淤浆鼓泡床中固体粒子的悬浮特性

研究了三相鼓泡床中的临界固含率,以空气作气相,水、乙醇-水、丙酮-水、萜松醇-二甲苯作液相,石英砂、煤、雷奈镍作为固相。分析了鼓泡柱的高径比、气体速度、固体粒子的大小和比重、液体的粘度对临界固含率的影响,提出了含有这些参数的无因次数群的关联式,讨论了本文提出的关联式和文献报导的差别。     

Chemical Reaction Engineering and Research and development of gas solid systems

A general procedure is proposed for innovative research and development of gas-solid reactor systems, with a brief explanation of the significance of each step in the procedureBased upon the contacting mode between gas and solid phases, as well as the ways of supplying thermal energy to the reacting regions, various types of gas-solid reactor systems are classified by using tables of so called “matrix” form, for thermal cracking and gasification of heavy oils, gasification of coal, gasification of solid waste, calcination of limestone, clinkering of cement and reduction of iron ore.The importance of fundamental concepts is emphasized for successful research and development by presenting several examples; namely, calcination of limestone, thermal cracking of heavy oils and gasification of solid waste materials.In connection with the direction in which fundamental research should be oriented, four primary ways of thinking are proposed, which can be applied to obtain innovative ideas for further research and development in this field.One example of the author's practical experience was selected to show the role of the fundamental research in the course of large scale development. Finally the author outlines the role of chemical reaction engineering to innovate the novel gas-solid reactor systems which may be inevitable for simultaneous solution of the three big E's; namely, Energy, Environment and Economy.     

CGA560增强助磨剂在水泥粉磨中的应用研究

研究了CGA560增强助磨剂在水泥粉磨中对台时产量和水泥质量的影响。试验结果表明:在磨机状况不改变的条件下,CGA560增强助磨剂的加入可提高磨机产量10%-30%;同时可有效减少过粉磨现象,优化水泥颗粒级配,提高了水泥粉磨细度及比表面积;因而使水泥强度等性能得到了明显改善和提高。     

胶层厚度对拉伸试样应力分布影响的数值分析

运用弹塑性有限元法研究了胶层厚度对承受拉伸载荷的对接接头胶层内应力分布的影响．三维有限元法数值分析的结果表明，随胶层厚度减小，胶层中正应力SZ与剪应力SYZ的分布趋于均匀；而对正应力SY而言，胶层厚度为0．15mm时，其边缘峰值应力最低。     

Settling velocities of particles in bubbly gas-liquid mixtures

The axial dispersion-sedimentation model is commonly used to describe the axial concentrations of solids in three phase bubble columns at low liquid velocities. When the two parameters of this model, the particle settling velocity and the solids axial dispersion coefficient, are uncoupled by the use of various assumptions, physically unrealistic values of these parameters often result. Direct experimental measurements of solids settling rates in bubbly gas-liquid mixtures were carried out. The measured mean settling velocities decreased slightly with gas flow rate and were equal to or slightly less than the single particle free settling velocity in the liquid alone. Solids axial dispersion coefficients were also obtained from the solids settling rate distribution data, and gave values considerably less than the experimental liquid axial dispersion coefficient.     

Effects of apitong (Dipterocarpus spp.) extractives on bond strength development and curing rate of adhesives

Emulsion polymer isocyanate ( ), polyvinyl acetate ( ) and resorcinol-formaldehyde ( ) adhesives were used to produce single lap shear specimens using resinous and non-resinous apitong (Dipterocarpus spp.) timbers. Tests showed that joints made with highly resinous apitong were about 40% weaker than similar joints made with non-resinous apitong. The resinous apitong was treated with different solvents to yield five different extractives which were characterized by infra-red analysis. Apitong extractives were then added to and adhesives and joints made with buna (Fagus crenata), a timber known to be low in extractives and easy to bond. Joints prepared using extractive-containing adhesives were generally weaker than those made with the unmodified adhesives. RF adhesives containing extractives cured more slowly than unmodified . It is thought that the acidic nature of the extractives changes the pH of the system sufficiently to affect the curing mechanism     

纳米稀土复合固体超强酸催化合成乙酸苄酯

采用共沉淀法制备了纳米稀土复合固体超强酸SO4^2-／ZrO2-2％Nd2O3催化剂，电镜分析表明，催化剂颗粒直径在25nm左右，比表面积测定：71．03m^2／g。酸强度-12．70〈Ho〈-11．99。并对合成乙酸苄酯的最佳反应条件进行了研究。研究表明：当苯甲醇与乙酸的物质的量比为1：2，反应时间为5h，反应温度为120℃，催化剂用量为6％苯甲醇的质量时，酯化率可达92．04％。研究发现，该催化剂可重复使用并可活化再生。     

Rheology of cementitious paste with silica fume or limestone

The rheological behaviour of cementitious pastes where cement has increasingly been replaced by densified silica fume (SF), untreated SF or limestone has been studied. The effect of SF on the flow resistance, taken as the area under the flow curve, was found to depend on the dispersing ability of the plasticizer as illustrated by pastes with naphtalene sulphonate-formaldehyde condensate (SNF) and polyether grafted polyacrylate (PA).The gel strengths increased with increasing SF replacement of cement independently of plasticizer type. The cementitious gel strength was, however, depending on the type of SF since pastes with densified SF developed lower gel strengths than pastes with untreated SF. This phenomenon was attributed to agglomerates in the densified SF which remained unbroken by the mixing and measurement sequence.Both flow resistance and gel strength decreased with increasing limestone replacement. Thus, silica fume may have an advantage over limestone filler as stabilizing agent for self-compacting concrete preventing segregation upon standing and reduced form pressure due to a more rapid gel formation.     

Solid state interfacial reactions in electrodeposited Ni/Sn couples

Ni/Sn couples,prepared by sequentially electroplating Ni layers and Sn layers on metallized Si wafers,were employed to study the mierostructures and growth kinetics of Ni-Sn intermediate phases,when the Ni/Sn couples were aged at room temperature or annealed at temperatures from 150 to 225℃for various times.The results show that the NiSn phase and Ni_3Sn_4 phase are formed,respectively,in the aged couples and annealed couples.The Ni_3Sn_4 layer is continuously distributed between the Ni and Sn sides in t...     

有限体积法求解立体角离散误差

为解决采用有限体积法求解辐射传输方程时引起离散误差的问题,从有限体积法立体角内热流密度的求解过程出发,运用泰勒级数推导了近似误差的表达式,并分析影响离散误差的各种因素,包括离散射线数,辐射强度分布,假散射及网格比.根据分析结果,采用辐射强度的连续分布模型,模拟了各种因素对误差的影响.结果表明,辐射强度的分布函数对于有限体积法的离散误差有一定程度影响.当增加网格数及减小网格尺寸比时,可以有效地减小离散误差.假散射与离散误差间呈较强的非线性耦合关系.