Preparation of phenolic resin derived 3-D ordered macroporous carbon

Three-dimensionally ordered long-range macroporous carbon structures were prepared using commercially available phenolic resin by utilizing sacrificial colloidal silica crystalline arrays as templates that were subsequently removed by HF etching after pyrolysis in an argon atmosphere. SEM, TEM, and BET were employed to characterize the morphology and the surface area of the porous carbon structures. The pore size (150–1000 nm) and BET surface area, which reflect pore volume (298.6 m²/g (1.32 cm³/g) ∼ 93.7 m²/g (0.12 cm³/g)), of the macroporous carbon structures produced were approximately proportional to the size (150–1000 nm) of the sacrificial silica sphere templates used (annealing temp. 550°C). The achieved 550 nm porous carbon structures were examined to function as potential catalyst carriers and were successfully impregnated with Ag or Pt-Ru on their inner walls after borohydride reduction at room temperature. In addition, porous carbon patterns were fabricated using the ‘micromolding in capillary’ technique, which has potential applications in the microreaction technology.     

广角摄像机在机器人视觉定位中的应用

为了保证广角摄像机在现代机器人视觉定位应用中的准确性,以广角摄像机像素坐标的反畸变过程为研究对象,提出一种在畸变对应表的基础上使用中心迭代法以及区域插值法确定物体实际位置的方法。通过实验证明了该方法能够测量物体的位置,其精度能够满足工业使用要求。     

电解法处理利福霉素SV钠废渣分离液的研究

根据电化学原理，采用电解法，利用铁屑与炭粒作电极，处理利福霉素SV钠药渣分离液，讨论各种因素对分离液污染物作效果的影响，COD去除率可达91．8％左右，脱色率可达95％左右。     

Correlation of reactivity and electrical resistivity of coke

A correlation between the reactivity and electrical resistivity of a series of cokes was determined using cokes prepared from blends of medium- and high-volatile coals. After correcting for the ash yield of the coke and the density of the resistivity specimen, a statistically significant relation between reactivity and resistivity was established. As the resistivity test requires much less time to perform than the reactivity test, it can be considered as an alternative approach to reactivity testing currently performed for quality control purposes.     

胶层厚度对拉伸试样应力分布影响的数值分析

运用弹塑性有限元法研究了胶层厚度对承受拉伸载荷的对接接头胶层内应力分布的影响．三维有限元法数值分析的结果表明，随胶层厚度减小，胶层中正应力SZ与剪应力SYZ的分布趋于均匀；而对正应力SY而言，胶层厚度为0．15mm时，其边缘峰值应力最低。     

Discrete element approach for mine dump stability analysis

Mine overburden dumps have posed significant safety issues in the operations of various unit operations of open pit min-ing especially the external dumps. The external dumps are composed of a mixture of fragmented rocks and loose soil. Their charac-teristic is comparable to heavily discontinuous solid mass. The conventional approach of limit equilibrium methods provide safety factors for the slope but nothing about the stress-strain characteristics of the large dump mass. The designs of dump location and their respective geometry are integrated for the know-how of the stability characteristics of these dumps. The discrete element method uses a circular disk to represent the granular solid mass and their interactions are described by the Newton's third law of motion. The displacement is described by the sliding of the circular disk. This work is focused on the modeling efficiency of the discrete element methods to represent the behaviour of mine dump masses with the specified joint plane for the limit equilibrium method. The advantage of the work lies on the ease of information retrieval at any point at the dump mass concerning the stress and strain histories, displacement, failures etc. which when integrated produces a better understanding of the stability of the dump masses.     

GCr15轴承钢连铸过程中热物性参数的研究

借鉴前人实验数据,采用一定的数学方法,对轴承钢的热物性参数进行了研究.结果表明：GCr15轴承钢的液相线温度为1 465.7℃,固相线温度为1 328.4℃,零强度温度为1 380℃左右,零塑性温度为1 330℃左右;在固相区、液固两相区、液相区分别采用不同的公式进行处理,可使结果更加准确,还避免了奇异性.研究结果可为轴承钢连铸工艺有限元模拟提供基础.     

韧性断裂准则在板料成形中应用研究进展

对板料成形中的成形极限应力图、最大变薄率、成形极限图以及韧性断裂准则等预测成形极限的方法进行了综述和分析,提出了利用韧性断裂准则能够较好地预测塑性差的板料成形极限,而且还能考虑应变路径的变化.利用有限元方法模拟时,韧性断裂准则既可以运用到完全耦合的弹塑性损伤模型的增量方法中,也可以运用到一步有限元逆算法中.指出了为准确地预测成形极限,除了提高有限元模拟精度外,应找到一种本质地反映材料性能的准则.     

有限体积法求解立体角离散误差

为解决采用有限体积法求解辐射传输方程时引起离散误差的问题,从有限体积法立体角内热流密度的求解过程出发,运用泰勒级数推导了近似误差的表达式,并分析影响离散误差的各种因素,包括离散射线数,辐射强度分布,假散射及网格比.根据分析结果,采用辐射强度的连续分布模型,模拟了各种因素对误差的影响.结果表明,辐射强度的分布函数对于有限体积法的离散误差有一定程度影响.当增加网格数及减小网格尺寸比时,可以有效地减小离散误差.假散射与离散误差间呈较强的非线性耦合关系.     

新型钢铅组合耗能器性能试验及参数优选

为了考察新型钢铅组合耗能器(NCSLD)的力学性能和提高其耗能能力,利用电液伺服压剪试验机对NCSLD耗能器进行力学性能试验,采用ANSYS实体建模的方法对耗能器进行大量的数值分析,并对性能试验和数值分析的结果进行对比,研究耗能器的滞回特征参数与其6个几何参数之间的关系,回归出二者之间的公式.提出评价耗能器性能优劣的标准及其附加条件,并以此标准为依据,利用均匀设计法和遗传算法分别对耗能器的6个几何参数进行优选.结果表明遗传算法的选优效果要好于均匀设计法,同时得到一系列性能良好的NCSLD耗能器.