轻合金中电磁搅拌技术的研究与应用现状

介绍了电磁工艺的基础理论和电磁搅拌技术的优点及其发展概况。总结了国内外电磁搅拌技术在轻合金中的研究与应用情况。指出了今后电磁搅拌技术的发展趋势。     

双辊快淬制备镁合金薄带碎片的工艺研究

普通铸造镁合金的力学性能、抗腐蚀性能及室温塑性都较差,至今它的应用仍受到限制。快速凝固能显著细化晶粒,大幅度提高综合性能,为镁合金的广泛应用提供了一种可行途径。本研究利用雾化技术将液流破碎成细小液滴,用双辊熔体旋铸法制备了AZ91镁合金薄带碎片,其微观组织细小,平均显微硬度比铸态的有很大提高。文中介绍了镁合金快速凝固薄带碎片的制备原理及工艺方法,分析了后续热处理对快速凝固薄带碎片微观组织的影响。     

钕含量对Mg-Cu-Nd非晶合金贮氢性能的影响

通过溶体快淬成功制备了（Mg65Cu25）100-xNdx（x=2，5，7，10）非晶／纳米晶贮氢合金，利用透射电镜、x射线衍射仪和差热分析仪研究了合金的微观组织结构及其热性能，采用ARBINBTW-2000型电池测试仪研究了合金的贮氢性能。结果表明：随着钕含量的增高，合金的贮氢量呈现上升趋势。非晶（Mg65Cu25）93Nd7合金具有最好的贮氢动力学性能和贮氢容量，最高贮氢量达到3．O％（质量分数），而纳米晶（Mg65Cu25）98Nd2具有最低的贮氢动力学性能和贮氢容量。研究还表明，随着钕含量的增高，合金的非晶形成能力增强，非晶的这种独特的短程有序结构是提高贮氢性能的主要因素。     

复合合金化对AZ91镁合金铸态组织的影响

利用光学显微镜、扫描电镜和X射线衍射仪研究了0.5?、0.2?、0.2%Sr(质量分数,下同)复合合金化对AZ91合金铸态组织影响。结果表明,0.5?、0.2?、0.2%Sr复合加入可以显著细化合金的铸态组织,0.5?、0.2?、0.2%Sr同时加入,其细化效果优于0.5?和0.2?或0.5?和0.2%Sr的复合加入,并且在组织中出现针状或杆状的Al4Ce新相。     

Study on the anodic film formation process of AZ91D magnesium alloy

The formation of anodic film of AZ91D magnesium alloy has been investigated by means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, anodic polarization curve, current-time transients and SEM technique. The results show that, under our experimental conditions, the formation of AZ91D anodic film follows the mechanism of 3D nucleation with diffusion controlled growth. With the increase of applied anodizing potential, the nucleation type of anodic film changes from progressive to instantaneous. The results also show that the initially formed anodized film is threadlike and porous, and high potential is essential for the formation of good anodic film with excellent properties.     

镁渣膨胀性机理试验研究

通过镁渣形成过程、组成、粉化、颗粒分析和安定性试验,研究了镁渣产生体积膨胀性和膨胀滞后性的机理,提出了减轻或消除其膨胀性和膨胀滞后性危害的方法和措施,为镁渣在建筑、交通、水利等工程领域中的应用提供理论依据和指导。     

关于生产精制元明粉的探讨

介绍了以山西运城南风自产芒硝为原料生产精制元明粉的几种工艺,以及国内外精制元明粉的市场及生产状况.精制工艺包括化学除杂法、原料优选法、重结晶法.结果表明,精制元明粉的生产过程实质是一个除杂、提纯过程：对于钙离子含量高的原料,可采用化学除杂法;对于氯离子含量高的原料,可采用氯离子富集法、冷冻法或洗涤法;镁离子较难去除,可采用水硝洗涤、冷冻法.     

不同形貌氢氧化镁的化学合成及影响因素

对不同形貌氢氧化镁的化学合成及外部生长环境进行了综述。尤其对影响氢氧化镁结晶性能和形貌起关键作用的因素，如碱性沉淀剂的选择、合成温度的确定、不同镁盐的影响、碱和镁盐的初始浓度及配比、水热处理、反应物的混合方式、晶形控制剂的加入等，进行了详细的阐述。     

Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

Effect of cation exchange on the distribution and movement of cations in soils with variable charge. I. Effect of lime on potassium and magnesium exchange equilibria

The influence of Ca(OH)₂ on K and Mg exchange equilibria in three New Zealand soils was studied. Calcium hydroxide was mixed with each soil to raise the pH to about 6 or 7. For each Ca(OH)₂ treatment, K and Mg exchange isotherms were determined, from which the equilibrium activity ratios were derived. Exchange coefficients and solution activity ratios were calculated according to the Gapon convention.The addition of Ca(OH)₂ produced varying effects in the Gapon exchange coefficient for both K and Mg. The magnitude and direction of change in the exchange coefficient were related to the cation initially dominating the exchange sites, rate of Ca(OH)₂ addition, soil colloids contributing to the CEC and specific interactions of Ca with these soil colloids.Addition of Ca(OH)₂ reduced the equilibrium activity ratio of all soils. Changes in the bonding strength of K and Mg with increasing CEC were suggested as a possible mechanism for this decrease.