电弧喷涂铝青铜复合涂层的抗高温氧化作用与机理

采用铝青铜底层,外加厚度为0.1～0.2 mm的纯铝涂层可进一步地提高涂层体系的抗氧化性能.900 ℃加热12 h的10次循环氧化试验结果表明,纯铝层的应用有助于提高铝青铜涂层的自封孔能力,在涂层表面形成的增厚富铝氧化膜以及在涂层基体界面上形成的富铝氧化层都对钢铁基体的防护有利.复合涂层体系与试件基体结合可靠,没有早期失效迹象,是一种有希望的高温防护涂层体系.     

淬硬工具钢内圆表面磁性研磨加工实践与研究

磁性磨料研磨是一种较新的光整加工的方法，它是在S、N两极之间加入磁性磨料，磁性磨料吸附在磁极和工件表面上，并沿磁力线方向排列成有一定柔性的“磨料刷”，工件一边旋转，一边做轴向振动，以达到去除表层金属的目的，使工件表面粗糙度大大下降。本文介绍了磁性磨料研磨的加工原理，对工件在磁场中的受力情况进行理论分析。对淬硬工具钢(T8A)工件内圆表面进行磁性磨料研磨的加工试验．得出了不同的磁感应强度，不同加工间隙，以及不同研磨时间对加工表面粗糙度和研磨量的影响；从而得出了优化的磁性磨料研磨的加工参数：磁感应强度B=1．0—1．2T；加工间隙△=1-3mm；研磨时间t=4—5min。     

The Microstructure and Mechanical Properties of the Low Carbon Microalloy Steel by High Voltage Electropulse Heating

The low carbon microalloy steel samples were heated to different temperatures by high voltage electropulse discharge heating method. The temperature of sample increases with the discharge current density. Microstructures were observed by using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Results show that coexist microstructure of ultrafine ferrite grain and martensite can be obtained by proper high voltage electropulse discharge heating process parameter. The tensile testing indicate that better mechanical properties were obtained, including 758MPa yield strength, 796MPa ultimate strength and 12% total elongation.     

铍的焊接缺陷及其控制技术研究

加填充材料焊接铍是防止铍焊缝开裂的技术措施之一,但加填充材料对铍进行高能束焊接可使焊缝形成钎接焊.介绍了铍焊接时生成的缺陷,主要有焊接裂纹、气孔、夹杂、未焊透和热影响区的晶粒长大等,全面系统地总结了铍焊接形成的各类缺陷,减轻和消除焊接缺陷的各种试验技术.在焊接参数试验的过程中,避开对焊接裂纹敏感的脉冲焊和深熔焊接工艺参数,可使铍的焊接缺陷（特别是焊接裂纹）明显地减少.     

微量Zr对Al-5.8Cu-0.3Mn合金焊接接头组织与性能的影响

采用4047焊丝对Al-5．8Cu-0．3Mn铝合金进行熔化极惰性气体保护焊，利用金相显微镜、透射电镜、显微硬度等检测分析手段研究了Zr对Al-5．8Cu-0．3Mn母材及焊接接头的力学性能和显微组织的影响。结果表明，Al-5．8Cu-0．3Mn合金中添加适量Zr元素可使母材强度提高30MPa，焊接接头强度提高50MPa，同时，细化了母材的再结晶组织和焊缝组织。焊接接头的强度低于母材强度，焊缝区是合金的薄弱处，热影响区强度降低是θ‘相粒子受热粗化所致。     

16Co14Ni10Cr2Mo钢制飞机零件真空热处理工艺

１６Ｃｏ１４Ｎｉ１０Ｃｒ２Ｍｏ钢是国外广泛地用于制造飞机重要受力构件的一种经双真空冶炼的新型超高强度结构钢。作者经过试验优选了该钢的真空热处理工艺并用于生产。试验证明：该钢经真空热处理后，表面光亮，无氧化脱碳，且基本上不变形，工艺重现性好。     

FeAl/FeAlSi非对称膜材料的制备及膜基结合性能

目的制备高温腐蚀环境下应用的Fe Al/Fe Al Si非对称膜材料,研究膜与基体的结合性能。方法采用粉末反应合成法制备大孔径、高孔隙度的FeAlSi多孔体作为支撑体,通过浸渍法在支撑体表面制备小孔径的FeAl涂层作为膜层,再经烧结得到Fe Al/Fe Al Si非对称膜材料。研究Fe Al/Fe Al Si非对称膜材料的孔结构性能及膜基结合性能。采用XRD和SEM研究多孔膜材料的物相组成及微观形貌,采用孔结构测试仪及压汞法测试支撑体与膜层的孔结构参数,采用拉伸法和反吹实验研究Fe Al/Fe Al Si非对称膜材料的膜基结合性能。结果 Fe Al/Fe Al Si非对称膜材料表面膜层均匀、完整,膜层与支撑体之间具有冶金结合。支撑体的孔隙度和平均孔径分别为43.0%和22.7μm,膜层的孔隙度和平均孔径分别为36.5%和7.5μm。当膜层厚度增加时,膜材料的透气度下降,最大孔径在一定膜层厚度范围内变化不大,当膜层厚度在150～300μm范围内时,最大孔径约为7.8μm。膜层与支撑体的结合强度大于5.5 MPa。结论浸渍法制备的Fe Al/Fe Al Si非对称膜材料的孔结构性能优异,膜基结合性能满足工业应用。     

激光熔覆用高硬度铁基合金的研究与应用

研究了激光熔覆Fe-Ni-Cr—B—Si合金粉末时粉末中的碳含量对于熔覆层组织、开裂敏感性、硬度和硬度均匀性的影响。结果表明，粉末含碳量的微小变化能显著改变熔覆层的组织和性能；在相同工艺条件下，粉末含碳量在一定范围内可显著提高熔覆层的硬度、降低熔覆层开裂敏感性，从而获得高硬度无裂纹的熔覆层；碳含量的增加可提高熔覆层的硬度均匀性。本文还报道了用自制Fe基合金粉末成功修复大型轧辊的实例。     

High-temperature oxidation of pure titanium in CO2 and Ar-10%CO2 atmospheres

The oxidation behavior of pure titanium has been investigated in the temperature range of 1000 K to 1300 K in CO₂ or Ar-10%CO₂. Optical microscopy, electron probe microanalyses, and X-ray measurements on the oxide scales formed during oxidation indicate that their structures are nearly independent of temperature and the corrosion atmosphere. The scales consisted of two layers, an external one and an internal one, having a rutile (TiO₂) structure. The parabolic rate law was confirmed for growth of the external scale and the permeation depth of oxygen in titanium with apparent activation energies of 266 and 226 kJ/mol, respectively. The rate-determining diffusion species in the oxidation processes are discussed.     

Study on interfacial structure and strength of Si_3N_4/Ti/Cu/Ti/Si_3N_4 PTLP bonding

0IntroductionRecently,the development of bonding technique ofhigh temperature structure ceramic Si3N4becomes a hottopic in the field of ceramic bonding[1].Partial transientliquid phase bonding(PTLP)has been applied in the fieldof high temperature ceramic bonding and made some pro-gress.The selection of interlayer materials is key to PTLPbonding.Since Bender discovered that Ag-based brazingmaterial including Ti could wet ceramic in1954,morestudies have shown that Ti has good wetting prope…