A socio-technical approach to post-occupancy evaluation: interactive adaptability in domestic retrofit

Understanding the process of domestic retrofit is important for learning and innovation. This is particularly the case for low carbon retrofits such as those undertaken under the UK's Retrofit for the Future (RftF) programme, with its aim to achieve an overall 80% carbon reduction by 2050. Current post-occupancy evaluation (POE) research has both theoretical and methodological limitations with implications for technical and behavioural research in the built environment. Drawing on relevant ideas and concepts from social practice theory and science and technology studies, principally prefiguration (constraints/enablement), black-boxing, heating and cooling practices, this paper demonstrates how the relationship between buildings and people could be reconceptualized as mutually constitutive and co-evolving through a process of ‘interactive adaptation’. The concept of ‘interactive adaptation’ is explored through a novel approach to integrating physical and social data collected from a sample of dwellings selected from the RftF programme. Analysis yields insights into the influences and pathways of interactive adaptation resulting from retrofit technology and practices. The implications of these insights for policy-makers, the research community and practitioners are discussed: end-use energy demand policy needs to be informed by a socio-technical approach.     

Thermal management of solar cells using a nano‐coated heat pipe plate: an indoor experimental study

With temperature increasing, the photovoltaic efficiency of solar cells is reduced significantly. Such an efficiency loss may offset the efficiency improvement because of the development of the photovoltaic technology. This paper provides a novel approach for efficiency loss recovery of solar cells. Specifically, a nano‐coated heat pipe plate was integrated with the solar panel to remove heat from the hotspots on solar cells. This study concerns the indoor experiments of a commercial solar cell thermally managed with a heat pipe plate. The temperature rise and non‐uniformity on the solar panel were quantified in different light irradiances. With thermal management by the heat pipe plate, the solar panel shows a temperature‐rise reduction of 47–50%. This implies that half of the efficiency loss of the solar cell can be recovered. In addition, the temperature variation within the solar panel is reduced to 1.0–2.5 °C, which is beneficial in prolonging the longevity of the solar cell. In the experiments, the heat pipe plate can provide a cooling flux of 380 W/m² with light irradiance below 1000 W/m². By incorporating the heat pipe plate with a water jacket, the heat removal flux could be improved to 600 W/m², leading to a solar cell temperature of a few degrees higher than the ambient. Copyright © 2016 John Wiley & Sons, Ltd.     

Real-time characterization of aerosol particle composition,sources and influences of increased ventilation and humidity in an office

Most of human exposure to atmospheric pollutants occurs indoors, and the components of outdoor aerosols may have been changed in the way before reaching indoor spaces. Here we conducted real-time online measurements of mass concentrations and chemical composition of black carbon and the non-refractory species in PM_2.5 in an occupied office for approximately one month. The open-close windows and controlled dampness experiments were also performed. Our results show that indoor aerosol species primarily originate from outdoors with indoor/outdoor ratio of these species typically less than unity except for certain organic aerosol (OA) factors. All aerosol species went through filtration upon transport indoors. Ammonium nitrate and fossil fuel OA underwent evaporation or particle-to-gas partitioning, while less oxidized secondary OA (SOA) underwent secondary formation and cooking OA might have indoor sources. With higher particulate matter (PM) mass concentration outdoors than in the office, elevated natural ventilation increased PM exposure indoors and this increased exposure was prolonged when outdoor PM was scavenged. We found that increasing humidity in the office led to higher indoor PM mass concentration particularly more oxidized SOA. Overall, our results highlight that indoor exposure of occupants is substantially different from outdoor in terms of mass concentrations and chemical species.     

Association of size‐fractionated indoor particulate matter and black carbon with heart rate variability in healthy elderly women in Beijing

Associations between size‐fractionated indoor particulate matter (PM) and black carbon (BC) and heart rate variability (HRV) and heart rate (HR) in elderly women remain unclear. Twenty‐nine healthy elderly women were measured for 24‐hour HRV/HR indices. Real‐time size‐fractionated indoor PM and BC were monitored on the same day and on the preceding day. Mixed‐effects models were applied to investigate the associations between pollutants and HRV/HR indices. Increases in size‐fractionated indoor PM were significantly associated with declines in power in the high‐frequency band (HF), power in the low‐frequency band (LF), and standard deviation of all NN intervals (SDNN). The largest decline in HF was 19% at 5‐minute moving average for an interquartile range (IQR) increase (24 μg/m³) in PM_0.5. The results showed that smaller particles could lead to greater reductions in HRV indices. The reported associations were modified by body mass index (BMI): Declines in HF at 5‐minute average for an IQR increase in PM_0.5 were 34.5% and 1.0% for overweight (BMI ≥25 kg/m²) and normal‐weight (BMI <25 kg/m²) participants, respectively. Moreover, negative associations between BC and HRV indices were found to be significant in overweight participants. Increases in size‐fractionated indoor PM and BC were associated with compromised cardiac autonomic function in healthy elderly women, especially overweight ones.     

Ultrafine,fine, and black carbon particle concentrations in California child‐care facilities

Although many U.S. children spend time in child care, little information exists on exposures to airborne particulate matter (PM) in this environment, even though PM may be associated with asthma and other respiratory illness, which is a key concern for young children. To address this data gap, we measured ultrafine particles (UFP), PM_2.5, PM₁₀, and black carbon in 40 California child‐care facilities and examined associations with potential determinants. We also tested a low‐cost optical particle measuring device (Dylos monitor). Median (interquartile range) concentrations for indoor UFP, gravimetric PM_2.5, real‐time PM_2.5, gravimetric PM₁₀, and black carbon over the course of a child‐care day were 14 000 (11 000‐29 000) particles/cm³, 15 (9.6‐21) μg/m³, 15 (11‐23) μg/m³, 48 (33‐73) μg/m³, and 0.43 (0.25‐0.65) ng/m³, respectively. Indoor black carbon concentrations were inversely associated with air exchange rate (Spearman's rho = ?.36) and positively associated with the sum of all Gaussian‐adjusted traffic volume within a one‐kilometer radius (Spearman's rho = .45) (P‐values <.05). Finally, the Dylos may be a valid low‐cost alternative to monitor PM levels indoors in future studies. Overall, results indicate the need for additional studies examining particle levels, potential health risks, and mitigation strategies in child‐care facilities.     

Survey of 1012 moldy dwellings by culture fungal analysis: Threshold proposal for asthmatic patient management

Different countries have tried to define guidelines to quantify what levels of fungi are considered as inappropriate for housing. This retrospective study analyzes indoor fungi by cultures of airborne samples from 1012 dwellings. Altogether, 908 patients suffering from rhinitis, conjunctivitis, and asthma were compared to 104 controls free of allergies. Portuguese decree law no 118/2013 (PDL118), ANSES (a French environmental and health agency) recommendations, and health regulations of Besançon University Hospital were applied to determine the rates of non‐conforming dwellings, which were respectively 55.2%, 5.2%, and 19%. Environmental microbiological results and medical data were compared. The whole number of colonies per cubic meter of air was correlated with asthma (P < 0.001) and rhinitis (P = 0.002). Sixty‐seven genera and species were detected in bedrooms. Asthma was correlated to Aspergillus versicolor (P = 0.004) and Cladosporium spp. (P = 0.02). Thresholds of 300 cfu/m³ for A. versicolor or 495 cfu/m³ for Cladosporium spp. are able to discriminate 90% of the asthmatic dwellings. We propose a new protocol to obtain an optimal cost for indoor fungi surveys, excluding surface analyses, and a new guideline to interpret the results based on >1000 cfu/m³ of whole colonies and/or above threshold levels for A. versicolor or Cladosporium spp.     

Indoor levels of volatile organic compounds at Florentine museum environments in Italy

Indoor Air Quality monitoring in cultural institutions is of particular concern to protect these places and the cultural heritage content. An indoor monitoring campaign was performed in three museums in Florence (Italy) to determine the occurrence and levels of volatile organic compounds (VOCs). VOCs of interest included BTEX (benzene, toluene, ethylbenzene, xylenes), terpenes, aldehydes, organic acids, and cyclic volatile methyl siloxanes (cVMS). The most abundant VOCs in all samples analyzed were BTEX, which were strictly related to the traffic source, followed by siloxanes and terpenes. Among BTEX, toluene was always the most abundant followed by xylenes, ethylbenzene, and benzene. cVMS in exhibition rooms with the presence of visitors showed higher values compared to samples collected when the museums were closed. Terpenes showed not only the influence of vegetation-biogenic sources surrounding a museum but could also be related to the wood used for the construction of showcases and furniture and the use of cleaning products. Data obtained also showed the presence of organic acids and aldehydes whose source can be traced back to exhibits themselves and wood-based furniture. Assessing the levels of organic acids in museums is important because, over time, it can cause deterioration of the artifacts.     

Effects of air purification of indoor PM2.5 on the cardiorespiratory biomarkers in young healthy adults

Ambient fine particulate matter (PM_2.5), as one of the predominant air pollutants, has achieved effective control in recent years in China. Whether the use of indoor air purifiers is still necessary needs further exploration. A randomized crossover trial was conducted in 54 healthy students in Beijing, China. Participants were randomized assigned to the use of real or sham high-efficiency particulate air filter (HEPA) for a week and changed the status after a washout period. Health measurements of cardiorespiratory biomarkers were performed at the end of each period. Linear mixed-effects models were used to evaluate the association between PM_2.5 exposure and cardiorespiratory biomarkers. Compared with sham air purification, average diastolic blood pressure (DBP), fractional exhaled nitric oxide (FeNO), and 8-isoprostane (8-isoPGF2α) levels decreased significantly in the real purification. The effects of indoor air purification on lung function indicators including forced expiratory volume in one second (FEV₁), peak expiratory flow (PEF), and forced expiratory flow between the 25th and 75th percentile of forced vital capacity (FEF_25%–75%) were also significant. Our findings showed a protective effect of indoor HEPA air purifiers on cardiorespiratory health of young healthy adults reflected by the decreased blood pressure, respiratory inflammation, and systematic oxidative stress and improved lung function.     

Particulate matter emitted from ultrasonic humidifiers—Chemical composition and implication to indoor air

Household humidification is widely practiced to combat dry indoor air. While the benefits of household humidification are widely perceived, its implications to the indoor air have not been critically appraised. In particular, ultrasonic humidifiers are known to generate fine particulate matter (PM). In this study, we first conducted laboratory experiments to investigate the size, quantity, and chemical composition of PM generated by an ultrasonic humidifier. The mass of PM generated showed a correlation with the total alkalinity of charge water, suggesting that CaCO₃ is likely making a major contribution to PM. Ion chromatography analysis revealed a large amount of SO₄²⁻ in PM, representing a previously unrecognized indoor source. Preliminary results of organic compounds being present in humidifier PM are also presented. A whole-house experiment was further conducted at an actual residential house, with five low-cost sensors (AirBeam) monitoring PM in real time. Operation of a single ultrasonic humidifier resulted in PM_2.5 concentrations up to hundreds of μg m⁻³, and its influence extended across the entire household. The transport and loss of PM_2.5 depended on the rate of air circulation and ventilation. This study emphasizes the need to further investigate the impact of humidifier operation, both on human health and on the indoor atmospheric chemistry, for example, partitioning of acidic and basic compounds.     

Assessment of chemical and microbiological parameters of indoor swimming pool atmosphere using multiple comparisons

The aim of this study was to evaluate the air quality of an indoor swimming pool, analyzing diurnal and seasonal variations in microbiological counts and chemical parameters. The results indicated that yeast and bacteria counts, as well as carbon dioxide (CO₂), nitrogen oxides (NO_x) and O₃ concentrations, showed significant diurnal difference. On the other hand, temperature, relative humidity (R.H.), yeast counts and concentrations of CO₂, particles, O₃, toluene, and benzene showed seasonal differences. In addition, the relationship between indoor and outdoor air and the degree of correlation between the different parameters have been calculated, suggesting that CO₂, fine particles and NO_x would have indoor origin due to the human activity and secondary reactions favored by the chemical and environmental conditions of the swimming pool; while O₃, benzene and toluene, would come from outside, mainly. The overall results indicated that indoor air quality (IAQ) in the swimming pool building was deficient by the high levels of CO₂ and microorganisms, low temperatures, and high R.H., because frequently the limits established by the legislation were exceeded. This fact could be due to the poor ventilation and the inadequate operation of heating, ventilation, and air‐conditioning systems.