不明显,而增大钢材屈服强度可以使试件的抗冲击性能明显改善;随着冲击质量增加,试件的冲击力峰值变化不大,挠度变大,冲击持续时间变长,冲击质量与跨中挠度成线性关系.     

开口谐振环结构负折射率材料对电磁波偏振特性的影响研究

电磁波在经过负折射率材料以后,偏振状态会有所改变.对开口谐振环电磁响应特性了解的基础上,采用时域有限积分方法,分别研究了方形、六边形和圆形开口谐振环负折射率材料在不同频率处以及斜入射时对电磁波偏振特性的影响.仿真结果表明,不同的结构、频率和入射角度,电磁波偏振翻转的程度有所不同.研究结果可为电磁波偏振状态的调控提供一定的理论依据和借鉴.