A review on mechanisms and recent developments of nanomaterials based carbon fiber reinforced composites for enhanced interface performance

Carbon fiber reinforced composites have attracted lots of attention in many fields. However, on account of the poor infiltration of resin to carbon fiber, the weak interface performance between fiber and resin has been restricting the interface properties of composites. In recent progress, the review attaches more importance to the introduction of the third phase monomer, which mainly uses physical and chemical methods to assemble nanomaterials (such as carbon nanotubes, graphene, etc.) on the carbon fiber surface to modify the interface structure of the carbon fiber reinforced composites, and all of them have been demonstrated in this paper. Furthermore, the effects of introducing nanomaterials on the structure of the fiber/resin interface and the relationship between multi-scale interface structure and properties have been investigated. It can be seen that the design idea of researchers mainly uses one or more theories to improve the interface properties of carbon fiber reinforced composites, such as transition layer, chemical bonding, mechanical interlocking, infiltration, diffusion, and adsorption. In brief, this work provides some novel insights for the preparation of carbon fiber reinforced composites with excellent interlaminar shear strength.     

电镀塑料制品对结构设计及成形工艺的要求

为保证电镀塑料制品的质量,提出了符合电镀要求的塑料制品设计原则,并且指出在注塑成形时,对塑料经过充分干燥,采用较高的注塑温度,较低的注射压力和较慢的注射速度,是使镀层获得良好结合强度的先决条件。     

Quasiconvolutional smoothing of polyhedra

This paper describes a method for rounding edges and corners of arbitrary polyhedra that uses a fast approximation to convolutional filtering. The approximation defines an implicit surface, which is rendered with a specialised ray-tracing algorithm. By varying the radius of the smoothing filter, a wide range of effects can be obtained, from perfect polyhedra to blobby models. Small rounding radii give polyhedra a softer, more natural look, with edges well delineated by shadows and highlights. The rounded surfaces are much easier to specify and compute than those obtained by traditional filleting and surface-blending techniques, and are far more economical in storage.     

基于兴趣和信任评价的P2P语义社区模型

针对大规模网络中P2P信息共享面临的资源定位问题和“搭便车”现象,在考虑节点语义相似度、信任度和活跃强度的基础上,提出一种语义社区构建方法,提高P2P资源组织的结构性和定位准确性。建立基于信任评价的语义社区动态调整机制,以减少或消除“搭便车”的节点。     

金属表面环氧漆漆膜拉伸剪切强度的测定

借鉴国标胶粘剂拉伸剪切强度测定方法测定了阳极、阴极环氧电泳漆与环氧涂料在底材为铝合金及钢材上漆膜的拉伸剪切强度，在铝件及钢铁件表面上阳极电泳漆漆膜的拉伸剪切强度为11．60MPa及17．91MPa，阴极电泳漆漆膜分别为17．60MPa及23．20MPa，喷涂环氧漆膜为7．93MPa 及13．40MPa，并介绍了测定试验中的实际操作经验和技术细节。     

低密度、高强度DG型高变催化剂的研制

本文叙述了一种适合大型氨厂使用的、堆密度低到1.25 kg·L^-1、还原态侧压强度高达350 N·cm^-1以上、本体含硫＜500 ppm(wt)、低温活性好的高温变换催化剂的研制开发过程 还介绍了催化剂制备工艺特点和工业试用效果。     

Effect of display location on control-display stereotype strength for translational and rotational controls with linear displays

Experiments were designed to investigate the effects of control type and display location, relative to the operator, on the strength of control/display stereotypes. The Worringham and Beringer Visual Field principle and an extension of this principle for rotary controls (Hoffmann E.R., and Chan A.H.S. 2013). “The Worringham and Beringer ‘Visual Field’ Principle for Rotary Controls. Ergonomics.” 56 (10): 1620–1624) indicated that, for a number of different control types (rotary and lever) on different planes, there should be no significant effect of the display location relative to the seated operator. Past data were surveyed and stereotype strengths listed. Experiments filled gaps where data are not available. Six different control types and seven display locations were used, as in the Frame of Reference Transformation Tool (FORT) model of Wickens et al. (Wickens, C.D., Keller, J.W., and Small, R.L. (2010). “Left. No, Right! Development of the Frame of Reference Transformation Tool (FORT).” Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting September 2010, 54: 1022–1026). Control/display arrangements with high stereotype strengths were evaluated yielding data for designers of complex control/display arrangements where the control and display are in different planes and for where the operator is moving. It was found possible to predict display/control arrangements with high stereotype strength, based on past data.

Practitioner Summary: Controls and displays in complex arrangements need to have high compatibility. These experiments provide arrangements for six different controls (rotary and translational) and seven different display locations relative to the operator.     

Residual strength prediction of multiple cracked stiffened panels

Prediction of the coalescence of adjacent cracks is critical for residual strength estimation of structures under multiple site damage conditions. A methodology successfully developed for the case of crack link‐up prediction of un‐stiffened plates, is extended for the case of typical cracked stiffened aircraft panels. The proposed link‐up criterion is based on the change in the magnitudes of elastic and plastic strain energies of the stiffened panel, before and after the cracks coalesce. The strain energy magnitudes of interest are calculated using non‐linear elastic–plastic finite‐element analysis. For the application and verification of the method, experimental results from the open literature are used. Residual strength values calculated by the proposed methodology are in good agreement with the experimental results. The present criterion provides superior results when compared to the existing and commonly applied link‐up criteria.