A method of estimating the standard gibbs free energy of formation

Standard Gibbs free energy of formation (ΔG_f⁰), an important property needed in design calculations has been estimated using molar refraction, R_M. The linear relationships derived between ΔG_f⁰ and R_M tested with the data on 8 series of hydrocarbons at 228 compounds yielded average deviations comparable to the methods cited in recent literature. The method can be used as an alternative to the existing ones, because of its simplicity combined with reasonable accuracy.     

无间隙原子钢的微观结构特征和塑性应变比

采用Ｘ射线衍射的ＯＤＦ和ＬＰ分析技术，ＳＥＭ电子通道花样和蚀坑技术观测，研究了超深冲无间隙原子钢板的微观结构特征。结果表明：控制化学成分、保证基体纯净、优选工艺参数，促进强的γ－〈１１１〉∥Ｎ．Ｄ纤维织构的形成是获得优异成型性的关键。用ＣＭＴＰ方法，由ＯＤＦ织构数据从理论计算了塑性应变比（ｒ），表明ｒｍ值高达３．１８。文中讨论了再结晶织构形成机制。     

挖掘机工作装置实验样本长度确定方法及程序系统

本文通过对某液压挖掘机工作装置实验样本长度的研究,详细讨论了样本长度的确定方法,重点分析了趋势曲线拟合法,提出了样本长度精度区间分析的方法,并在处理大量实验数据的基础上,从载荷分布及寿命估算的角度做了实际的验证.编制了应用程序,使样本长度确定至寿命估算整个过程程序化.     

Improvement of the methods of reproducing and transferring the dimensions of the unit of sound pressure in an aqueous medium under free-field conditions

Methods of reducing the predominant components of uncertainty in standards of sound pressure in an aqueous medium in a free field, and also methods of increasing the accuracy when the dimensions of the unit of a physical quantity are transferred by the means employed in natural measurements are reviewed. __________ Translated from Izmeritel’naya Tekhnika, No. 8, pp. 59–63, August, 2007.     

超越离合器内星轮对数螺旋楔合面的设计

通过对采用平面楔合面内星轮的超越离合器的受力及磨损对其使用可靠性影响的分析，从而提出了用对数螺旋楔合而代替平面楔合面的设计方案，并对两种方案进行了比较。     

Construction of transmission lines above valuable standing timber

Problems with the construction of transmission lines above a forest are examined. Construction of lines above standing timber makes it possible to shorten the length of the route, eliminate the clearing of a continuous swath along the line, and reduce the volume of in-service work. To implement this solution, it is necessary to introduce changes and supplements to existing regulatory technical documents. __________ Translated from élektricheskie Stantsii, No. 10, October 2007, pp. 48–51.     

Activity measurement of the constituents in molten Fe–B and Fe–B–C alloys

The distribution ratios of Fe and B between molten Fe–B alloy and molten Ag were measured at temperatures between 1573 and 1923 K. Also, distribution ratios of Fe and B between molten Fe–B–C_satd. alloys and molten Ag were measured at 1873 K. It was found that the excess Gibbs free energy of mixing in molten Fe–B and Fe–B–C alloys can be expressed by utilizing the Redlich–Kister polynomial. The activity curves of the elements in molten Fe–B alloy and Fe–B–C alloy were estimated.     

Silver electrodeposition from air and water-stable ionic liquid: An environmentally friendly alternative to cyanide baths

The influence of temperature on the kinetics and the morphology of silver deposits obtained from an air and water-stable ionic liquid (the 1-butyl-3-methyl imidazolium tetrafluoroborate) was studied by means of cyclic voltammetry and chronoamperometry. The nucleation and growth mechanisms have been investigated and the effect of temperature evaluated up to 200 °C. Dense, pure and very thin (about 0.3 μm) silver coatings, with decorative properties, have been obtained on commercial copper electrodes at different temperatures. The characterization of the deposits morphology has been performed by visual investigation and SEM microscopy. Data about thickness were acquired by Calotest® measurements. The deposits result constituted by pure silver as determined by combination of EDX microanalysis and Auger Electron Spectroscopy (AES). The deposition method promises to be a new, environmentally friendly, method for silver electrodeposition which is the reason for the absence of cyanide and volatile toxic solvents in the electroplating bath.     

光纤光栅的长度对其峰值反射率的影响

利用耦合模理论,数值分析了当光纤光栅(FBG)折射率变化为均匀分布、直流切趾高斯分布时,光纤光栅长度对其峰值反射率的影响。研究结果对光纤光栅外腔半导体激光器的设计和性能优化具有重要的意义。