Corrosion behaviour of low-Si alloyed steels in neutral reducing conditions at 90 °C

Electrochemical investigations on low-Si alloyed steels with Si content ranging from 0.25 to 3.2 wt.% were carried out in a 0.1 M NaCl borate-buffered solution (pH 8.4) in reducing conditions at 90 °C. Silicon as an alloying element was proved to degrade at first the steel ability to passivate. For longer immersion times, protective effects developed more efficiently on the steel containing 3.2 wt.% silicon. Passive layers electrochemically formed in the transpassive domain on the steel containing 3.2% Si were shown to be significantly different from those grown at rest potential.     

Evaluation of Digitally Encoded Layer‐by‐layer Coated Microparticles as Cell Carriers

To obtain more biologically relevant data there is a growing interest in the use of living cells for assaying the biological activity of unknown chemical compounds. Density ‘multiplex’ cell‐based assays, where different cell types are mixed in one well and simultaneously investigated upon exposure to a certain compound are beginning to emerge. To be able to identify the cells they should be attached to microscopic carriers that are encoded. This paper investigates how digitally encoded microparticles can be loaded with cells while keeping the digital code in the microcarriers readable. It turns out that coating the surface of the encoded microcarriers with polyelectrolytes using the layer‐by‐layer (LbL) approach provides the microcarriers with a ‘highly functional’ surface. The polyelectrolyte layer allows the growth of the cells, allows the orientation of the cell loaded microcarriers in a magnetic field, and does not hamper the reading of the code. It has further been shown that the cells growing on the polyelectrolyte layer can become transduced by adenoviral particles hosted by the polyelectrolyte layer. It is concluded that the digitally encoded microparticles are promising materials for use in biomedical and pharmaceutical in‐vitro research where cells are used as tools.     

钻井液振动筛叠层筛网透筛率的研究

从理论上详细论述了钻井液振动筛叠层筛网对固相颗粒分离的影响 ,首次提出用透筛率的概念定量地描述这一影响 ,并进行了实例计算。研究表明 ,当上下层筛网随机叠加时对透筛率的影响有以下几种情况 :(1)当上下层筛网开孔尺寸相除的余数为零 ,任意组合叠层筛网的透筛率分别为某一常数 ;(2 )上层筛网目数一定时 ,下层筛网目数越大 ,则透筛率越小 ;(3)上下层筛网的目数相差越小 ,透筛率越小 ;(4 )任意目数的上下层筛网随机叠加后 ,其透筛率仅在一个小范围内变化 ,因此任一叠层筛网有其固有的透筛率属性。     

Determination of the width of the transition layer between the crystalline and amorphous zones in nylon 1010 by SAXS

The width of the transition layer between the crystalline and amorphous zones in nylon 1010 was determined by SAXS with point collimation and long-slit collimation, respectively. The width of the transition layer, E, was found to be 1.7 nm. The results show that the width of the transition layer is independent of crystallinity.     

单层球面网壳地震反应特征分析

考虑不同矢跨比、荷载、跨度和支座刚度等多种因素的影响,对单层球面网壳在地震作用下的反应进行了较全面的研究,给出了其随各参数变化的规律,得出了在单层球面网壳抗震设计中起控制作用的是水平地震作用而不是竖向地震作用等有益的结论.此外本文还给出了由于阻尼比不同而需对引用现行抗震规范反应谱分析的网壳地震作用进行修正的建议.     

不同灌溉条件下的水稻需水规律及水分生产率分析

稻田需水量包括植株蒸腾、棵间蒸发、田间渗漏3部分。研究表明，水稻在充分供水条件下所形成的蒸腾量中包含了一部分无效蒸腾，无效蒸腾量的减少不会影响作物的生长发育，反而会有不同程度的增产和优质效应。节水灌溉技术的推广产生了明显的经济与社会效益。结合当地实际情况采用3种常见的灌溉方式探讨了不同灌溉方式下水稻的需水规律、灌概定额和生产率的差异，为水稻节水高效栽培提供理论与技术依据。     

反向凝固法生产H90-钢-H90复合带

研究H90-钢-H90反向凝固复合过程中复合层厚度的变化规律以及复合带的组织和性能，探讨界面结合机理。结果表明：随着浸渍时间的增加，复合层的厚度变化经历了凝固生长、平衡相持和回熔3个阶段，钢带的预热温度越低，获得的最大复合层厚度越厚；H90复合层的组织为等轴晶粒，复合界面处Cu和Fe发生了扩散，而Zn未发生明显扩散，扩散层较薄，约为4μm；复合带的界面结合牢固；不同复合层厚度的复合带，其力学性能略有差异，但均达到GB5213——85所规定的F级深冲钢板的力学性能要求。     

柳海矿运输大巷返修工程深部软岩支护设计研究

通过现场调查、室内试验以及理论分析,柳海矿运输大巷支护现状进行分析研究,总结破坏原因。根据现场工程地质条件、岩石特性和破坏特点,确定软岩变形力学机制为高应力膨胀性软岩,并提出采用预留刚隙柔层支护技术进行支护。     

管网保温层热经济寿命的决策方法

利用保温裸露因数的概念来反映保温层保温性能的变化，提出采用统一原则来建立适用于单元系统和复合系统保温层热经济寿命的数学模型，并通过实例证明在热经济寿命终了时更新保温层，可使系统的运行具有最大的经济性。