材料韧性断裂的细观力学分析与测试

应用细观力学的观点分析材料韧性断裂方面的独到之处及便利，并结合高强铸铁细观力学的断裂判据——临界空穴扩张比的测试研究，介绍了作者在应用细观力学研究高强铸铁韧性断裂方面所做的工作及进展     

Influence of interfacial strength on the fracture toughness of glass-ceramic matrix composites

Nine kinds of glass-ceramic matrix composites with different compositions and interfacial strength (τ _s) were prepared. The influence of τ _s on the fracture toughness(K _1c) of composites was studied. It was discoved that, for the system no chemical reaction taking place at the interface, K _1c increased proportionally with τ _s increasing at the first stage, then decreased when τ _s reached a certain value. According to this result, a model of relationship between τ _s, thermal mismatch (Δα _r) and K _1c was built up. If a chemical reaction took place and a new phase was formed in the interface, the K _1c of composite was effected by the combination of τ _s, chemical bonding, radial interfacial stress and other factors. Project supported by the National Natural Science Foundation of China Synopsis of the first author Wang Lingsen, professor, born in 1938, current research field: special ceramic and ceramic matrix composite, etc.     

Q345C低合金高强度结构钢板的试制

介绍采用氧气顶吹转炉→吹氩喂丝→板坯连铸→控制轧制生产Q345C低合金高强度结构钢板的生产工艺。通过对化学成分的合理设计及制订适合该厂冶炼、连铸、轧制的工艺，采取微合金化和控轧控冷相结合的有效技术措施，提高钢板的综合性能，特别是低温冲击韧性。生产的Q345C钢板，其产品质量完全符合GB／T1591—94标准要求。     

磨粉机轧辊失效机理及提高使用寿命的途径

本文探讨了磨辊的磨损失效机理。用扫描电镜分析磨粉机轧辊的磨面和磨屑,提供了疲劳脱落和不均匀磨损的证据。侧磨试样发现磨辊亚表层显微裂纹,珠光体抑制渗碳体中裂纹的扩展。 经变质处理,在硬度变化不大情况下提高铸铁冲击韧性。磨损试验表明,相对耐磨性随韧性提高而提高,硬度与相对耐磨性并非线性关系,硬度与韧性相匹配的材料具有良好的抗磨性,装机试验比原材料磨辊使用寿命提高30％。     

抗层状撕裂钢16MnR—Z25的研制

舞钢首次为需方提供的１６ＭｎＲ－Ｚ２５钢板用于连铸机设备，通过试制和生产，舞钢已向需方提供了２０～１２０ｍｍ九个厚度规格的１６ＭｎＲ－Ｚ２５钢板，对该钢的研制与生产，说明所制定的工艺是可行的，在严格执行生产工艺的前提下，钢板质量，各项性能均满足技术条件的要求，并有一定的富裕量。     

Effect of niobium on thermal stability and impact toughness of Nd-Fe-B magnets with ultra-high intrinsic coercivity

The effects of Nb on the thermal stability and impact toughness of ultra-high intrinsic coercivity of Nd-Fe-B magnets were investigated.The results showed that the addition of Nb could improve the thermal stability,and obviously increased the impact toughness of sintered Nd-Fe-B magnets.The optimum thermal stability of sintered Nd-Fe-B magnets was obtained when the content of Nb was 1.0 at.%.The maximum impact toughness of sintered Nd-Fe-B magnets was obtained when the content of Nb was 1.5 at.%,but the magnetic properties of sintered Nd-Fe-B magnets drastically deteriorated when the content of Nb increased from 1.0 at.% to 1.5 at.%.The microstructure showed that overfull Nb addition made many ultra-fine grains get together,which led to the density of sintered Nd-Fe-B magnets decline and drastically deteriorated the magnetic properties of sintered Nd-Fe-B magnets.     

单试样三点柔度法测金属材料JR曲线及其条件起裂值

在单试样卸载柔度法及单试样三曲线法基础上,提出了一种更简便的测定金属材料ＪＲ曲线及其条件起裂值的单试样三点预先度法,并用该方法测定了１Ｃｒ１／２Ｍｏ钢、１６ＭｎＲ风和ＷＣＦ６２钢的ＪＲ曲线及其条件起裂值,与标准的多试样法相比,误差均在工程许可范围内。     

金属材料断裂韧度JIC试验方案研究

鉴于多数断裂韧度JIC试验无法按GB／T2038—1991测出结果，对JIC试验方案进行了分析，探讨了在JIC测试中存在的问题并应用GB／T2038—1991和GB／T2038—1980进行了相应的试验。结果表明，按照GB／T2038—1991标准试验的可行性与材料的有效屈服强度有关；采用GB／T2038—1991标准测出的JIC值一般比旧标准偏大；GB／T2038—1991已经不能适应材料发展的需要，迫切需要修订和完善。     

人工水晶的压痕断裂行为及其 K_(1c)测量

藉助于声发射技术,研究了在 Vickers 钻石压头作用下人工水晶的压痕断裂行为。压头对角线与晶体试样的相对取向是,使得水晶Ⅰ和水晶Ⅱ的压痕诱发径向/中位断裂,分别沿着(10(?)0)/(1(?)10)和(11(?)0/(1(?)00)晶面对发展。压痕断裂过程中的声发射特征表明,除了随着压痕特征参数的发展所引起的准静态—声发射外,有三个相互独立的,与径向/中位裂纹的成核、径向/中位裂纹突入试样表面、以及裂纹分岔或侧向裂纹萌生等过程相关的声发射效应。以 Vickers 压痕技术测得 K_(c2)的结果与以一般力学法及 Knoop 压痕技术的测试结果作了比较。断裂韧性与晶体学取向的关系亦作了分析。实验表明,水晶Ⅰ和水晶Ⅱ具有相同的 K_(1c)值。其原因是,两种试样的径向/中位裂纹实际上沿着同样的{1100}/{1120}晶面对扩展。至于从缺口梁法或 Knoop 压痕技术得到的 K_(1c)值,由于水晶Ⅰ和水晶Ⅱ的主裂纹分别沿着(1(?)10)和(1(?)00)晶面扩展;它们的 K_(1c)值与断裂能随着晶体学取向而变有关,因而也就各不相同。