散射式浊度测量仪

浊度是一项评定水质的重要技术指标。如何提高测量浊度的精度是国内外一直在研究的问题之一。文章介绍了作者在散射式浊度测量仪设计过程中，为提高浊度的测量精度和稳定性所做的工作。在测量仪的部件（光学系统，电路系统等）设计中，采取了许多特殊方法，使浊度测量的各项精度指标都得到了较大的提高。     

锡膏激光扫描三维测量系统光强自适应调节技术

根据锡膏激光扫描三维测量系统在测量PCB电路板时底板和锡膏对激光光强的散射效果不同,设计并研制了一套光强自适应调节光源。该光源以程控电源为基础,分析光条中心提取效果与激光光强的关系,应用小波分解与频带能量比相结合的光强自适应调节算法实现测量系统光强自适应调节功能。进行了相关实验,实验结果表明该光源能够很好地实现锡膏激光扫描三维测量系统的激光光强自适应调节,并能选出最适合测量的激光光强,具有很好的适用性。     

光催化降解废气过程中紫外辐射照度模拟和优化

为在光催化设计中合理布置紫外灯,减少光在传输过程中的损失,概括总结径向辐射模型、多点源叠加近似辐射模型和离散坐标辐射模型等3种经典的紫外辐射物理模型;基于离散坐标辐射模型模拟某公司生产的光催化氧化废气处理装置的紫外辐射照度;通过调整灯管布置距离改变光强分布,并拟合光催化单元和光催化网表面的平均紫外辐射照度随灯管布置距离变化曲线.结果表明,距离参数在55～65 mm时,该光催化反应装置的光能利用率较好;紫外灯的合理布置可有效提高光能利用率.     

Effects of the International Temperature Scale of 1990 (ITS-90) on CIE Documentary Standards for Radiometry,Photometry, and Colorimetry

The differences between ITS-90 and IPTS-68 above 1235 K are described. It is shown that none of the following CIE definitions or recommendations require revision because of the introduction of the ITS-90: International Lighting Vocabulary definitions; CIE Standard Illuminants A, D₆₅, other illuminants; and sources for realizing CIE Illuminants. The effect of the ITS-90 on previously calibrated sources for realizing CIE illuminants is negligibly small.²     

Bayesian network based general correspondence retrieval method for depth sensing with single-shot structured light

This study reinvestigated one of the most fundamental problems in structure light depth sensing field: correspondence retrieval of features between patterns and images. We formulate the global optimum correspondence retrieval by maximizing a conditional probability of correspondence given observed features, which is depicted by a Bayesian network. Different from traditional “code-only” based correspondence retrieval methods, the proposed Bayesian network based method exploits the positional correlations of correspondences of neighboring features, namely, the correspondences of poorly detected features are estimated with the aid of the correspondences of well detected features. The method performs especially well on challenging scenes with rich depth variations, abrupt depth changes, edges, etc. Experiments show that the proposed method increase the correspondence accuracy by about 40% on challenging scenes, compared with traditional “code-only” based correspondence retrieval methods.     

基于FPGA的开关量输入模块设计

在测控系统中,经常需要对各种现场信号进行采集;该模块主要实现对开关量状态信号进行实时监控,记录状态信息,为故障诊断提供依据;在设计中,采用了光耦隔离器件对输入信号进行了隔离和抗干扰处理,使用了FPGA实现了数据实时采集和中断处理,最后经PCI总线与主机进行数据交互;在故障诊断系统中,该信号采集板工作稳定、可靠,能够满足系统的实时性要求。     

Roll‐to‐roll UV embossing process applied for light bar‐based sub‐wavelength gratings for backlight

This study proposes a roll‐to‐roll process‐based sub‐wavelength grating, which is attached on a light bar to turn the side‐lit red/green/blue (620, 520, and 450 nm) incident rays into a uniformly and normally output white light with high illuminance from the light bar's surface. On the basis of the rigorous coupling wave analysis, the relationship between the first‐order transmission/reflection efficiency and the pitch of the gratings with different shapes was analyzed. The optimal design can effectively reduce the coupling length and enhance the white color balance for display applications.     

Thermal diffusivity of fluids in a broad region around the critical point

Dynamic light scattering is a suitable method for the investigation of transport properties such as the thermal diffusivity of optically transparent fluids. The main advantages of the method are its quickness, the fact of the thermodynamic state of equilibrium of the sample (gradients are not required), and the relatively simple evaluation of data without the necessity of calibration. However, an insufficient production of intensity of scattered light may be a limiting effect. For that reason the vicinity of the gas-liquid critical point represents the classical range of application. In this paper, it is shown that by means of an appropriate choice of experimental apparatus, measurements are also feasible in an extended range of states. Broad regions around critical points of three pure fluids (sulfur hexafluoride, SF₆; ethane, C₂H₆; nitrous oxide, N₂O) over temperature ranges ¦T-T _c¦ of 0.02 to 50 K and density ranges (/_c) of 0.2 to 2 were investigated. In this region the thermal diffusivity shows great variations with temperature and density and cannot be described by means of ideal-gas behavior or relations for liquids. The measurements were carried out along the coexistence curve for both phases, along the critical isochore and along some isotherms with TT _c. The measured or calculated density, pressure, and thermal diffusivity data as well as some correlations are presented.