区分服务中聚集流行为及其标记算法研究

区分服务是目前在IP网络服务质量控制方面被广泛采用的一种体系结构,它在网络边界对用户数据流聚集进行分类、测量、标记和整型,在网络核心转发,实现PHB,从而达到对不同类型的业务进行区别对待的目的.本文通过对UDP和TCP混合聚集流的行为特性分析,指出将UDP和TCP业务进行分离的必要性.通过对TCP聚集流的仿真实验和分析,阐述了TCP聚集流和单个TCP的行为差异、聚集流中具有不同RTT的TCP流的速率差别,以及聚集流中的流的数目和链路带宽对链路利用率的影响.最后通过对TSW2cm标记算法的仿真实验,分析了该算法在公平性方面的弱点,提出了一种基于TCP流状态信息的聚集流标记算法f-TSW2cm,并对算法进行了对比实验和结果分析.     

多Agent的DDoS源地址追踪方法研究

对数据包标记的各种技术进行了深入研究,分析它们存在的问题,基于上述的研究,提出一种多Agent的追踪方法,以解决传统方法存在的重构需要大量数据包,追踪鲁棒性和实时性差等问题.该方法采用并行分布式的结构,将整个追踪区域分成若干自治网络,在各自治网络内独立采用动态的标记概率等算法,同时设立追踪Agent进行自治区内的追踪,最终将由追踪管理器收集各追踪Agent的部分攻击路径并重构出整个攻击路径.理论分析表明,该方法降低了计算量和误报率,增强了追踪的实时性和准确性等.     

Laser marking system for light guide panel using design of experiment and web-based prototyping

A light guide panel (LGP) is an element of the liquid crystal display (LCD) back light unit (BLU), which is used for display devices. In this study, the laser marking process is applied to the fabrication of light guide panels as the new fabrication process. In order to obtain a light guide panel which has high luminance and uniformity, four principal parameters such as power, scanning speed, ratio of line gap, and number of line were selected. A web-based design tool was developed to generate patterns of light guide panel via the network, and the tool may assist the designer to develop various prototype patterns. Topcon-BM7 was used for luminance measurement of each specimen with 100 mm×100 mm area. By Taguchi method, optimized levels of each parameter were found, and luminance of 3523 cd/cm² and uniformity of 92% were achieved using the laser machined BLU.     

微过滤驱动在终端文档安全保护中的应用

在研究WindowsNT内核操作系统的驱动框架的基础上,基于Minifilter过滤驱动技术以及文档标识技术,设计并实现了一个具有文件安全保护能力的终端文档安全保护系统。该系统既实现了对终端文档的透明标识及透明加密安全保护,又具有对文档访问的策略控制,能有效地防止终端重要信息的泄漏。改进了文档标识技术,将文档密钥嵌入文档标识中,文档标识不仅起到标识文档的作用,也起到了简化密钥管理的作用。     

自适应有限元常用标记策略及其在PHG中的并行实现

讨论自适应有限元计算中常用的标记策略的并行实现问题,介绍并行自适应有限元软件平台PHG中实现这些策略的统一函数接口.特别地,针对一类在分布式存储并行计算机上不易实现的策略,如GERS策略和MNS策略,介绍我们所设计的并行算法.     

基于带标记的并发可达标识图的关键路径的求解方法

将AOE 网转换成有色时延Petri网模型,在模型转换过程中同时计算出各位置所对应的事件的最早开始时间,给出了模拟AOE 网的有色时延Petri网模型的带标记的并发可达标识图的构建算法;利用并发可达标识图中的标记序列直接得到关键路径并计算出完成所有活动所需的最短时间。实例与仿真实验结果表明,当AOE网中平均存在3个以上的并发活动时,所提方法执行效率优于传统的求解关键路径的算法,并发活动越多,所提算法效率越高。     

中国传统标识图形审美意象

"意象"是中国传统美学的一个十分重要的范畴,意象美贯穿了中国传统美学的始终,是中国文化不可或缺的重要组成部分,也是人类文化的共同财富。中国传统标识图形可谓源远流长,从原始的图腾,商周太极八卦,秦汉的篆刻印章,明清的吉祥符号等等,无不体现出意象之美。这种独特的宇宙观与生命情调在艺术设计的美学领域中具有极高的借鉴、赏析价值,主要表现在:一、天地之道;二、吉祥之意;三、完美之象;四、灵空之势。现代标志设计在探寻中国传统文化和审美意识精髓的同时,也要充分认识来自现代西方的各种设计思潮,兼收并蓄,融会贯通,寻找传统与现代的契合点,让现代标志设计既具有民族个性,又具有时代感。     

VB程序设计考核自动评阅系统中若干问题的研究

在大规模的计算机应用能力考核中,必须要实现自动阅卷,对于Visual Basic基础程序设计考核,提出了一种自动评阅的方法,详细描述了该软件的设计思想、设计目的,并对阅卷过程中影响系统健壮性的因素作了深入分析。     

Casting traceability with direct part marking using reconfigurable pin-type tooling based on paraffin–graphite actuators

Green sand moulding machines for cast iron foundries are presently unable to uniquely identify individual castings. An insert tool concept is developed and tested via incremental mock-up development. The tool is part of the pattern plate and changes shape between each moulding, thus giving each mould a unique ID by embossing a Data Matrix symbol into the sand. In the process of producing the mould, each casting can be given a unique (DPM), enabling part tracking throughout the casting's life cycle. Sand embossing is achieved with paraffin-actuated reconfigurable pin-type tooling under simulated processing conditions. The marker geometry limitations have been tested using static symbol patterns, both for sand embossing and actual casting marking. The marked castings have successfully been identified with decoding software. The study shows that the function of each element of this technology can be successfully applied within the foundry industry.     

Using parallel line information for vision-based landmark location estimation and an application to automatic helicopter landing

An approach to landmark location estimation by computer vision techniques is proposed. The objective is to derive the position and the orientation of the landmark with respect to the vehicle by a single image. Such information is necessary for automatic vehicle navigation. This approach requires lower hardware cost and simple computation. The vanishing points of the parallel lines on the landmark are used to detect the landmark orientation. The detected vanishing points are used to derive the relative orientation between the landmark and the camera, which is then utilized to compute the landmark orientation with respect to the vehicle. The size of the landmark is used to determine the landmark position. Sets of collinear points are extracted from the landmark and their inter-point distances are computed. The positions of the collinear point sets are evaluated and used to determine the landmark position. Landing site location estimation by using the identification marking H on the helicopter landing site for automatic helicopter landing is presented as an application of the proposed approach. Simulations and experiments have been conducted to prove the feasibility of the proposed approach.