综合线损分析系统研究

描述了综合线损分析系统应该具有的主要功能和分析内容，介绍了系统实现中应该注意的几个问题、系统内容和实现方法。     

小议变动成本法的合理性

企业对盈亏临界点的计算通常是以变动成本法为基础，但也有以制造成本法为计算基础的，对于这两种成本方法计算的几种盈亏临界点的情况，本文结合案例，通过比较分析认为：盈亏临界点的计算应当以变动成本法为基础更为合理。     

油气吸收回收系统的研究及工业应用——(Ⅱ)工业试验及效果分析

在油气吸收回收系统中型试验的基础上，开发了常温常压吸收法工业化油气回收系统，并进行了工业应用。结果表明，该油气回收系统平均回收率可达95．13％，每年可回收汽油529t；装车期间装车口周围环境大气中总烃浓度平均降低98．06％。企业通过实施油气回收系统，节能及经济效益明显，且很好地改善了装车场所的作业环境，克服了油气排放带来的安全隐患。     

Fire performance of wood (Pinus radiata) treated with fire retardants and a wood preservative

In this work, we co‐formulated an oil‐borne copper naphthenate/permethrin wood preservative system with synthetic polymer‐based fire‐retardant additives prior to the impregnation of Pinus radiata sapwood. We evaluated what effect, if any, the preservative had upon the fire performance properties of the fire retardants and whether the fire retardants impacted on the fungicidal and termiticidal efficacy of the preservative. The fire retardants included halogenated and phosphorus‐based systems. A mass loss calorimeter, in conjunction with a thermopile, was used to measure the time to ignition and the peak heat release rate (PHRR) from which the fire performance index (FPI) was determined. The preservative properties were evaluated using termite and soil‐block decay bioassays. In summary, we found that the rate of fire growth was reduced when the fire retardants were used in combination with the wood preservative. We also found that the PHRR was a better determinant of fire performance than the FPI. The performance of the wood preservative was enhanced against fungal decay and termite attack when used in combination with the fire retardants. The fire retardants also demonstrated some wood preservative properties of their own. Copyright © 2008 John Wiley & Sons, Ltd.     

MC^2电缆介质结构及阻抗分析

本文将用数学和实验两种方法证实MC～2电缆不仅能保证特性阻抗变化不超出电缆技术规范。而且能保证在设计频率范围内电缆结构反射损耗最小。     

Evaluation of Serum Volume Losses During Long-Term Storage

Aliquots of serum collected in a large case-control study of cervical cancer were stored at −70°C for up to 4 years during implementation of the study. When 500 μL serum aliquots were thawed in preparation for carotenoid and vitamin A assays, volumes were noticeably variable and fell below 500 μL in the majority of the samples. We were concerned about evaporation/sublimation during storage of the samples because loss of water would concentrate the analytes of interest. We evaluated the use of density and sodium ion concentration measurements to confirm its occurrence. We found that serum density was an unreliable indicator of extent of volume loss since the anticipated increases in density due to evaporation were of the same magnitude as inter-individual variation in serum density. In contrast, Na⁺ concentration is tightly regulated and would rise if water had been lost from the samples. In a representative sample of serum aliquots from the case-control study, 24 of 25 vials contained less than 500 μL of serum. The mean sodium ion concentration (138.1 ± 3.6 mmol/L) was within the normal range for human serum of 136–145 mmol/L, and no correlation was observed between serum volume and Na⁺ concentration. These results strongly suggest that the observed low volumes were not due to evaporative losses. Instead, the variably low volumes of serum aliquots were probably due to pipetting errors in the initial aliquotting resulting from the use of air-displacement pipettes.     

Artificial Neural Network Modeling of Osmotic Dehydration Mass Transfer Kinetics of Fruits

Artificial neural network (ANN) models were developed for the prediction of transient moisture loss (ML) and solid gain (SG) in osmotic dehydration of fruits using process kinetics data from the literature. ANN models for ML and SG were developed based on data over a broad range of operating conditions and ten common processing variables: temperature and concentration of osmotic solution, immersion time, initial water and solid content of the fruit, porosity, surface area, characteristic length, solution-to-fruit mass ratio, and agitation level. The trained models were able to accurately predict the outputs with associated regression coefficients (r) of 0.96 and 0.93, respectively, for ML and SG. These ANN models performed much better than those obtained from linear multivariate regression analysis. The large number of process variables and their wide ranges considered along with their easy implementation in a spreadsheet make them very useful and practical for process design and control.     

Series resonant ZCS‐PFM DC‐DC power converter with high‐frequency high‐voltage transformer link for high‐power magnetron drive

This paper presents a single lossless inductive snubber‐assisted ZCS‐PFM series resonant DC‐DC power converter with a high‐frequency high‐voltage transformer link for industrial‐use high‐power magnetron drive. The current flowing through the active power switches rises gradually at a turned‐on transient state with the aid of a single lossless snubber inductor, and ZCS turn‐on commutation based on overlapping current can be achieved via the wide range pulse frequency modulation control scheme. The high‐frequency high‐voltage transformer primary side resonant current always becomes continuous operation mode, by electromagnetic loose coupling design of the high‐frequency high‐voltage transformer and the magnetizing inductance of the high‐frequency high‐voltage transformer. As a result, this high‐voltage power converter circuit for the magnetron can achieve a complete zero current soft switching under the condition of broad width gate voltage signals. Furthermore, this high‐voltage DC‐DC power converter circuit can regulate the output power from zero to full over audible frequency range via the two resonant frequency circuit design. Its operating performances are evaluated and discussed on the basis of the power loss analysis simulation and the experimental results from a practical point of view. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 79–87, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20126     

济钢第一炼钢厂降低钢铁料消耗实践

济钢第一炼钢厂通过优化入炉原料结构,改进冶炼工艺,实施少渣炼钢,有效减少了转炉吹损,降低了钢铁料消耗成本,2002年增加炼钢综合经济效益3100多万元。     

Engset multi‐rate state‐dependent loss models with QoS guarantee

We consider a single link loss system of quasi‐random input, described by the Engset multirate loss model (EnMLM). Blocked calls may once reattempt to be connected to the system requiring less bandwidth; then the system is described by the single retry model for finite sources (f‐SRM). The EnMLM and the f‐SRM are extended with the single threshold finite source model (f‐STM), where calls may attempt to be connected to the system with less bandwidth requirements, according to the link occupancy, before blocking occurs. We focus on CBP equalization in the EnMLM, f‐SRM and f‐STM, under the bandwidth reservation (BR) policy. For this analysis, we apply two approximate methods, the Roberts' method and the method of reverse transition rates (RTR), which lead to a recursive CBP calculation. We evaluate the accuracy of the above models under the BR policy by comparing the analytical with simulation CBP results, based on the relative approximation errors (RAE). The results are highly satisfactory because they show that the proposed models (formulas) lead to small RAE. Copyright © 2005 John Wiley & Sons, Ltd.