Review of Arthur R. Jensen (2006)--Clocking the mind: Mental chronometry and individual differences.

Reviews the book Clocking the Mind: Mental chronometry and individual differences by Arthur Jensen (see record 2006-20276-000). Mental chronometry, as Arthur Jensen stresses, is the study of reaction time (RT) in its various guises, contexts, and applications. As with respect to much of experimental psychology (cognitive and other), there is a venerable past here lying in the background, providing a wide-ranging context in which to embed our current (that is, our 40-odd year) preoccupation with RT as a primary dependent measure in cognitive psychology. This recent book, Clocking the Mind: Mental Chronometry and Individual Differences (published by Elsevier), weds both differential psychology's concern with the measurement of individual differences in RT (e.g., Austin, Deary, Gibson, McGregor, & Dent, 1998) and experimental psychology's concern with "the effects of manipulating various external conditions on variation in the measurements of RT" (p. 1). The reader of this journal will most probably be more familiar with the latter use of RT in the literature, especially when embedded within such familiar experimental tasks as those tapping both Garner and Stroop effects (Pansky & Algom, 1999). The book should be perused with care in order to ensure the further profitable use of RT in both experimental and differential lines of research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

辽河催化裂化澄清油中间馏分热反应研究

采用先加入絮凝剂脱灰，再经减压蒸馏切割420～500℃馏分的方法，将辽河催化裂化澄清油预处理，考察了澄清油、加入絮凝剂脱灰后的澄清油以及脱灰后再减压蒸馏所得的中间馏分这3种原料在热转化过程中中间相的转化历程，并采用偏光显微镜观察热转化产物。结果表明，澄清油预处理效果明显，所得中间馏分具有较低的H／C原子比（nH／nC）和适宜的组成分布，是生产针状焦的理想原料。热转化产物的光学组织结构属于各向异性发达的广域-流线型结构。     

环己酮肟液相重排反应机理及动力学研究

研究了环己酮肟重排反应生成己内酰胺的机理及反应动力学方程。在建立用分光光度法测定环己酮肟浓度方法的基础上,实验研究了反应温度为20~45℃范围内的液相重排反应动力学。提出了此反应的化学反应动力学速率方程式: -r肟= k0exp (-E/RT)Ca肟Cb硫酸,其中环己酮肟反应级数a为2,硫酸反应级数b为1,活化能为-E/R = -19.86 kJmol-1, 频率因子k0为1.35×1027。通过实验研究证实了作为催化剂的硫酸参与重排反应的机理,认为重排反应过程中游离SO3不参与反应,仅作为水的吸收剂,此结论对环己酮肟液相重排反应的生产技术改造提供了有力依据,并在生产中得到了应用。     

近10年中国润滑脂产量与品种构成的发展

基于对中国27个润滑脂生产厂的调查统计结果，综述了1992～2001年10年间中国润滑脂产量、生产规模、品种结构及包装形式的发展变化情况，展望了今后的发展趋势。     

以杂多酸为催化剂合成乙二醇-乙醚的研究

研究了杂多酸催化无水乙醇和环氧乙烷(EO)制备乙醇乙醚的醚化反应,考察了不同种类的杂多酸以及醚化反应工艺条件对反应活性和选择性的影响.结果表明,PW_(12)催化剂的反应活性高、反应温度低、选择性好,当用PW_(12)作催化剂,乙醇与环氧化乙烷之比为3.0(mol),反应温度45℃,反应时间1h时,转化率和选择性均超过97%.     

Action of chelators on solid iron in phosphate-containing aqueous solutions

To study the effect of strong iron-ligands on steel corrosion, mild steel electrodes were immersed in solutions containing 20 mM phosphate buffer (pH=7.2) and between 0.01 mM and 1 M of either the iron(II)-chelators 2,2^′-bipyridine or FerroZine, or the iron(III)-chelators citrate or acetylacetonate. Resulting surface reactions were investigated by quantifying the electrochemical potential (E), the electrochemical polarization resistance (R_p), the corrosion current (I_corr) and the release of iron into solution. The surface was further analyzed by scanning electron microscopy (SEM/SEM-EDAX) and atomic force microscopy. Concentrations of 0.1 mM of any of the chelators led to slight, temporary changes in E, I_corr and R_p. Concentrations of 10 mM resulted in characteristic changes of E, which were the same for all chelators and in the precipitation of FePO₄ in the case of citrate and acetylacetonate, or vivianite [Fe₃(PO₄)₂ · 8H₂O] in the case of bipyridine and FerroZine. Concentrations of 1 mM of both iron(III)-chelators led to a temporary drop of E similar to that found with 0.1 mM chelator. With iron(II)-chelators, E dropped to about −500 mV before oscillating for several days. The amplitudes of the oscillations were up to 200 mV with periods of 30 and 20-25 min for bipyridine and FerroZine, respectively.     

甲醛与甲酸甲酯的偶联反应 Ⅰ.杂多酸的催化作用

研究了４种杂多酸（磷钨酸、硅钨酸、磷钼酸和硅钼酸）对甲醛和甲酸甲酯偶联反应的催化作用；对反应条件进行了考察。结果表明，磷钨酸和硅钨酸对该反应具有较高的催化活性；而氧化性强的钼系杂多酸的活性较低。水对甲醛和甲酸甲酯的偶联反应具有不利影响。将杂多酸在３００℃进行热处理后，其活性显著增强。     

采用活性非均匀分布催化剂中变反应器的模拟计算

模拟计算表明:采用活性趋于表层的分布,可以较明显地提高国产中温变换催化剂的内表面利用率,有效地节省催化剂用量,而对“热点”温度没有多大影响。     

钨系延期药预点火反应机理研究

通过程控升温模拟点火条件，根据ＤＳＣ图谱分析，找出主要反应区的温度范围。研究结果表明，钨系延期药预点火反应是一个真正的固－固反应。     

激光法合成SiC超细粉末物理化学过程的研究——Ⅰ.实验规律及粉末特性

用50W连续波CO_2激光器为热源,诱发SiH_4和C_2H_4反应,合成SiC超细粉末。实验确定了反应腔体内压力p、气源中的C/Si原子比、喷嘴内径2r以及激光功率密度与粉末特性之间的关系,并对合成的产物进行物理、化学表征。