热力除氧器运行特性实验研究

在热力除氧器实验装置上，对研制的新型除氧器进行了稳态运行特性和动态运行特性实验，得到了除氧器的各种运行特性曲线。研究结果表明，由于对喷嘴和填料进行改进，建立起有利于除氧的传热传质条件，使所研制的除氧器具有良好的稳态及动态运行特性，除氧效果优良。     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系     

MODELING LIQUID MASS TRANSFER IN HIGEE SEPARATION PROCESS

Correspondence concerning this paper should be addressed to Professor Richard S.H. Mah. Hsien-Hsin Tung is now affiliated with Department of Chemical Engineering, California Institute of Technology

Penetration theory is used to describe the liquid mass transfer in Higee separation process. Within a possible range of effective areas, it is shown that the predicted mass transfer coefficients are in reasonable agreement with the estimated mass transfer coefficients. The estimated coefficients were calculated from the experimental data and the possible effective areas. Hence it is concluded the penetration theory is generally applicable to describe liquid mass transfer in Higee separation process. The comparison also suggests that liquid mixing at the junctions of packing materials may be more complete in Higee process than in traditional process.     

推进波作用下的底泥起动

在介绍推进波作用下底泥起动特点的基础上，将上层水体作为粘性流体，底泥作为粘弹性体，推导了推进波作用下泥床面剪应力的表达式，并根据试验结果，给出了推进波作用下底泥起动时的床面剪应力与底泥流变参数的关系。     

Modeling of the bulk free radical polymerization up to high conversion—three stage polymerization model. II. Number-average molecular weight and apparent initiator efficiency

The equations for predicting the number-average molecular weight are derived on the basis of the three stage polymerization model (TSPM) in this paper. By applying the equations, a plotting approach is proposed to determine the apparent initiator efficiency defined as f[(α_td+1)/2] and the constant of chain transfer to monomer, where f is the initiator efficiency and α_td denotes the fraction of the termination rate constants by disproportionation. Using the approach to plot the experimental data in the literature, it is found that the chain transfer to monomer can be neglected for both methylmethacrylate (MMA) and styrene (St) polymerizations, but it can exert a significant effect on ethylmethacrylate (EMA) polymerization. In addition, the apparent initiator efficiency is found to be independent of reaction temperature and initiator concentration at each stage. The values of f[(α_td+1)/2] at gel effect stage are slightly reduced as compared with that at low conversion stage for MMA and EMA polymerizations. However, it decreases significantly at gel effect stage for St polymerization. Using the equations derived and the apparent initiator efficiencies obtained from TSPM plots, the number-average molecular weights at different conversions can be predicted. Comparisons show that the agreement between predictions and experimental data is satisfactory.     

Semi-batch extraction of anthocyanins from red grape pomace in packed beds: experimental results and process modelling

A semi-batch extraction process of anthocyanins was studied in a packed bed. Methanol was used as solvent and the raw material studied consisted of skins of the tempranillo grape, which was obtained from the pomace from red wine vinification. The results show large diffusional effects due to strong control from the mass transfer. The best results were obtained using a high temperature and a high flow rate. A penetration model is proposed in terms of a bed of spherical particles. The model provides a value for the diffusion coefficient of the solute within the solid matrix. It can be seen that the adjustment of the model is satisfactory and that it is able to predict, to a reasonable extent, the yield of the extraction process.     

填料萃取塔的操作性能及设计计算

系统地介绍了填料抽提塔的两相流动及传质特性，设计计算，对填料塔的设计和操作有一定指导意义。     

Influence of heat transfer on anodic oxidation of aluminium

The influence of convective heat transfer on constant current density anodizing of aluminium in sulfuric acid has been examined in a wall-jet electrode reactor. The uniformity of the anodic film thickness is related to the local electrode temperature distribution, which is dependent on the convection. The higher the local temperature, the greater the local oxide thickness. An increased local temperature enhances local field assisted oxide dissolution at the pore bases, and consequently acts to increase the local current density. At relatively high current densities, local features develop on the electrode surface, accompanied by high initial, local temperature rises. The relevance of such local features, limiting useful oxide growth, is considered further.     

Design and characterisation of a close-concentric annular reactor for kinetic studies at high temperatures

A novel annular reactor for kinetic studies at high temperature and flow conditions has been designed to keep eccentricity tolerances below 10%. In a previous work, we have shown that it is very important to keep such low eccentricity values in order to collect reliable kinetic data from this type of reactors. As proposed in this study, a modified reactor with the use of a spacer could guarantee an annular duct with low levels of eccentricity. Manufacturing tolerances or deformation effects giving rise to eccentricity can be significantly minimised when using this apparatus. The reactor has been both experimentally and theoretically characterised. Carbon monoxide oxidation was used as a model reaction under mass-transfer limited conditions revealing an eccentricity of ∼5%. With such small eccentricity levels, a concentric annular form can be assumed in the reactor analysis. Simple 1D or 2D models can therefore be inexpensively used in the evaluation of the kinetic data. Also, prior to the design of the annular reactor, a numerical investigation was carried out to clarify the effects of eccentricity, physical properties of the carrier gas and the annular aspect ratio on mass-transfer limitations. Contrary to expectations, a considerable increase in the fuel mass-diffusivity by carrier gas substitution did not change the mass-transfer rates for cases when eccentricity and aspect ratios were high.     

由1,4-萘醌催化合成1,4-二烷氧基萘-2,3-二甲腈

研究了以 1 ,4-萘醌为原料 ,通过溴代、氰化和 O-烷基化三步合成 1 ,4-二烷氧基萘 -2 ,3 -二甲腈。在溴代反应中以溴化试剂代替液溴 ;在氰化和 O-烷基化反应中以溴化十二烷基三甲基铵 (DTMAB)和聚乙二醇(PEG)作为相转移催化剂 ,并采用正交设计法考察了相转移催化剂、固体碱、反应温度等因素对反应的影响 ,其中氰化产物收率达 88.7%。