科研项目管理信息系统的设计

介绍了用自顶向下的结构化方法进行科研项目管理信息系统设计的过程。该系统的应用节省了大量人力、物力和财力,提高了企业科研项目管理水平。     

Periodic surface modeling for computer aided nano design

Current solid and surface modeling methods based on Euclidean geometry in traditional computer aided design are not efficient in constructing a large number of atoms and particles. In this paper, we propose a periodic surface model for computer aided nano design such that geometry of atoms and molecules can be constructed parametrically. At the molecular scale, periodicity of the model allows thousands of particles to be built efficiently. At the meso scale, inherent porosity of the model represents natural morphology of polymer and macromolecule. Surface and volume operations are defined to support crystal and molecular model creation with loci and foci periodic surfaces. The ultimate goal is to enable computer assisted material and system design at atomic, molecular, and meso scales.     

GSM技术在配电网故障自动隔离及恢复系统的应用

为了使配电网故障的隔离和恢复的通讯更加可靠、迅速、经济，设计了一种基于GSM通讯技术，借助移动通讯系统短信业务和数据业务，实现配电网故障的自动隔离与恢复的系统。该系统通过MCU采集数据，判断故障位置与故障类型，经GSM通讯模块上传主站，主站统筹全局，实现故障段的切除，非故障区的供电。阐述了系统的工作原理、硬件结构、通讯协议和软件流程。现场的实际运行情况证明数据上报通讯准确率为100％，多次模拟线路故障，根据故障点的不同，一般在2～3min内系统都能可靠的隔离故障，恢复系统。     

紧凑 Tokamak(球形环)聚变堆第一壁及中心导体柱上中子负荷及核热计算与分析

采用通用蒙特卡罗粒子输运程序ＭＣＮＰ／３８计算低环径比Ｔｏｋａｍａｋ（紧凑环或球形环）聚变堆第一壁及中心导体上的中子壁负荷分布和核热沉积分布，并与常规Ｔｏｋａｍａｋ堆第一壁上中子壁负荷分布和核热沉积分布进行比较、分析。结果表明，在中子壁负荷归一化为１ＭＷ／ｍ２时，与常规Ｔｏｋａｍａｋ相比，在低环径比Ｔｏｋａｍａｋ堆第一壁及中心柱表面上中子壁负荷分布峰值并不比常规Ｔｏｋａｍａｋ堆第一壁上的峰值高，而且低于低环径比Ｔｏｋａｍａｋ堆整个第一壁上的平均值，而中心柱上的核热沉积峰值稍高于常规Ｔｏｋａｍａｋ堆第一壁上的核热沉积峰值，但对较高中子壁负荷情况，中心导体柱上的核热沉积和辐照损伤仍可能是比较严重和值得特别研究的问题。     

Multiobjective dynamic load-dispatching method for optimal operation of power systems

A new practical method is proposed which gives a quasi-optimal solution of the dynamic load-dispatching problem formulated by a multiconstraint multiobjective optimization problem. Here, the multiple constraints are rate reserve constraints and power flow ones, and the multiple objectives are fuel cost and CO₂ emission. The proposed method is an integration of the following three techniques: (1) “Group Dispatch Scheme,” which is developed by the authors, is used to satisfy a violated constraint easily. This scheme consists of three steps. The first step is to classify all generators into two groups. One is the group which should be more loaded to satisfy the violated constraint, and the other is the should-be less loaded group. The second step is to add some load to the former group, and to subtract the same load from the latter. The third step is to dispatch each group load to each groups generators, respectively; (2) the dynamic load-dispatching algorithm is used which provides, in practical time, quasi-optimal generation trajectories; (3) the conventional weighting parametric method is used to obtain a Pareto optimal solution of multiobjective problems. The effectiveness of the method is clarified by a computer simulation on the actual power system of Kansai Electric Power Company.     

适用于LED显示屏或照明工程的异步控制卡DS2000-M1

DS2000-M1是高性能、开放式的LED控制系统,本文从软硬件两方面简述其设计原理。     

透水性沥青面层材料设计新法及应用

本文提出了一种根据主骨料空隙率设计透水性面层沥青混合料级配的新方法，根据这一方法设计的透水性沥青面层具有良好的路面使用功能，应用前景广阔。     

瓶组气化站的建筑、结构设计要点

瓶组气化站的建筑，结构设计关系到安全，满足使用要求和投资的大小，本文根据多年的实践和最新的有关设计规范的要求，阐述瓶组气化站建筑，结构设计的要点。     

基于VC＋＋的仿真训练系统编程

给出了以PCI-I64IOT型I/O卡为核心的硬件接口电路和软件设计思想,详细分析了编程方法。实践表明,利用该系统能完全实现侦察专业的全部训练科目,满足部队和院校训练的需要。