从氯化铅渣中回收铅铋的研究

本文以柿竹园有色金属矿粗铋火法精炼、气化除铅产出的铅渣为原料，在常压下采用氯化钠水溶液进行浸出处理，有效地分离了铅和铋，并将铅制成了化工产品黄丹及硫酸铅     

在高速气流粉碎作用下PVC的力化学降解及形态变化的研究

通过ＧＰＴ、ＦＴ－ＩＲ、ＳＥＭ和力学性能测试，研究了在高速气流作用下聚氯乙烯（ＰＶＣ）的力化学降解反应、颗粒形态和微晶结构变化及其对ＰＶＣ物理、力学性能的影响。实验结果表明，经过高速气流处理ＰＶＣ，分子量将有所降低，晶体结构发生变化，颗粒尺寸和表观密度降低，比表面积增大，加工性能和力学性能得到明显改善。     

Viscous behaviour of glass-forming liquids: a thermodynamic approach

The temperature dependence of the viscosity of the undercooled melts exhibits an important role in the study of nucleation, crystal growth and the glass-forming ability of materials. Several attempts have been made to study the viscous behaviour of the glass-forming melts and these investigations are mainly based on free volume theory as well as on the configurational entropy model. In the present investigation, an attempt has been made to correlate the thermodynamic parameters with the viscosity of the glass-forming melts and to study the temperature dependence of the viscosity of undercooled liquids on the basis of the free volume theory as well as on the basis of the configurational entropy model of Adam and Gibbs. The entire study is confined on the expression for thermodynamic parameters reported by the authors recently. The expression obtained has been successfully applied to study the temperature dependence of the viscosity of the metallic, molecular and oxide glass-forming liquids.     

Factors Affecting 1-Octen-3-ol in Mushrooms at Harvest and During Postharvest Storage

Harvesting experiments revealed that immature whole mushrooms with closed veils had higher 1-octen-3-0l levels than more mature whole mushrooms with open veils. The l-octen-3-01 content of the gills was higher in immature mushrooms with closed veils, gradually decreased with maturity as the veil opened, and finally increased after the gills were well exposed. Postharvest experiments demonstrated that storage temperature influenced the activity of lipoxygenase-hydroperoxide lyase, but no differences in 1-octen-3-01 content were observed. Enzyme activity as well as 1-octen-3-01 content decreased during storage. Addition of calcium chloride to irrigation water, employed to improve quality and shelf life of fresh mushrooms, increased the amount of l-octen-3-01 immediately after harvest.     

Pitting corrosion of Cr–Mn–N steel in sulphuric acid media

The resistance to pitting corrosion of austenitic stainless steel Cr18Mn12N has been studied in model solutions of sulphuric acid (0.5 m) containing chloride ions (0.5 m). The cyclic potentiodynamic method has been employed to investigate the effects of chloride ions and agitation rate on the pitting and repassivation potentials. Electron and optical microscopy, electron diffraction spectroscopy and atomic absorption spectrometry have been used to detect the surface sites for pit formation and the growth of pit nuclei. The results obtained with chromium–manganese–nitrogen steel have been compared with those of austenitic Cr18Ni9 stainless steel. A similarity in pit initiation is established, while steel composition exhibits no significant effect. Cr18Mn12N steel is less prone to repassivation as compared with Cr18Ni9 steel.     

自由电子激光光导效应数值研究

本文对喇曼型自由电子激光光导效应进行了理论研究和数值模拟。我们编写了轴对称的二维计算机程序(FELOG),用来研究无波导和有波导情况下的光导效应。对光场分布、光场半径、填充因子及等效折射率等进行了模拟。根据实验参数进行的模拟结果与实验结果进行比较,它们符合很好。并对影响光导效应的因素进行了分析。     

镀锌层上有机物无铬钝化涂层的耐蚀性

选择了一种无毒的水溶性丙烯酸树脂（AC）加入至钼酸盐、磷酸盐中（M）得到一种钝化液（ACM），对镀锌层进行钝化处理以代替有毒的铬酸盐钝化。通过盐雾试验、扫描电镜、电化学测试等手段，研究了该纯化膜的耐蚀性及耐蚀机理。结果表明，热浸镀锌层采用该无毒钝化液进行钝化，可以推迟镀锌层出现白锈的时间，其抗蚀性已接近铬酸盐钝化水平；ACM钝化膜耐蚀性的提高是由于钝化膜中的钼酸盐与丙烯酸树脂产生交联作用，抑制钝化膜裂纹的扩展，同时由于膜层中钼酸盐的缓蚀作用，提高了镀锌层的抗蚀性。     

催化氧化法合成脂肪醇醚羧酸盐的研究进展

详细介绍了氮氧自由基催化氧化法和贵金属催化氧化法合成脂肪醇醚羧酸盐。氮氧自由基催化时,反应温度20～60℃,反应时间3～6 h,得到酸型产品。贵金属催化剂中,钯的催化活性比铂高。贵金属催化时,加入铅、铋等助催化剂,并以活性炭为载体,碱性条件下于50～90℃反应2～6 h,得到盐型产品。在适当的条件下,这两种方法均可使醇醚转化率达95％,选择性达90％以上。     

丙烯酰胺-二甲基二烯丙基氯化铵反相微乳液体系的制备及表征

采用石油醚为连续相、失水山梨糖醇酐单油酸酯(Span80)和聚氧乙烯失水山梨醇单硬脂酸酯(Tween80)为复合乳化剂、正己醇为助乳化剂,建立了丙烯酰胺(AM)和二甲基二烯丙基氯化铵(DMDAAC)反相微乳液体系。使用Zeta电位/粒度/相对分子质量分析仪对该体系的形成及聚合过程中乳胶粒子粒径及其分布进行了测试。实验结果表明,当体系达到微乳液状态时,体系主要由10~100nm的单体微珠及少量粒径小于10nm的胶束组成;随聚合过程的进行,胶束消失,乳胶粒子体积增大。乳胶粒子体积的增大主要是通过扩散和碰撞两种机理完成的。最佳的复合乳化剂亲水-亲油平衡值为8.045,复合乳化剂在油相中的质量分数为33%,助乳化剂在油相中的质量分数为1.6%。在此条件下达到微乳液状态时的水相增容体积最大。