Methods of Verifying Continuous Automatic Belt Weighers: State and Prospects

The basic methods of verifying continuous automatic belt weighers are described. A comparative analysis of these methods on the basis of experimental studies is made and ways of implementing the results in industry are recommended.     

Deformation-Strength Relationships in Short-Term Tension of Heat-Resistant Materials

The analysis of 124 curves obtained in short-term tensile tests demonstrate that they can be described by varying strain hardening and softening characteristics. Different stress–strain curves can be produced at invariable yield strength and ultimate strength and interrelated proportional variations of the above characteristics. To determine some specific stress–strain curve, it is necessary to take account of yield strength and ultimate strength as well as strain corresponding to the latter. The relations between yield strength, ultimate strength and hardening and their practically complete absence between these parameters and softening were statistically established.     

低水分抗热震高铝可塑料在加热炉上的应用

用矾土作为主原料,选择适当结合剂和添加剂,引入微粉技术,采用真空炼泥等工艺手段,研制成低水分抗热震高铝可塑料。该制品用作热媒加热炉衬里,显示出良好的耐高温和耐热冲击性能。     

新型壳聚糖/纳米二氧化硅杂化材料的制备与性能

在纳米S iO2颗粒表面引入羟丙基氯活性基团,得到功能化S iO2颗粒,再将羟丙基氯化的S iO2颗粒交联固定在壳聚糖上,制备了一种新型的壳聚糖/纳米S iO2杂化材料(简称杂化材料);通过傅里叶变换红外光谱、透射电镜、扫描电镜方法对杂化材料进行表征,采用热重(TG)分析研究杂化材料的热性能;考察了杂化材料的沉降速率和对金属离子Ca2+和M g2+的吸附能力。电镜分析结果表明,杂化材料微粒为纳米尺度的无机S iO2加强化的微粒,S iO2颗粒分散在材料中,形成均匀的表面;TG分析结果表明,杂化材料的热性能有所提高;沉降实验测得壳聚糖和杂化材料作为吸附剂的沉降时间分别为130.3,68.5s,表明杂化材料的沉降速率比壳聚糖的沉降速率快了近一倍;杂化材料对金属离子Ca2+和M g2+的吸附量分别可达到0.289 3,1.445 6mm ol/g。     

复合材料一体化钻井泵缸套产业化技术研究

介绍了复合材料一体化钻井泵缸套在产业化过程中的若干关键技术。通过对缸套内套材料成分和组织的优化研究,双液分时离心浇注工艺优化研究以及双液离心浇注工装开发,实现了新工艺缸套的产业化。与现行的热镶装双金属缸套工艺相比,采用新技术生产的缸套平均使用寿命超过750h,生产成本下降了20%。     

繁峙县孤山水库帷幕灌浆工程施工

文中叙述了繁峙孤山水库险加固工程帷幕灌浆的施工方案选择、施工过程及工程的质量检查。     

Mathematical modelling and numerical simulation of ordered porosity metal materials formation

Ordered porosity metal materials belong to a relatively new class of porous materials named gasars. This paper presents a mathematical model of the complex physical phenomena in the production of gasars. Analyses for heat transfer, solidification kinetics and gas diffusion were coupled to describe the formation of unique gasar structure. Several criterial functions were introduced to provide significant quantitative information about the relationship between the operating technological parameters and the final structure. The computational outcomes of the numerical simulation were compared with the characteristics of real gasar ingots. The model was applied to determine the boundary conditions that would provide approximately constant physical conditions on the solidification front. The structure sensitiveness of gasars with respect to the different technological parameters is discussed.     

取样式环空找水仪测井方法及效果评价

目前油田相当一部分产液井产液量相对较低,井下含水率高。这些特点给油井找水工作增加了很大难度,必然要求测试仪器具有适用于高含水率、低产液量的特点。取样式环空找水组合测井仪与常规过流式仪器相比,有着独特的优势,测量含水时不受井筒内流体的流速和抽油机冲程波动的影响。仪器含水测量精度可达到±5%以内,极大地提高了含水参数资料录取的准确性,对油田动态监测具有重要意义。     

岩石圈深部温度压力条件下褐煤与水的热模拟研究

在压力高达1—3GPa、温度为400—700℃的条件下，在密闭体系中进行了褐煤加水的模拟实验。分析了实验产物中液态烃的变化规律，并讨论了压力、温度及恒温时间对有机质演化的影响。实验结果表明，热模拟液态产物氯仿沥青“A”的有机碳含量为0．91％-2．55％，2GPa条件下其高峰值后移至700℃，说明高压抑制了液态烃的生成，同时压力升高有利于有机质降解产物的环化、聚合和芳构化。在400—600℃条件下，温度升高或恒温时间增长，OEP和Pr／Ph值均减小；而在700℃的恒温条件下，压力增高，OEP和Pr／Ph值均增大。说明有机质的成熟度与温度和加热时间成正相关，而压力增加抑制了有机质的成熟演化。在高压条件下，芳烃演化的主要趋势是甲基化作用，压力升高有利于甲基化反应和甲基重排。     

天然气井作业屏蔽暂堵技术的研究与应用

在天然气井进行井下作业前，将暂堵剂挤入生产层位附近，以暂时封堵生产层，使地层压力不被释放，井筒内的压井液不污染地层，待施工作业结束后，及时进行解堵，确保天然气井不受伤害或少伤害，从而恢复天然气井的生产能力。针对天然气井大修作业时，经常补充压井液，由于作业时间长，大量压井液进入地层，造成严重污染，导致天然气井恢复生产困难的问题，研制出一种新型气井作业的屏蔽暂堵剂，具有污染小，易解堵等特点，有效解决了大修污染问题，现场应用取得良好效果。