双氧水冷漂助剂液中润湿剂的分离和鉴测

双氧水冷漂助剂液中的润滑剂——烷基硫酸钠可以在四级氧化铝柱上用氯仿和乙醇—水的淋洗体系进行分离而获得纯品;用NMR和GC法进行结构分析;两相滴定法测定其含量。     

中原高温高盐油藏疏水缔合聚合物凝胶调剖剂研究

针对中原油田高温(>80℃)、高盐度(>50 g/L)、高硬度(>1 g/L)砂岩油藏,研制了地下成胶的高热稳定性聚合物凝胶调剖剂。所用聚合物为疏水缔合聚合物AP-P4,M=9.0×106,HD=27%,疏水基摩尔分数0.2%;交联剂为可生成酚醛树脂的3种化合物;调剖剂胶液用矿化度160 g/L的马寨油田污水配制;实验温度95℃。根据形成的凝胶黏度(95℃,1.1 s-1)确定交联剂各组分用量为:MZ-YL 0.429%,MZ-BE 0.060%,MZ-XS 0.012%;酸度调整剂用量0.12%;成胶时间10~15小时。2.5、3.0、3.5 g/L AP-P4的凝胶在95℃老化100天后黏度保持在~40 Pa.s及以上。初配制胶液在3000 r/min下剪切15分钟后黏度降低87.5%~89.0%,但成胶后和老化过程中凝胶黏度只比未剪切样降低17.1%~6.6%。3.5 g/L AP-P4的调剖剂对~1μm2的6支储层岩心的堵塞率在88.1%~95.8%范围,平均93.3%,造成的残余阻力系数在15.2~28.6范围,平均19.8,使渗透率级差2.3~8.0的4组双人造岩心的注水流量比发生不同程度的反转。认为该凝胶调剖剂高温下稳定性好的原因,是强化学交联密度低,因而凝胶脱水收缩作用弱。图2表5参5。     

房地产中介服务业存在的问题和改进建议

本文就房地产中介服务业在政府机构管理、行业经营方面存在的问题进行了总结,同时提出一些改进建议,对于房地产中介服务业规范经营、健康发展具有很好的指导意义。     

DCA-112催化裂化抑焦剂的工业应用

针对改善催化裂化反应微环境研制开发的DCA - 112催化裂化抑焦剂 ,具有抑制生焦、改善产品分布、应用流程简单、加注方便等特点 ,经中石化长炼分公司 1Mt/a重油催化装置工业应用表明 ,在相近的工艺条件下 ,掺渣比提高 4 13个质量百分点 ,总液收提高 1 0 2个质量百分点。     

An investigation of carbon nanotube jet grinding

Since their observation in 1976 and 1991, carbon nanotubes (CNTs) have generated much interest due to their properties and potential applications. CNTs are tubular carbon molecules with remarkable mechanical, electrical, chemical and thermal properties, which make them useful in various applications. Industries producing CNTs via the fluidized bed chemical vapor deposition technique face challenges related to the size of CNT bundles. The two main challenges are agglomeration and agglomerate size distribution control. A solution to these challenges involves the use of jet mills to grind the CNT agglomerates. The goal of this study was to determine whether the nanotubes could be ground with air jets using a commercial jet mill and apply a two-parameter model to describe the grinding process. The present study has indicated that air-jet grinding of CNTs is feasible with a typical commercial jet mill. This paper presents the effect of operational parameters on the arithmetic mean diameter of the ground product. Sonic velocity through the grinding nozzles was required to obtain reasonable grinding rates and relatively narrow particle size distributions. This occurs at high air to solids feedrate ratios. Additionally, a simple attrition model can describe the grinding process in the spiral jet mill.     

光谱法快速测定土壤中的多个微量元素

本法采用碳酸钡、氟化锂、石墨粉作缓冲剂，用锑做铅锌的标．用铪作铌的内标，用钯作铍、铬、镧、锶、铜的内标。采用小孔电极，交流电弧做为激发光源，同时测定铅、锡、锌、铍、铬、镧、铌、铜、锶等九个元素。分析数据基本稳定．能达到土壤样品的检出限要求。     

Stateful session handoff for mobile WWW

This paper proposes a web session handoff system that can hand over not only stateless but also stateful sessions between homogenous and heterogeneous user devices to enable uninterrupted and seamless web access. The proposed system adopts a proxy-based approach and an optional client-assisted scheme in order to track and hand over session information. In the proposed system, a session is registered at a User Agent Proxy (UAP) and then tracked by the UAP so that the session can be handed over from one device via the UAP to another device. In addition to session information tracked by a UAP, the UAP can hand over more comprehensive session information by using the client-assisted scheme. Compared with client-based approaches, our design has several advantages, such as less modification to user devices, practicability, and fault tolerance. We have implemented a UAP on a PC and client programs for both PC and PDA. The implementation can successfully hand over between PC and PDA a stateful session for online shopping applications.     

焊补法带压堵漏技术与不停车带压堵漏技术的应用

介绍了传统的焊补法堵漏及目前常用的不停车带压堵漏技术的基本原理、操作步骤以及密封剂类型，并对两种方法进行了比较。     

Kinetic study of the decompositions involved in the thermal degradation of commercial azodicarbonamide

The transitions and reactions involved in the thermal treatment of several commercial azodicarbonamides (ADC) in an inert atmosphere have been studied by dynamic thermogravimetry analysis (TGA), mass spectrometry and Fourier transform infrared (FTIR) spectroscopy. A pseudo‐mechanistic model, involving several competitive and non‐competitive reactions, has been suggested and applied to the correlation of the weight loss data. The model applied is capable of accurately representing the different processes involved, and can be of great interest in the understanding and quantification of such phenomena, including the simulation of the instantaneous amount of gases evolved in a foaming process. In addition, a brief discussion on the methodology related to the mathematical modeling of TGA data is presented, taking into account the complex thermal behaviour of the ADC. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

磨矿分级自动控制系统在选矿厂的运用

介绍了磨矿分级自动控制系统的控制原理、功能，以及在实际生产中的应用效果，以期推动磨矿自动系统在矿山中的应用。