基于扩展分形和CFAR特征融合的SAR图像目标识别

研究了多信息融合技术在SAR图像目标识别中的应用。将扩展分形特征(Extended Fractal)与双参数恒虚警特征(Double Parameter CFAR)形成的多信息进行融合处理。运用Dempster-Shafer证据理论，在决策层对SAR图像中的像素进行识别分类。实验结果表明通过融合对像素分类的准确性明显好于单特征的检测结果，减少了虚警概率，提高了系统的识别能力。     

掺气减蚀保护作用的新概念

利用针式掺气流速仪测量原型和模型掺气浓度场、流速场，气泡尺寸及其概率分布的研究成果表明，原型水流韦伯数高，形成微小气泡的能力比模型强，气泡上浮慢，接近底部的小尺寸气泡概率及掺气浓度比模型大。初步研究认为：0.2mm或0.5mm以下的微小气泡在掺气减蚀中起着主要作用，可能只要很小掺气浓度即可达到掺气减蚀的效果。因此以小尺寸气泡的掺气浓度，作为判断掺气减蚀保护作用的指标将更为准确。     

火工品压药机装配误差的研究

针对军用雷管生产线中压药机结构,分别用极值法和概率法对压药机冲子和雷管的配合精度,进行了装配尺寸链的描述和计算,并对所得的结果进行了比较。     

A Topological Implementation for Motion Planning of a Robotic Arm

An efficient path planning algorithm based on topologic method is presented in this paper.The collision free path planning for three-joint robotic arm consists of three parts:partition of C-space,construction of CN and search for a path in CN.We mainly solved the problems of partitioning the C-space and undging the connectivity between connected blocks,etc.For the motion planning of a robotic arm with a gripper,we developed the concepts of global planning and local planning,and discussed the basic factors for constructing the planning system.In the paper,some evaluation and analysis of the complexity and reliability of the algorithm are given,together with some ideas to improve the efficiency and increase the reliability.At last,some experimental results are pesented to show the efficency and accuracy of the algorithm.     

Unperturbed dimension of poly(4-acetoxystyrene) measured in good and theta solvents

In order to obtain the additional data concerning the unperturbed dimension of poly-4-substituted styrene, light scattering measurements are performed on the twenty-two fractions with molecular weight of (0.91–352)·10⁴ of poly(4-acetoxystyrene) in dioxan at 25°C, from which the molecular weight obtained was found easily to be evaluated with the gel permeation chromatography using THF. Phase separation experiments for this polymer indicate that the theta state is attained in isopropyl acetate at 19.7°C and butyl acetate at 26.8°C. By making viscosity measurements at that state, the value of K_Θ is directly evaluated as 5.4·10^?4 dl g^?1. The limiting viscosity number is also obtained in good solvents, THF and dioxan, at 25°C and constants of the Mark-Houwink-Sakurada equation in each solvent are determined. Further, approximately the same K_Θ as above is obtained from these data with the Stockmayer-Fixman plot. The calculated value of steric factor, 2.37, on this polymer may be plausible, compared with those of polyvinylaromatic derivatives.     

小波变换用于影象分割的研究

将近年来兴起的小波理论应用于影象分割技术，提出了一种基于影象直方图小波变换的影象分割方法，并从理论上给出了使用该法所得分割门限的物理意义。实例表明，这种由粗到细引导的多分辨率分析方法，对于复杂影象的分割具有较强的鲁棒性和有效性，克服了传统分割方法中的参数需要人工确定的缺点。     

PAM、PNaA和P(AM-NaA)水凝胶微观形态的分形研究

用辐射聚合方法合成的丙烯酰胺、丙烯酸钠的均聚物及其共聚物水凝胶，借助于扫描电子显微镜技术观察了组成不同的干态水凝胶聚合物的微观形态特征，探讨了不均匀的微观交联网络的分形特性，用分形维数对水凝胶聚合物的微观网络的致密程度进行了量化表征。结果表明，分形维数能够从整体上定量地表征水凝胶聚合物的不均匀微观网络之间随组成改变而产生的细微差异，而且，样品的微观网络愈致密则其分形维数值愈大。     

西北江三角洲来水来沙的非线性分形特征

根据西、北江干流高要、石角及西北江三角洲网河区顶点马口、三水四个水文站的流量和含沙量资料 ,应用非线性分形原理的R S方法 ,计算西北江干流及西北江网河区顶点四个水文站的流量、含沙量的赫斯特数H和分形维数D ;探讨西、北江干流来水来沙的分形特征及西北江三角洲的分水分沙规律。结果表明 ,流量的分维数略大于含沙量的分维数 ,三水站流量及含沙量的分维数与其上游的石角站流量、含沙量的分维数相差较大 ,与思贤的分水分沙造成西北江的水沙交换有关     

基于分形理论的供应链管理模型分析

为了克服日益复杂的供应链问题,在分形理论的基础上介绍了分形供应链的概念和特点,认为分形供应链所具有的自相似、自组织、自优化等特点可以很好地提高供应链的灵活性,增强适应环境的能力.在此基础上进一步研究了分形供应链的结构模型和运作模型,探讨了其现实意义.     

基于自适应四叉树分形图像编码的数字水印技术

提出了一种基于自适应四叉树分形编码的数字水印技术。对原始图像进行四叉树分形编码后，通过给定子块在不同的寻找区域中搜索其最佳匹配父块来嵌入水印。实验结果表明，本方法在嵌入水印编码时间、图像质量和鲁棒性方面均比传统的方法有较大的改进。