城市现有地下管线探查及数据处理方法探讨

该文根据城市地下管线探查及数据处理方法现状 ,结合管线管理单位需要 ,对地下管线探查及数据处理方法中的有关问题进行了探讨 ,供今后管线探测工作借鉴     

穿透裂纹和表面半椭圆裂纹模型的失效评定曲线比较

针对弹塑性材料裂纹管道的J积分计算建立了等效穿透裂纹和表面半椭圆裂纹2种有限元模型。在等效穿透裂纹模型中应用了1／4节点单元，在表面裂纹模型中采用了线弹簧单元。用这2种模型计算J积分，分别对3个实际含裂纹管段建立了失效评定曲线。比较了2种模型的失效评定曲线和R6通用曲线的差别，指出穿透裂纹模型偏于保守，建议在油气管道断裂的工程评定中采用半椭圆表面裂纹模型。     

From hospital to municipal cogeneration systems: an Italian case study

A mixed integer linear programming model combined with a more traditional design by scenarios is proposed to optimize facilities size and operation mode of a municipal energy system involving significant civil centres and a hospital. Moving from the need of a new heat and power station for the local hospital due to the construction of new pavilions, the opportunity of involving other centres in the neighbourhood in a distributed cogeneration system is analysed, increasing system complexity step by step. Smaller cogeneration units tailored to hospital needs are rewarding ventures with relatively low risks but, in a country whose traditional power generation systems heavily rely on fossil fuels and where energy policy and market conditions can make it profitable to sell surplus power, district heating systems foster the installation of larger cogenerators and lead thereby to higher profits and to better performance as for primary energy savings and greenhouse gases emission reduction. Copyright © 2006 John Wiley & Sons, Ltd.     

风险评估在加氢装置的应用

广州石化加氢（二）B装置采用基于风险的检测（RBI）技术，对装置的静设备与管道使用RBI软件RB—eye进行定量、定性分析以及失效概率、失效后果的评价，评估了装置的风险情况，制定了装景基于风险分析的检验策略。     

长输管道外防护层的选择与应用

文章介绍了目前国内外长输管道外防护技术的特点和防护层应用的现状,分析了常用防腐蚀材料的防腐蚀性能。指出在山区复杂地形条件下,应考虑环境条件和施工条件,并通过技术经济分析对管道外防腐蚀层进行合理选择。     

An investigation of induced voltages to an underground gas pipeline from an overhead transmission line

This paper investigates induced voltage characteristics from an overhead transmission line by applying a method of modeling of induced voltages proposed by the authors. EMTP simulation results obtained by the modeling method agree with analytical results obtained from a well‐known formula. The induced voltages are significantly dependent on the configuration of the overhead line. A horizontal line induces the largest voltage in a gas pipeline, and the voltage induced by a vertical twin‐circuit line is about 20% smaller than that induced by a vertical single‐circuit line. The method is applied to a real pipeline system and the simulation results show reasonable agreement with field test results. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 43–51, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20465     

丙烯腈吸收塔放空管道噪声控制

某石油化工总厂丙烯腈车间的吸收塔在放空负荷增大以后产生了较严重的噪声,对生产环境造成极大污染。为对丙烯腈吸收塔的放空管道实施噪声控制,改善工厂以及周边厂家的生产环境,进行了噪声控制方案设计及消声器设计。项目实施后,噪声绝对值降低了20分贝,噪声幅度降低达24％。     

天然气管道燃压机组的性能试验及见证

结合西气东输管道工程燃气轮机驱动压缩机组设备订货及验收中对性能试验项目的确定、工厂试验及见证过程,介绍了燃压机组性能试验项目所涉及的主要内容、执行标准、需要达到的技术指标,各种性能试验的基本情况,买方参加工厂试验见证中需要重点处理好的问题等。以期为我国其他大型长输天然气管道机组订货及试验见证工作提供借鉴。     

首钢“川气出川”工程用17.5mmX70管线钢的试制

介绍了首钢试制17.5mm规格高强度、高韧性X70管线钢的生产工艺（成分设计、炼钢和轧钢工艺）及产品的力学性能。在华油钢管厂完成制管（管径为1016mm）以及相应的检验后，所有性能指标全部达到“川气出川”管道工程的技术规范要求。     

西气东输工程用X70热轧板卷屈服强度检测值波动大的探讨

对西气东输工程用X70热轧板卷检验过程中出的屈服强度σ0.5波动大的情况进行了分析，认为拉伸试样弯曲是主要原因。这一问题可通过反复压平试样，确保试样的平直度以及适当提高钢的强度的方法加以解决。