Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002     

Structural development in cycloolefin copolymers under uniaxial elongational flow

Development of structures in new cycloolefin copolymers (COCs) of ethylene–norbornene (E–NB) and ethylene–tetracyclododecene (E–TD) of different NB/TD compositions were investigated under uniaxial elongational flow. For E–NB copolymer, which has multiblock sequences, a shoulder in WAXD at 0.76 nm was evident besides its amorphous halo, and the relative intensity of the peak increased with increasing comonomer content (NB). The appearance of a new peak for E–TD copolymer, and a relatively higher intense peak for E–NB copolymer at the same position of 0.76 nm, indicated that local ordering of the segments occurred when the COC was subjected to uniaxial flow. A lower comonomer composition of elongated COC, at a constant Hencky strain rate, exhibited two T_g values, whereas a higher composition showed a single T_g. Both local ordering and segmentization occurred in low comonomer content COCs but only local ordering occurred in higher comonomer content COCs. Both the shear viscosity and roll processing experiments exhibited similar phenomena of segregation. A model is proposed to illustrate the structure of COC after uniaxial elongation/deformation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3421–3427, 2004     

Sm~（3＋），Eu~（3＋），Tb~（3＋）等离子在低熔点玻璃中的光谱性质及

Ｓｍ￣（３＋），Ｅｕ￣（３＋），Ｔｂ￣（３＋）等离子在低熔点玻璃中的光谱性质及可见荧光的研究姜妍彦，王承遇，王继红（大连轻工业学院１１６００１）ＳｔｕｄｙｏｎＳｐｅｃｔｒａＰｒｏｐｅｒｔｉｅｓａｎｄＶｉｓｉｂｌｅＦｌｕｏｒｅｓｃｅｎｃｅｏｆＳｍ￣（３...     

Static and Cyclic Fatigue of Alumina at High Temperatures: II, Failure Analysis

Failure mechanisms of an alumina, tested at 1200°C under static and various cyclic loading conditions, were examined. Slow crack growth of a single crack is the dominant mechanism for the failure in specimens under cyclic loading with a short duration of maximum stress at all applied stress levels, as well as at high applied loads for static loading and cyclic loading with a longer hold time at maximum stress. At low stress levels, failure of static loading and cyclic loading with a longer hold time at maximum stress might occur by formation and/or growth of multiple macrocracks. More importantly, for all the given loading conditions. The viscous glassy phase behind the crack tip could have a bridging effect on the crack surfaces. A simplified model for calculating effective stress intensity factor at the crack tip under static and various cyclic loading demonstrated a trend consistent with the stress–life data.     

发展玻璃纤维产业纺织品

本文层层深入地介绍产业用纺织品发展与应用、玻璃纤维纺织品发展与应用,以及它们的国内外概况并给出一些意见,以期待玻璃纤维产业纺织品有更好的发展.     

Low-E镀膜中空玻璃窗的能量平衡探讨

介绍了各种结构Low-E中空玻璃窗的传热性能,对窗户各个朝向的能量平衡进行了分析,说明通过Low-E中空玻璃窗户能更多地获得太阳能,同时可以减少建筑物能耗.建议根据建筑物的方向不同,在窗户的设计上也应有相应的差别.     

离子交换增强玻璃表面化学稳定性的研究

系统研究了化学钢化及盐溶液后处理对Na2O-CaO-SiO2玻璃表面化学稳定性的影响。详细考察了用熔融KNO3化学钢化的玻璃以及用适当盐溶液后处理的化学钢化玻璃,在受水侵蚀后R2O的沥滤量和失重以及受碱侵蚀后SiO2的溶出量和失重。结果表明,用熔融KNO3对玻璃进行钢化处理后,玻璃的耐水性和耐碱性均有明显下降。而将化学钢化的玻璃利用适当盐溶液处理后,可以改善钢化玻璃的化学稳定性,因而可以进一步提高化学钢化玻璃的使用性能和拓展其使用范围。     

Synthesis and characterization of novel polyesterimides

A series of soluble novel polyesterimides was synthesized from diamines [a mixture of 2,2‐bis(4‐(4‐aminophenoxy)phenyl)propane (BAPP) with amine‐terminated polysiloxane (ATPS) in various mole ratios] and the ester‐group‐containing dianhydrides. The ester group containing dianhydrides in turn was synthesized by the transesterification reaction of trimellitic anhydride (TMA) with diacetate ester of hydroquinone (HQ), 4,4′‐dihydrophenyl (BP), 1,6‐hexanediol, or ethylene glycol. The resulted polyesterimides were characterized by using Fourier‐transform infrared spectroscopy, inherent viscosity, solubility, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The polyesterimides of BP and HQ had relatively high glass transition temperatures in the range of 214.7–227.2 and 195.7–210.5°C, respectively. The glass transitions decreased rather slowly with the increase in polysiloxane content. Thermal stability and the weight‐loss behavior of polyesterimides were studied by TGA. All polyesterimides of BP and HQ (BPI and HQI) showed no significant weight loss below 500°C in a N₂ environment, and the decomposition temperatures (T_d5%) of BPI and HQI were >520°C. Most polyesterimides were soluble in polar aprotic solvents and m‐cresol. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 730–738, 2004     

氟磷灰石-氟金云母微晶玻璃的生物活性研究

通过模拟细胞外液浸泡及动物骨内种植的方法研究了氟磷灰石-氟金云母微晶玻璃的生物活性机理。借助于SEM/EDAX,薄膜XRD,IRRS及原子吸收光谱分析等技术,研究了该微晶玻璃在生理环境中表面羟墓碘灰石层的形成过程。根据微晶玻璃中主晶相种类、显微结构特点及溶液中各离子的浓度等讨沦了羟基碑灰石层的形成机理。认为微晶玻璃中残余玻璃相的Ca~(2+)溶出及溶液相对于羟基磷灰石的过饱和状态,对材料表面羟基碑灰石层的形成具有重要意义。形成的羟基磷灰石层具有较低的结晶度,它是由最初的无定形态含水富CaO,P_2O_5薄层晶化转变而成。     

Order Distance Estimation in Porous Glasses via Transformed Correlation Function of Small-Angle Scattering

A mesoporous two-phase system, consisting of colloidal silica in the cavities of the main silica frame work of a macroporous glass, was investigated by use of Small-Angle X-ray scattering. The transformed correlation function _T(r) was determined for this material for distances r<40 nm. The application of the intrinsic properties of _T(r) yields estimations for two fundamental order distances L ₁=11 nm and L ₂=120 nm of the~porous glass possessing a clear geometric interpretation: L ₁, a short-order-range, is the mean chord length of the mesopores plus the mean chord length in the secondary particles. L ₂, a long-order-range, is an estimation of the mean diameter of a macropore plus the mean free distance in the silica framework which separates two nearly parallel segments of two adjacent macropores.