Evaporative light scattering mass detection for high-performance liquid chromatographic analysis of sucrose polyester blends in cooking oils

A high-performance liquid chromatographic method is described to determine the sucrose polyester (SPE) content in seven blends of cooking oils. Four gel-permeation chromatography (GPC) columns were used in series with an evaporative light scattering mass detector to separate the SPE from the acylglycerols in the final chromatogram. The SPE fraction was collected off the GPC column and injected onto a reverse-phase C-18 column for quantitation with sucrose octaacetate as an internal standard and a gradient of nonaqueous solvents as mobile phase. The chromatograms were interference-free, with only two sharp peaks appearing. The standards were linear from 500 to 5000 μg/mL with a correlation coefficient of r=0.999. The mean percent recovery (n=9) and standard deviation were 102±6.7. The detector could detect amounts as low as 5 μg SPE.     

基于自由运动一维标定物的多摄像机参数标定方法与实验

一维标定方法易于实现且标定效率高,为了克服现有一维标定方法的一些不足,本文提出一种用一维标定物标定多摄像机内外参数的方法,首先进行两两标定,在此过程中,假定主点坐标近似已知而仅考虑畸变、焦距、旋转和平移等参数,接着利用基本矩阵及一维标定物上特征点之间的几何约束,估计两摄像机的内外参数,两两标定完成后,采用Dijkstra最短路径法和捆绑调整对多摄像机系统进行全局标定(含主点坐标),仿真和真实实验表明本文的方法是切实有效的.     

基于容差关系的不完备信息系统的属性约简

粗糙集理论是一种处理不确定性知识的有效工具,属性约简是其核心内容之一,然而对于属性值有缺省的不完备信息系统,基于等价关系的经典粗糙集理论已经不再适用。由于容差关系下的不完备信息系统的属性约简的定义与经典粗糙集的属性约简定义相似,可以用容差关系对粗糙集理论进行扩充。文中通过定义容差关系下的可辨识矩阵,运用可辨识方法,得到了一种属性约简算法;接着分析了算法的不足之处,并且在此基础上提出了增加约简效率的改进型算法;最后通过一个数值例子,说明了该算法是合理的和有效的。     

实验室用超高温氢气钼丝炉的研制

通过结构设计和负荷计算，研制出适合于实验室使用的以钼丝为电热体，电熔镁砂或镁铝尖晶石为沪芯材料，H2－N2混合气体为保护气氛和最高使用温度达1950℃的内挂式氢气钼丝炉。     

汽车工业生产用热熔胶膜的研制

介绍了汽车工业生产内装饰复合材料用热熔胶膜的性能及其研制状况。这种热熔胶膜具有使用便捷,高效,生产、使用过程中没有污染的具有热熔胶膜的特长。     

N－氰基乙亚胺酸乙酯含量的气相色谱分析

采用GC-900气相色谱仪、3%PEG-12000/Chromosorb880AWDMCS填充柱和FID检测器,以水杨酸甲酯为内标物测定N-氰基乙亚胺酸乙酯含量,回收率在98.5%—101.8%之间,标准偏差为0.27%,变异系数为0.27%。     

Coordination between strategic forest management and tactical logistic and production planning in the forestry supply chain

In this paper, we study the coordination mechanism in the forestry supply chain between strategic forest management and tactical production planning. We first formulate an integrated model to establish a theoretical benchmark for performance of the entire supply chain. It is a mixed integer programming model that involves harvesting, bucking, transportation, production, and sales decisions for both tactical and strategic planning levels. We then present two sequential approaches S‐A and S‐B where the coordination is done through internal pricing. S‐A is the approach currently used in practice where harvesting in the forest is the main driver of the supply chain activities and internal pricing is introduced to control bucking decision in a separate stage. In contrast, S‐B takes downstream demand information into consideration and internal pricing directly influences harvesting decision in the first stage. In order to find the appropriate setting of internal pricing that leads to the system optimum, we suggest two heuristics H‐I and H‐II. The internal pricing in H‐I is based on dual values and in H‐II, it is derived from a Lagrangian decomposition. A real‐life case study in the Chilean forestry industry is used to compare the results of different approaches. It is shown that the new sequential approach S‐B generates as good feasible solution as that obtained from the integrated approach but in much less time. Both heuristics H‐I and H‐II bring about near‐optimal feasible solutions. H‐II also provides optimistic bound of the optimal objective function value, which can be used as a measure of the solution quality.     

聚醚型聚氨酯的氢键、微相分离及性能

用本体一步法合成了5种不同硬段含量(11.0％～46.9％)的二苯甲烷-4,4′-二异氰酸酯/环氧乙烷封端型聚环氧丙烷聚醚/乙二醇的聚醚型聚氨酯,并借助于IR,DSC,DMS和材料试验机等手段对该聚氨酯的氢键、微相分离及力学性能进行了表征。结果表明:随着硬段含量的增加,其>NH与微区中的>C=O的氢键化程度逐渐提高,软段微区中—O—的氢键化程度逐渐降低;微相分离程度逐渐提高;拉伸强度及硬度随之增加,扯断伸长率在硬段含量40％左右出现极大值。