硬质合金刀具电解磨削工艺研究

阐述了电解磨削硬质合金刀具的原理、特点及工艺。并对其工艺机理及影响因素进行了探讨。     

30CrMnSiNi2A钢件镀硬铬的氢脆分析

本文叙述了用延迟破坏法试验超高强度钢(υb=1700MPa)不超过三次镀硬铬的氢脆情况。     

激光熔覆模压硬质合金粉末层的研究

利用液压机和简易模具直接将硬质合金粉末(25? 15%Co 60% WC)压制在碳钢基体上;采用大功率CO2激光器对预置层进行扫描,在一定工艺参数下得到了表面较为平整、无裂纹、与基体形成良好冶金结合的涂层;利用扫描电镜和显微硬度计对涂层进行成分、形貌和显微硬度分析.结果表明,在相对较软的涂层基体上分布着高硬度的条状碳化物及少量的鱼骨状共晶体.涂层的平均硬度达到56HRC.     

GRINDING RESIDUAL STRESS OF CEMENTED CARBIDE

Grinding residual stress in the surface layer of WC-6 Wt—％Co hard alloy was measured by means of X-ray diffraction. The effects of various grinding parameters and treatment processes on the stress were studied. By means of electrolytic etching, the stress distribution along the depths beneath the surface was measured. The relationship between the stress and the service life of the alloy is discussed.     

Effect of binder-phase modification and Cr3C2 addition on properties of WC-IOC0 cemented carbide

For production of fine-grained and corrosion-resistant tungsten carbide (WC) based cemented carbides, addition of chromium carbide (Cr₃3C₂) in small amounts is standard practice. No systematic study, however, has been made of the effects of large additions (maximum 6 wt % ) of Cr₃C₂ as a substitute for tungsten carbide. This study focuses on the effect of hard-phase substitution by C₃C₂ in WC-1OCo cemented carbide. An attempt is also made to modify the binder metal cobalt by partial or complete substitution of nickel. Specimens were prepared using the standard liquid-phase sintering process and were tested for sintered porosity, mechanical properties, corrosion resistance, and microstructural parameters. Results confirm the findings of earlier workers regarding grain refinement and improvement of mechanical properties upon the addition of small amounts (<2 wt%) of Cr₃C₂. Modification of the binder phase improves indentation fracture toughness and corrosion resistance. Addition of Cr₃C₂ independent of the binder type improves corrosion resistance.     

全球铝轧制工业概览系列综述之九——日本神户钢铁公司真冈铝板带轧制厂

对日本神户钢铁公司枥木县真冈轧制厂的方方面面作了较全面的介绍，并对神户钢铁公司与美国铝业公司的合资企业－－神钢－美铝铝业有限公司作了附带的描述。这两家企业都是从上世纪70年代以来新建的高起点、高水平、高标准、高质量的世界级的铝板带轧制厂，前者的建设时间历20余年，是一步一步壮大的，原来（1＋3）式热连轧生产线，后改为（1＋4）式的，还有进一步改为（1＋5）式的余地。这是一个综合性强的铝板带加工厂，除生产罐料处，还可生产各种热处理可强化的硬合金板带材。该厂可作为中国今后建设全新的大型现代化铝板带轧制工程的模式。     

稀土添加剂在镀硬铬中的应用

介绍了标准镀铬液中加入稀土添加剂进行低铬酸镀硬铬工艺及应用生产情况,以及取得的经济效益。     

底轴翻转闸在支漳河生态整治工程中的应用

为了同时满足蓄水、防洪、通航和城市景观的要求,经过比选确定了底轴翻转闸在邯郸市支漳河生态整治工程中的应用,并阐述了底轴翻转闸在施工过程中的控制重点和技术难点,为类似的水利工程项目提供了借鉴。     

引水济湖工程措施的生态环境影响评价方法

在湖泊引水方案和二维环境流体动力学模型影响预测计算结果的基础上,提出引水后湖泊环境生态影响预测评价方法:①从湖泊水景的自然度、自净(健康)度、景观度、亲水度、连通度5个方面,构造了引江济湖工程对湖泊生态-环境-景观综合影响指数评价法;②从水环境质量、生物多样性、防洪排涝、景观生态结构等方面应用质量指标法进行工程对湖泊健康综合影响评价。实例应用表明,两种评价方法可以对湖泊引水影响效果进行科学评价,结论也比较一致,为正确实施引水济湖方案提供了科学评估方法和依据。     

多操作系统的安全组建与维护

介绍了多操作系统安装的必要性,分析了计算机的启动过程,结合运用常用的磁盘分区工具,对硬盘分出多个主分区和扩展分区,利用GAG系统引导管理软件,在计算机启动时激活不同的主分区,从而达到启动不同操作系统的目的。另外还介绍了系统的维护和一些注意事项。