膜结构裁剪膜片展开的二次测地线法

本首先对目前应用较广的膜结构裁剪方法，即裁剪线生成与图形展开的方法进行了比较研究，并在此基础上提出了一种新的裁剪方法——二次测地线法．通过对有理论解算例的分析及对不同形式的膜结构进行裁剪，验证了本方法的正确性、可靠性及广泛适用性．     

Line balancing in a just-in-time production environment: balancing multiple U-lines

The introduction of multiple, independent production lines has helped many firms to increase their production flexibility, provide for redundancy when equipment breaks down, reduce idle time and labor costs, and achieve many other benefits. This paper introduces and formalizes the multiple U-line balancing problem. Optimal solution methodologies are provided for Type I (minimize the number of stations for a given cycle time), Type II (minimize the cycle time for a given number of stations), and cost-minimization line-balancing problems. A branch-and-bound algorithm is also developed for the situation in which equipment requirements are dependent on the line configuration and the task assignment to stations. Computational results indicate that the greatest benefit of exploiting multiple lines occurs for smaller cycle-time problems that require higher output.     

道路与匝道中线自动绘制的算法与实现

道路与立交匝道平面中线的计算机自动绘制是道路路线CAD软件的核心功能之一,在道路工程计算机动态交互式设计、计算机辅助成图方面具有基础性作用.依据道路中线线形的曲率变化特点,推导了道路中线坐标计算的通用数学模型,并根据一个工程实例在通用图形系统AutoCAD环境下实现了道路与匝道中线的自动绘制.     

含钡合金的生产及其对钢液脱氧行为的研究

介绍了含钡合金的生产状况。在MoSi2炉上对钢管钢进行了含钡合金脱氧行为的研究，然后在150tLF／VD精炼设备上进行了使用含钡合金的工业试验。研究中主要选取SiAlBa、SiCaBa、SiAlBaCa、SiAlBaCaSr及用于钙处理的SiCa包芯线，并选用Al和FeSiAl作为对比脱氧剂，分别考察了实验室条件下和实际生产过程中，采用钡系合金对钢液脱氧的全氧含量，脱氧产物的分布、尺寸和形貌，探讨了钡系合金脱氧和对夹杂物的变质作用的机理。     

曼型气柜支柱的安装方法

通过对曼型气柜关键部位之一的基柱的安装和找正过程的分析，表明基柱安装前对基础进行预处理、安装时测量跟踪找正、安装后定位加固，是保证基柱安装精度的三个重要步骤。     

轧辊轴承的润滑

本文论述轧辊轴承润滑特点、机理，不同润滑脂的选用和在生产实践中的使用效果及如何结合实际情况选择最适宜的润滑产品。     

主电机轴瓦异常情况分析解决办法

介绍南钢中板厂四辊轧机主电机轴瓦一种非典型故障现象，原因分析及解决办法，提出了对类似问题个人见解。     

市县HFC系统如何选择和使用光端机

对有线电视工程设计中如何选用优质设备、提高网络质量等问题进行探讨     

Extremes of random fields over arbitrary domains with application to concrete rupture stresses

To find the exact probability distribution of the global maximum or minimum of a random field within a bounded domain is a pending problem even for Gaussian fields. Except for very special examples of fields, recourse must be taken to approximate reasoning or asymptotic considerations to be judged with respect to accuracy by simulations. In this paper, the problem is addressed through a functional equation that leads to the definition of a class of distribution functions that depend solely on process or field characteristics and domain quantities that can be calculated explicitly. This distribution function class is studied for Gaussian processes in earlier works by the author and it has been obtained explicitly for Gaussian fields on rectangular domains in the plane. Simulation studies show that rather good predictions are obtained for sufficiently smooth wide band Gaussian processes and fields. In this paper, the distribution function is obtained in general for Gaussian fields over arbitrary bounded domains with piecewise continuous and differentiable boundaries, and as in earlier works the distribution function is tested against empirical distribution functions obtained by simulation of sample functions of a smooth approximately Gaussian field, herein called a broken line Hino field. For completeness this particular field type is defined in appendix a and appendix b. The paper concludes with a statistical application on data for plain concrete tensile strength.     

一个基于优化的有限元模型修正方法

本文提供了一个基于一阶搜索优化的有限元模型修正方法。它只需利用结构模态试验的部分固有频率，就能获得较精确的有限元模型。文中附有某无人机上垂尾有限元模型修正的实例。根据上垂尾前二阶试验的固有频率，采用本文方法，对有限元模型进行了修正。修正后有限元模型的前二阶固有频率与试验值的相对误差在2．35％以内，而第三阶固有频率与试验值的相对误差仅为5．81％。它不仅大大地缩小了用修正前有限元模型算得的固有频率与试验值的相对误差，而且还能较精确地预测无试验结果的高阶固有频率值。