Wettability of Lithium by Liquid Sodium, Potassium and Rubidium

The wettability of the lithium surface by liquid alkali metals Na, K and Rb is investigated for the first time by the sessile drop method in an all-soldered instrument under conditions of a high vacuum. The presence of the temperature threshold of wetting is found in Li–Na and Li–K systems at temperatures of 325°C and 160°C, respectively. A conclusion is drawn that an abrupt decrease in wetting angles in the investigated systems is associated with a marked decrease in the interfacial tension at lithium-lithium, lithium-potassium, and lithium--rubidium interfaces owing to the beginning of a noticeable mutual solubility of the components at relatively high temperatures.     

Analysis of the Ductile Strength of Welds Weakened by Notches in Longitudinally Welded Pipes of Large Diameter by the Method of Slip Lines

We study the stressed state of an inhomogeneous welded joint containing an interlayer of a more high-strength material under the action of tensile loads. It is assumed that the contact boundary has a cracklike defect. We deduce analytic dependences of the fracture load on the mechanical inhomogeneity of the joint, thickness of the interlayer, and depth of the defect. The maximum depth of the defect to which the joint is insensitive is established. The proposed theoretical results are innovative and agree with the experimental data obtained for specimens cut out from a pipe of 14KhGS steel.     

就地补偿在动力厂水泵电机上的应用实例

就我公司动力厂给水车间155kW水泵电机无功就地补偿的可行性及经济效益进行了分析和研究，对工厂用电如何节能降耗有一定的参考价值。     

高分子量丙烯酰胺-DAC共聚物的研制

采用复合引发体系 ,以丙烯酰胺 (AM)和阳离子单体丙烯酰氧乙基三甲基氯化铵(DAC)为共聚体 ,进行水溶液绝热聚合 ,研制了一种DAC单体含量为 4 0 %～ 5 0 %、相对分子质量大于 1× 10 7的阳离子型聚丙烯酰胺。     

高碳铬铁电炉炉衬的损坏及维护

叙述了重钢公司几个高碳铬铁电炉使用全印度粉矿在冶炼过程中炉衬的损坏情况及其原因，提出了炉衬维护中应注意的几个方面。     

电厂回热系统优化运行

本文分析了高压加热器不能正确投入运行的原因，并提出了相应的改进和优化措施。     

Limit load analysis of strength undermatched welded T-joints under bending

An increasing amount of laser beam welded T‐joints (e.g. skin‐stringer) of aluminium alloys are now in use in advanced fuselage applications designed as ‘integral structures’ for weight and cost savings. It is known that weld joints generally show lower strength (undermatching) than base metal in both laser beam and friction stir welded joints of 6xxx series Al‐alloys. Damage tolerance considerations in terms of the residual strength of such joints require limit load solutions to be used in engineering fitness‐for‐service (FFS) analysis. The paper, therefore, provides an upper bound limit load solution in closed form for welded T‐joints (idealized) with strength undermatching and subject to a bending moment. In addition to the necessary requirements of the upper bound theorem, the kinematically admissible velocity field chosen leads to a stress field, which satisfies the equilibrium equations and some stress boundary conditions in the plastic zone. This is an advantage of the solution and, therefore, it is expected that the upper bound obtained is close to the exact limit load of such joints.     

Reliability Analysis of Single-Degree-of-Freedom Elastoplastic Systems. II: Suboptimal Excitations

A method for constructing an approximation of the critical excitation that drives an elastoplastic system from rest to a target threshold at a specified time instant, referred to as the “suboptimal excitation,” is presented in this paper. It is based on the observations gained from study of the critical excitations in the companion paper. Essentially, for the usual case of interest where the failure time is not small compared to the natural period, the duration of the positive and negative pulses of the critical excitation are roughly equal to half of the natural period. This consideration allows for a simple intuitive approximation of the critical excitation. The amplitudes of the positive and negative pulses are obtained in closed forms using energy balance. Numerical investigations show that the critical excitations are well approximated by the suboptimal excitations.     

The Holographic study for the high T_c superconductor YBCO and recent development of studies of a class of inverse problems

A dream or interesting problem is to obtain more information based on one measurement,for example to obtain all the thermodynamic functions based on specific heat only. We call it“holographic“study.After more than 10 year‘s efforts,we suggest one possibility(or only one)is to solve an inverse problem(specific heat-phonon spectrum inversion,SPI).In this talk we will review recent development of studies of a class of inverse problems,including Dai‘s exact solution and Chen‘s formula and their unification.T...     

A longitudinal examination of the social-cognitive model applied to high school girls' choices of nontraditional college majors and aspirations.

This study tested a partial version of R. W. Lent, S. D. Brown, and G. Hackett's (1994) social-cognitive career theory model. Among 204 high school girls who attended science, math, and engineering (SME) career conferences, the authors used a 4-year longitudinal design to predict the choice of an SME college major and SME self-efficacy and outcome expectations in college. In addition, among students who had declared SME majors, variables assessed in high school and college were used to predict aspirations to become leaders in SME fields. The results generally provided empirical validation of the model. Regression analyses revealed that college SME outcome expectations were associated with plans to become a leader in an SME field. Implications for research and interventions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)