Extraction of halide quaternary salts in an organic solvent/water system: Hydrodynamics and mass transfer

The hydrodynamic characteristics and mass transfers of halide quaternary salts between two immiscible phases in a stirred membrane permeation cell were investigated. The concentration of quaternary salt, temperature, solvent and the four kinds of halide quaternary salts were evaluated to achieve the extractive optimum condition. The diffusivity, overall mass‐transfer coefficients and individual mass‐transfer coefficients were determined and correlated in terms of the conventional Sh‐Re‐Sc relationship. The transfer time of quaternary salts across the membrane and the thickness of the hydrodynamic diffusion boundary layer were determined as well, so as to characterize the extractive phenomenon of quaternary salts between the two phases that is useful in phase‐transfer catalysis.     

Asymmetric alumina membranes electrochemically formed in oxalic acid solution

Alumina membranes were fabricated by anodizing aluminium metal in 0.15 M oxalic acid. The growth kinetics of the porous layer were investigated in the temperature range –1 to 16 °C using linear potential scans up to 70 V. The faradaic efficiencies of metal oxidation and of porous layer formation, determined by applying Faraday's law, were found to be independent of both temperature and electrical charge. SEM analysis of the metal-side and solution-side surfaces revealed different morphologies. After dissolution of the barrier layer in phosphoric acid, the metal-side surface showed circular pores whose size of about 90 nm was found to be uniform and independent of temperature. The pore population was also practically independent of temperature and a value of about 4 × 10¹³ pores m^–2 was determined. On the solution-side surface the presence of a deposit partially occluding the mouths of pores was observed. This coating could be removed by chemical etching in NaOH or thermal treatment at 870 °C, where decomposition of oxalate occurs. This supports the hypothesis that the deposit consists of an aluminium salt containing oxalate anions precipitated from the solution. The results show that it is possible to control the morphological characteristics of the anodic alumina membranes by careful choice of experimental conditions.     

膜法烯烃/烷烃气体分离的研究进展

对烯烃/烷烃气体分离技术的现状进行了总结，阐述了膜法烯烃/烷烃气体分离的研究进展、分离原理及存在的问题等．同时展望了膜技术应用于烯烃/烷烃气体分离的前景及研究方向．     

甲烷氧化偶联中钙钛矿催化膜的研究进展

甲烷氧化偶联对充分利用天然气资源具有非常重要的意义 ,以钙钛矿催化膜为核心的催化技术最有希望实现这一过程的工业化。本文介绍了近几年来人们对钙钛矿催化膜的研究成果 ,指出了这一领域今后的发展重点。     

Studies on chitin 3—effect of coagulants and annealing on the preparation and the properties of chitin membrane

Chitin membrane was prepared by casting a N,N-dimethyl acetamide, N-methyl 2-pyrrolidone and lithium chloride (DMA-NMP-LiCl)solution of chitin and coagulating with several media. The effect of the coagulants on membrane formation was studied. 2-Propanol was found to be more favourable than methanol, ethanol, acetone and mixtures of 2-propanol and water. The membrane obtained in 2-propanol was subjected to annealing. Annealing made the membrane dense and strong. The tensile strength of the membrane annealed at 145°C for 2hr was about twice that of an unannealed membrane. The solute permeability of the annealed membranes was lower than that of the original one. These phenomena could be clearly interpreted in terms of crystallinity.     

燃料电池质子交换膜的研究进展

本文从质子交换膜的发展入手 ,指出全氟磺酸型质子交换膜是目前最适合燃料电池的膜材料 ,并对其结构特点及优缺点进行了重点分析 ,论述了目前质子交换膜的发展趋势     

利用自生气的油气田开发开采工艺技术概况

油气田开发工艺技术中使用的自生气有N2、O2、CO2、ClO2和混合气五大类型，来源于化学反应和微生物的代谢产物。自生N2主要来自亚硝酸盐和铵盐的氧化还原反应。自生O2则来自过硫酸盐和过氧化物的高温分解。白生CO2来自碳酸盐与酸的反应及含氮类有机物的高温分解。自生混合气包括高能气体和生物气，高能气体是火药或炸药爆燃产生的混合气，生物气是微生物代谢产生的混合气。自生气工作液在油气田现场已应用于固井、射孔、解堵、压裂、调剖和三次采油等广阔的领域。本文概述油气田开发开采中利用五大类自生气的19项工艺技术。参43.     

非洲爪蟾卵提取物中200nm膜泡与环形片层及核被膜上核孔复合体形成的关系

将ＬａｍｂｄａＤＮＡ引入活化的非洲爪蟾卵提取物中，在由磷酸肌酸与磷酸肌酸激酶构成的ＡＴＰ再生系统的参与下，在这种非细胞体系中能够围绕由ＬａｍｂｄａＤＮＡ诱导形成的染色质重建核被膜结构，同时在染色质外出现类似核被膜结构的环形片层。在这两种膜结构中核孔复合体的形成都与直径２００ｎｍ左右的单层圆形小膜泡密切相关，这些小膜泡可以附着在染色质表面或独立于染色质之外相互融合成扁平囊状的双层膜片层，双层膜进一步融合形成核孔，与此同时，核孔复合体在核孔上完成装配。     

膜萃取器设计及应用研究进展

简要阐述了膜萃取的特点和基本类型;重点介绍了轴对称、纤维、片状等３种膜器的设计原理、特征以及膜过程设计．总结了膜萃取技术在金属离子分离、旋光化合物的分离、发酵萃取、医药萃取等方面的应用现状和最新进展;展望了膜萃取技术的发展趋势。     

用直接实验设计方法优化PAN/PSF合金膜的制备条件

在大量单因素实验结果的基础上 ,以直接实验设计方法来设计制膜条件和用SAS软件包对所得实验数据进行优化并建立数学模型 ,得到优化的制膜条件。由该条件所制得的PAN/PSF合金膜的纯水通量提高 1 7倍 ,平均孔径扩大了 1 8倍。