宝钢高炉高煤比的实践与探索

宝钢高炉自1992年喷煤以来，从优化喷吹煤种、控制混合煤成分、改善喷煤设备性能和操作参数、制订原燃料质量标准和重新设计高炉操作制度等方面着手，通过多年的科学探索和生产实践，从1998年6月份起，高炉喷煤比已连续5年多的时间稳定在200kg／t的水平，最高曾达到260kg／t，并且高煤比是在高产能、低燃料消耗下取得的。     

基于重复控制技术的逆变电源研究

将重复控制技术应用于单相全桥逆变电源,构成了一种低成本、高性能的波形控制系统。介绍了该重复控制系统的设计方法,分析了系统的稳定性。实验表明,采用重复控制技术使系统具有良好的稳态特性。     

夹钳式承载架结构及应用介绍

介绍了一种在特大型变压器运输中采用的夹钳车承栽架的基本结构,分析了承栽架应具有的各个自由度,并对夹钳式承栽架的不同方案进行了比较和分析。     

PGG隔震器性能试验与分析

本文根据研制的普通钢丝绳鼓型隔震器(简称PGG隔震器)的静力试验，建立了PGG隔震器水平向和垂直向的非线性刚度模型。经冲击台动力试验和理论计算分析，表明PGG隔震器具有优良的爆炸冲击震动隔震性能。     

电力负荷管理系统的现状及发展

介绍了电力负荷管理系统的基本现状，并对该系统为适应新形势下供电部门的需求而必须完善和加强的功能做了详细的说明。     

集中荷载作用下R.C.双向受弯约束梁斜截面抗剪强度的计算

在13根集中荷载作用下钢筋砼双向受弯约束梁斜截面抗剪试验研究的基础上，采用等效梭形截面法，将双向受弯约束梁转化为单向受弯约束梁，并推出集中荷载作用下钢筋混凝土双向受弯约束梁斜截面抗剪强度的计算方法．     

设计指纹签到系统的思考

介绍了实现指纹签到系统中高级语言Visual Basic对底层二进制数据的读取方法，数据的存放方式。详细讲述了用Visual Basic编程的关键技术和方法。同时给出了指纹签到系统的使用效果和应用前景。     

棉型服装面料服用性能测试分析

通过使用悬垂仪、耐磨仪、撕裂仪、透气仪以及折皱弹性仪对棉及棉型织物的各主要服用性能指标进行测试，采用灰色关联的方法分析织物的悬垂性能、透气性能、折皱弹性性能、撕裂性能、耐磨性能等服用性能与主要影响因素(织物的规格，结构)之间的关联程度，分析最终对纺织品面料外观、舒适性、耐用性和保养性的影响。     

Microforms in Gravel Bed Rivers: Formation, Disintegration, and Effects on Bedload Transport

This research aims to advance current knowledge on cluster formation and evolution by tackling some of the aspects associated with cluster microtopography and the effects of clusters on bedload transport. The specific objectives of the study are (1) to identify the bed shear stress range in which clusters form and disintegrate, (2) to quantitatively describe the spacing characteristics and orientation of clusters with respect to flow characteristics, (3) to quantify the effects clusters have on the mean bedload rate, and (4) to assess the effects of clusters on the pulsating nature of bedload. In order to meet the objectives of this study, two main experimental scenarios, namely, Test Series A and B (20 experiments overall) are considered in a laboratory flume under well-controlled conditions. Series A tests are performed to address objectives (1) and (2) while Series B is designed to meet objectives (3) and (4). Results show that cluster microforms develop in uniform sediment at 1.25 to 2 times the Shields parameter of an individual particle and start disintegrating at about 2.25 times the Shields parameter. It is found that during an unsteady flow event, effects of clusters on bedload transport rate can be classified in three different phases: a sink phase where clusters absorb incoming sediment, a neutral phase where clusters do not affect bedload, and a source phase where clusters release particles. Clusters also increase the magnitude of the fluctuations in bedload transport rate, showing that clusters amplify the unsteady nature of bedload transport. A fourth-order autoregressive, autoregressive integrated moving average model is employed to describe the time series of bedload and provide a predictive formula for predicting bedload at different periods. Finally, a change-point analysis enhanced with a binary segmentation procedure is performed to identify the abrupt changes in the bedload statistic characteristics due to the effects of clusters and detect the different phases in bedload time series using probability theory. The analysis verifies the experimental findings that three phases are detected in the bedload rate time series structure, namely, sink, neutral, and source.     

ТДГ3．15万kVA主变压器经济运行分析

根据电力变压器功率损耗的分析，找到ТДГ3．15万kVA2台主变压器的功率损耗与负荷率β的函数关系，并对该2台主变压器的经济运行进行了探讨，计算出了经济运行点。