INMARSAT 21世纪工程——全球个人移动卫星通信

本文概述INMARSAT 21世纪工程的规划及为实现这一规划,INMARSAT组织在本世纪末正在进行和即将进行的一系列卫星通信技术工作。着重阐述INMARSAT 21世纪工程的业务性能以及对三种卫星布局方案进行抉择的新动向。     

心电地图仪中工频干扰的一种滤除方法

在心电地图仪中记录到的体表心电信号往往由于电磁的影响而引进工频干扰．基于体表心电信号中工频干扰的特点，作者提出了一种滤除工频干扰的方法，即就单独—胸导联信号通过提高频谱的分辨率来估计工频干扰的频率；基于最小均方误差准则来估计各导联信号中工频干扰的幅度和相位。文中还给出了该算法的流程图和滤波性能分析。模拟结果表明了该算法的有效性。应用该算法对心电地图仪中的工频干扰进行对消，取得了满意的结果。     

千米桥东潜山天然气地球化学特征及成因探索

通过地化分析，结合地质条件等，对千米桥东潜山天然气地球化学特征进行了剖析，并对其气藏的形成进行了探索，结果认为：千米桥东潜山天然气为无机二氧化碳、偏腐殖型有机气，腐泥型有机气的复合气，主源为东部歧口凹陷沿岩带深层（偏）腐殖型气，烃类气体聚集时间晚，为更新世明化镇沉积时其，而无机二氧化碳聚集时间早于烃类气体；与千米桥凝析气藏不同的是该气藏CO2含量高。     

贯彻国际管理标准 提高企业管理水平 增强市场竞争力

通过对质量、环境和职业健康安全综合管理体系一体化进行了深入的剖析和探讨,明确提出了要抓好一体化管理体系这项复杂系统工程,就必须做好以下五个方面的工作.一、推行一体化管理是企业发展的必然趋势,强化一体化管理是推进企业发展、增强企业竞争力的必由之路;二、正确认识和处理五个关系,明确一体化管理的艰巨性是推进企业发展,增强公司竞争力的前提;三、强调五个必须,明确贯标工作的科学性,是推进企业发展、增强竞争力的保证;四、抓好五个落实,明确贯标工作的系统性是推进企业发展、增强竞争力的.     

地球化学录井技术的发展和应用

简要介绍了国内地化录井技术的发展历程，分析了该技术的特点及在油气勘探开发应用中取得的成效。认为中国地化录井技术在引进、消化、吸收的基础上，扩展了该技术的应用领域和范围，目前该专业的整体技术水平处于国际领先地位。在以统计资料及应用实例报道该技术的应用成果及独特技术优势的同时，也分析了存在的问题，指出了解决问题的主要途径。     

热衷于国际标准活动--全球社会标准化机构肩负的任务

根据美国国家标准学会 (ANSI)理事会主席、ISO现任主席OliverR .Smoot在日本东京召开的国际标准化协议会上的讲演整理。     

映射半解析边界元法解瞬态弹性动力问题的有关问题

提出了映射半解析边界元法解百轴对称瞬态弹性动力问题时存在解析方向不能正确反映波的传播现象的问题，产生该问题的原因和如何解决该问题的建议。     

Introduction to geothermal exploration on ascension island, South Atlantic Ocean

The exploration for a geothermal resource on Ascension Island utilized a strategy that initially employed geologic mapping. On the basis of this, subsurface faults were mapped using an aeromagnetic survey. The faults were then explored using electrical resistivity surveys to define areas of potential hydrothermal fluid up-welling. The results of all of these techniques were used to site temperature gradient holes. A deep geothermal exploration well was then drilled in the area with highest heat flow adjacent to a rhyolite-to-trachyte volcanic complex.     

A feasibility study of a direct-mapping parallel processing method to solve linear equations in load-flow calculation

With the growing size and complexity of power systems, system analysis—such as transients calculation—takes much time. Hence, fast calculation methods are required. Although parallel processing is a hopeful method, there have been difficulties in the parallel solution of linear equations which appear in power-flow calculations by the Newton-Raphson method. This paper aims at the fast calculation of the power-flow problem by means of parallel processing. In order to improve the suitability to the parallel solution of the differential equation in transients calculation, we assume the use of a direct-mapping parallel processing machine to map directly the network of a power system onto a network of processors. Under this assumption, we propose a new parallel-processing-oriented method in which the linear equation is solved by linear iterations between nodes with Aitken acceleration. We simulate the method on three model power systems and compare this Parallel Iterative Method (PIN) with a Parallel Direct Method (PDM) which uses the banded matrix according to the number of operations required. As a result, we can expect that PIM may solve linear equations faster than PDM with m processors, although the PIM might be inferior to the PDM with m × m processors, where m denotes the half-band width of the banded matrix.     

A bidding decision index for construction contractors

Results from applying the model on a sample of contractors, the majority of whom were international and operating in Egypt, reinforces the credibility of the developed methodology, claim the authors.