Molecular association complex of urea with polyethylene: 3. Structural studies of the complex

The crystal structure of urea-polyethylene complex in the hexagonal form, obtained by one of our preparation methods, is analysed by X-ray power diffractometry. In this analysis, the fixed molecular parameters of urea are used, and three models with respect to rotational disorder of the guest polyethylene molecule are assumed. It is shown that the host lattice structure constructed by urea molecules is essentially the same as that of urea-n-paraffin complex. Effects of the disorder structure of the guest on X-ray scattering of the complex are presented. However, there is a difficulty in identifying the disorder structure by X-ray analysis. With the aid of a potential energy calculation between the hexagonal urea tunnel and the guest molecule, a rotational disorder model is preferred.     

无机复合混凝剂ISF-01处理日用化学工业废水的研究

研究了新型无机复合混凝剂ISF-01对日用化学工业废水的絮凝、破乳效果及混凝剂用量和体系pH值对混凝效果的影响,并与其它无机絮凝剂进行了比较。试验结果表明．ISF-01混凝剂有较宽的pH适用范围,对日用化学工业废水具有良好的混凝效果,与传统混凝剂相比,它具有破乳性能好、投药量少、絮体沉降速度快、上清液透光性能好的特点。     

异核双金属化合物Cp(CO)2Fe-Sn(CH2 CMe2Ph)3的合成与晶体结构

以四氢呋喃为溶剂 ,合成了含Sn、Fe的环戊烯基二羰基铁的异核双金属化合物 ,并对配合物进行了元素分析、IR光谱分析 ,使用SimensP4单晶衍射仪测定了配合物的晶体结构。结构分析表明 ,该配合物属于三斜晶系 ,空间群P - 1。晶胞参数 :a =10 0 79(2 )A° ,b =10 975 0 (10 )A°,c =17 14 5 (3)A° ;a =82 0 30 (10 )° ,β =77 770 (10 )°,γ =6 3 70 0 (10 )° ,Z =2     

新型表面活性剂——烷基糖苷的合成与应用研究

以EDTA、十二烷基苯磺酸钠和磷酸为主要成份的复合催化剂，采用直接苷化法了十二烷基葡萄糖苷（C12－APG），考察了此非均相反应体系中的反应温度、反应时间、催化剂用量以及醇糖比对反应过程的影响，实验结果表明，在最佳的工艺条件下，反应时间为3．5h，糖苷得率可达到132．4％，并对其重用机理和所合成糖苷的应用性能了进一步探讨。     

无机物——聚醋酸乙烯复合乳液粒子结构及主要性能

本文对均聚醋酸乙烯乳液及其与无机物的混合物,无机物——聚醋酸乙烯复合乳液的粒子结构进行了比较,阐述了复合乳液的主要性能。     

关联基础设施系统脆弱性分析

鉴于基础设施系统对社会生产和人民生活的重要性,分析基础设施系统的脆弱性,提出相应的抗干扰措施和改进策略,提高基础设施系统的可靠性,成为了当前研究的一个热点课题。基于此,在对基础设施系统脆弱性分析成果的基础上,从方法论的角度探讨了关联基础设施系统的脆弱性,并以华中地区某城市电力—供水网络为例分析了网络在节点级联故障下的脆弱性,为控制基础设施系统的级联故障、增强系统的抗干扰能力提供决策支持。     

基于CPLD的光电编码器角位移拟合测速法

针对常用的M法和T法无法满足增量式光电编码器整个测速范围内误差要求的问题,提出了对码盘信号进行角位移拟合求采样时刻即时速度的新方法,在匀加速条件下对这3种方法进行了仿真实验,比较了测速误差。实验结果表明,角位移拟合法在整个速度范围内都能获得很高的测速精度和误差一致性。最后用CPLD对该方法加以实现,给出了Verilog硬件描述语言的设计程序和3种方法的实验结果比较。基于CPLD的实现方法电路简单,运行稳定可靠,处理速度快,为角位移拟合法提供了一种非常好的实现方法。     

Enhanced Photocatalytic Hydrogen Evolution Over CaTi1−x Zr x O3 Composites Synthesized by Polymerized Complex Method

The solid solution of CaTi_1−x Zr _x O₃ (x = 0–0.15) was successfully synthesized by the polymerized complex (PC) method. This study has exhibited the advantage of the PC method to prepare a highly active CaTiO₃ compared with the conventional solid-state reaction (SSR) method. More importantly, further improvement in phase purity and large surface area was achieved by the doping of Zr⁴⁺, leading to remarkable enhancement of photocatalytic activities compared to pure CaTiO₃. The quantum yield for H₂ evolution over the most active photocatalyst, Pt (1.0 wt%)/CaTi_0.93Zr_0.07O₃, was 1.91% and 13.3% in photoreactions from pure water and aqueous ethanol solution, respectively for 0.1 g photocatalyst, which was about 3.3 and 2.5 times compared to that of PC-derived CaTiO₃.     

Study on the polymerization of ϵ‐caprolactam in the interlamellar spaces of [TEACOOH]–montmorillonite intercalations complex and its characterization

The polymerization of ?‐caprolactam between the interlamellar spaces of the [TEACOOH]–montmorillonite intercalations complex was attempted using Na–montmorillonite and 10‐carboxy‐n‐decyltriethylammonium bromide to achieve [TEACOOH]–polycaprolactam–montmorillonite, in which montmorillonite (inorganic polymer) is chemically bonded with the polycaprolactam (organic polymer). The results of X‐ray and IR analysis for the samples obtained after polymerization showed that the polymerization reaction has been successfully accomplished. For the purpose of studying the polymeric reaction product more precisely, we have isolated the polymerized product from the silicate layers and analyzed it with X‐ray diffractometer and IR spectrometer. Comparison of the results of X‐ray and IR analysis between the isolated polymer and the polymer that was synthesized by the reaction of ?‐caprolactam only with the organic cation without montmorillonite showed that both obtained polymers are the same compounds. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1904–1910, 2003     

硅溶胶—苯丙乳液复合路标涂料的研制

采用正硅酸乙酯(TEOS)为主要原料,以聚合溶胶法制备硅溶胶,制得的硅溶胶与苯丙乳液冷拼复配得到复合基料,再以该基料制得硅溶胶—苯丙复合路标涂料。通过正交试验分别确定了制备硅溶胶、硅溶胶—苯丙复合乳液和硅溶胶—苯丙复合路标涂料的最优方案。