浅谈门式刚架轻型钢结构厂房中抗风柱的设置

通过对抗风柱上下端的节点几种形式进行分析比较,提出建议性的节点连续方式。     

炼铁生产环境负荷分析和预测研究

利用寿命周期评价的思想，计算了炼铁生产过程中的环境负荷，并分析了各因素对环境负荷的影响，运用神经网络对炼铁生产过程环境负荷进行了预测。     

基于DMF捕获系统频率选择性信道下捕获性能的分析

对基于数字匹配滤波器(DMF)捕获系统在频率选择性信道下的捕获性能进行了深入讨论，利用状态转移图推导出单次驻留判决方式时平均捕获时间的表达式，对平均捕获时间与多径分量的关系进行了数字分析。得出的主要结论是：对于多径分量为非衰落信号时，多径分量之间的能量差别越大，系统捕获性能越好，多径分量的能量相等时，系统捕获性能最差，且随着可以分离的多径路数的增加下降；对于多径分量为慢衰落信号时，多径信道的捕获性能好于单径信道(非频率选择性衰落信道)，且多径分量之间的能量差别越大，系统捕获性能越差，当多径分量的能量相等时，捕获性能最好，这与非衰落信道的情形相反。因此在频率选择性衰落信道中，采用分集接收可以改善系统的捕获性能。     

Analysis of the Ductile Strength of Welds Weakened by Notches in Longitudinally Welded Pipes of Large Diameter by the Method of Slip Lines

We study the stressed state of an inhomogeneous welded joint containing an interlayer of a more high-strength material under the action of tensile loads. It is assumed that the contact boundary has a cracklike defect. We deduce analytic dependences of the fracture load on the mechanical inhomogeneity of the joint, thickness of the interlayer, and depth of the defect. The maximum depth of the defect to which the joint is insensitive is established. The proposed theoretical results are innovative and agree with the experimental data obtained for specimens cut out from a pipe of 14KhGS steel.     

就地补偿在动力厂水泵电机上的应用实例

就我公司动力厂给水车间155kW水泵电机无功就地补偿的可行性及经济效益进行了分析和研究，对工厂用电如何节能降耗有一定的参考价值。     

Limit load analysis of strength undermatched welded T-joints under bending

An increasing amount of laser beam welded T‐joints (e.g. skin‐stringer) of aluminium alloys are now in use in advanced fuselage applications designed as ‘integral structures’ for weight and cost savings. It is known that weld joints generally show lower strength (undermatching) than base metal in both laser beam and friction stir welded joints of 6xxx series Al‐alloys. Damage tolerance considerations in terms of the residual strength of such joints require limit load solutions to be used in engineering fitness‐for‐service (FFS) analysis. The paper, therefore, provides an upper bound limit load solution in closed form for welded T‐joints (idealized) with strength undermatching and subject to a bending moment. In addition to the necessary requirements of the upper bound theorem, the kinematically admissible velocity field chosen leads to a stress field, which satisfies the equilibrium equations and some stress boundary conditions in the plastic zone. This is an advantage of the solution and, therefore, it is expected that the upper bound obtained is close to the exact limit load of such joints.     

Reliability Analysis of Single-Degree-of-Freedom Elastoplastic Systems. II: Suboptimal Excitations

A method for constructing an approximation of the critical excitation that drives an elastoplastic system from rest to a target threshold at a specified time instant, referred to as the “suboptimal excitation,” is presented in this paper. It is based on the observations gained from study of the critical excitations in the companion paper. Essentially, for the usual case of interest where the failure time is not small compared to the natural period, the duration of the positive and negative pulses of the critical excitation are roughly equal to half of the natural period. This consideration allows for a simple intuitive approximation of the critical excitation. The amplitudes of the positive and negative pulses are obtained in closed forms using energy balance. Numerical investigations show that the critical excitations are well approximated by the suboptimal excitations.     

试论双点后方交会简便公式

根据双点后方交会的图形特点和已知条件，列出了方程组，推导出了双点后方交会直接计算座标的简便公式，同时求出了精度计算公式，以供测量人员参考     

新型复合弹簧的研究

提出一种金属圆锥弹簧与橡胶圆锥弹簧复合而成的弹簧．分析表明：它可以应用于弹性耦合激励振动筛和座式直线振动筛。     

微波宽频带功率负载的研究

介绍了５００Ｗ宽频带功率负载的设计及实验结果，并将研究成果扩展到１０～１０００Ｗ范围。负载主要技术指标：输入阻抗５０Ω，频带宽度０～１０００ＭＨｚ，电压驻波比≤１．１．表面最高温升△ｔ≤１００℃。