球墨铸铁铁路配件的生产

本文对比了两种铸铁的机械性能,叙述了铸态球墨铸铁铁路配件的生产,分析了球化处理、孕育处理对配件质量的影响。     

矿石微机检测控制系统

为了提高矿山生产的管理水平,微机被应用于坑口矿石检测控制.提出了一个矿石微机检测控制系统,实现矿石的自动检测.从微机、接口部件以及软件等方面,介绍了该系统的设计与实现.该系统已推广使用,取得很好的效果.     

露天磷矿数字配矿模型

露天磷矿选矿厂采用合理的配矿方案,对稳定入选磷矿的品位,增加选矿产率,降低生产成本有着重要的意义.为了提高入选磷矿石品位的均匀性和稳定性,提出了针对以入选磷矿品位为目标的从采矿场配矿到精矿仓配矿的整个生产环节的配矿方法.将采场内原矿、选矿厂原矿矿堆和选矿厂精矿仓均定义为矿堆,按照生产实际需求设定其属性.通过设定目标函数,实现使采矿场的开采原矿量最大,配矿方案总的运输距离最小,运输成本最低等目标.同时建立约束条件,使采矿场的开采原矿量要保证选矿厂正常生产,使每一矿堆的品位达到目标要求.最后,采集企业生产实际数据对模型加以验证,证明模型在指导露天磷矿山的生产过程中有重要的实际意义,配矿过程应成为矿山生产组织、管理的一个重要环节.     

合理调整磷硫矿价确保农肥协调发展

本文阐述了调整磷硫矿价，以确保农肥协调发展的必要性，同时指出了在调价过程中有待解决的几个问题。     

Characteristics of Metal Droplets in Slag Tapped from the Blast Furnace

Slag samples, hot‐metal samples and hot‐metal temperatures were obtained during tapping of two blast furnaces. Sampling was carried out at different time points during tapping of three separate heats. The size distribution and composition of metal droplets found in the slag were determined using scanning electron microscopy. Only metal droplets above 0.75 μm could be counted and analysed. All droplets were below 8 μm in diameter and the great majority of these droplets were found to be between 0.75 and 2 μm. The size distribution did not differ significantly for different slag samples. Iron was the main droplet component. Electron probe microanalysis showed that the droplets contained small amounts of carbon. The percentage of the area in a studied cross‐section that was covered with metal droplets varied between 0.01 and 0.07%. Calculations based on Stoke's law showed that the distance droplets travel in the slag is in the micron range. Slag samples taken in the beginning of slag tapping contained more droplets than those taken in the middle of slag tapping, an indication that most droplets can be found in the area near the furnace wall. Some droplets were determined to have magnesium enrichment at the external surface.     

时间分解光谱技术在钢铁分析中的应用

研究了单火花光谱在不同采样时间段分析灵敏度与窗口的关系,P、S、Al、Ni、Ti、B、Mg、Sb、Pb、As、Bi、Ta、Sn应用TRS技术检出限明显降低,而C、Si、Mn、Cr、Mo、V、W、Co、Nb则不显著;合适的采样窗口能提高Sb的分析准确度,Mg则可减少背景波动带来的影响,Cu可扩大分析线性范围;采用TRS技术在诸有效元素中分析灵敏度可提高1.36～5.00倍,能更好地满足品种钢的研究开发与生产检验的需求.     

电炉还原熔炼氧化钴矿的生产实践

介绍了刚果(金)钴铜冶炼厂电炉还原熔炼处理钴铜氧化矿工艺的设计特点及生产实践。     

矿业软件在矿产储量评价中的应用

矿产储量评价的基本内容是建立矿床地质模型进行品位估计和储量分类分级．地质控制条件限制是矿床建模的重要手段。地质统计学方法是矿块品位估计以及储量分级等的有效方法．国内的应用实例表明。国际先进矿业软件是矿产储量评价的先进工具，应用矿业软件进行矿产储量评价是市场经济的需要。