燃气红外线辐射器的节能与环保特性分析

论述了燃气红外线辐射器的基本原理 ,对其节能与环保特性的分析表明 :与大气式燃烧器相比 ,红外线辐射器的燃料节约率为 15 %～ 45 % ,CO2 排放量减少率为 15 %～ 48% ,CO排放量减少率为 96.2 %～ 97.7% ,NOx 减少率为 94.9%～ 96.9% ,具有显著的节能与环保效果     

离心式高炉鼓风机扩压叶片断裂事故分析及处理

通过高炉鼓风机扩压叶片断裂事故，从化学分析、物理检验，结合使用情况对扩压叶片断裂原因进行了详细分析，并提出了改进措施。     

Thermal Evaluation of Scorched Graphite-Epoxy Panels by Infrared Scanning

A simple measurement system is described for evaluating damage to graphite-epoxy panels, such as those used in high-performance aircraft. The system uses a heating laser and infrared imaging system to measure thermal performance. Thermal conductivity or diffusivity is a sensitive indicator of damage in materials, allowing this thermal measurement to show various degrees of damage in graphite-epoxy composites. Our measurements track well with heat-flux damage to graphite epoxy panels. This measurement system, including analysis software, could easily be used in the field, such as on the deck of an aircraft carrier or at remote air strips.     

Prediction of Undrained Sinkhole Collapse

Sinkholes are surface depressions or shafts resulting from the collapse of a submerged cavity in soil. The cavities that lead to sinkholes form as a result of underlying geology in limestone areas, or as a result of human activity such as mining or leakage from a sewer. The formation of sinkholes is often sudden and can lead to extensive damage and loss of life, especially in urban areas. Much of the literature on the subject of sinkhole formation is empirical in nature, often being associated with specific locations. This paper presents the results of a study, using numerical modeling, of the undrained stability of the submerged cavities that lead to sinkhole formation. Finite-element limit analysis techniques (using programs developed at the University of Newcastle) are used to obtain upper and lower bound values of a suitable load parameter, which bracket the exact solution. The results are compared to analytical solutions, both from literature and derived independently.     

Economic Model to Optimize Underground Utility Protection

The need for better protecting our vital infrastructure from being damaged or destroyed has received increased attention since the terrorist attacks on September 11, 2001. The tragedy of having thousands of innocent people die before the eyes of an entire nation awakened people to the reality of “managed” attacks of unthinkable magnitudes. However, tragedies of a smaller scale are a daily occurrence but accepted as “collateral damage” of work in an unsafe environment. This paper presents a cost-benefit analysis to address the question of how much money should be spent in protecting underground utilities from damage. During the study of an actual incident it was found that the total costs of such accidents are vastly underreported because only costs for emergency responses and repair are tallied up. This paper makes the case that a comprehensive approach for assessing the total economic impact of such incidents on the public, business, and government is the critical stepping stone to a mathematical optimization of expenditure for damage prevention. In addition, the reader will quickly realize that the use of the presented optimization model provides theoretical underpinning for the engineering profession in its effort to better protect our critical infrastructure from terrorist attacks.     

潜油电泵易损零部件失效分析方法

通过对大庆油田近5 a潜油电泵易损零部件的数据统计,应用可靠性分析理论和方法研究了易损零部件的失效规律,得出4大部件的故障率占整个机组系统的91.7%,其可靠度由小到大的次序为电机、保护器、电泵和分离器。在这4大部件中,可靠度较低的零件主要有泵轴、叶导轮、扶正轴承、胶囊和保护器轴,其中泵轴、叶导轮、扶正轴承的主要失效模式是磨损,连接螺栓的主要失效模式是断裂失效。     

Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125     

锅炉炉管爆破原因分析

对在爆裂的水冷壁管正常管段和鼓包处所取的试样分别进行化学分析、金相检验、硬度测定和高温拉伸试验。分析结果表明，在近烧嘴的炉管长期处于超温工作状态，引起该部位材质严重劣化，高温强度不断下降，当该部位的高温强度低于锅炉炉管对材质所要求的技术条件即会发生爆裂。对炉管的继续使用提出了应急的预防措施。     

Copolymerization of bromophenylmaleimide with ethyl or butyl methacrylate

N‐p‐Bromophenylmaleimide (BrPMI) does not polymerize in solution by conventional free radical mechanism. However, it readily polymerized in bulk when mixed with a free radical initiator and heated in a microwave oven for 7–8 min. Copolymerization of ethyl methacrylate or butyl methacrylate with BrPMI was conducted in dioxane. The copolymers were characterized by IR and ¹H NMR spectroscopy and gel permeation chromatography. The monomer reactivity ratios were calculated by a non‐linear least‐square analysis. Thermal analysis indicated a great improvement in thermal stability of the copolymers compared with the methacrylate homopolymers. BrPMI was also polymerized in bulk in the DSC pan, which allowed the calculation of the activation energy of its polymerization. Copyright © 2003 Society of Chemical Industry