OXIDATION OF SULFUR DIOXIDE IN DIFFERENT TYPES OF THREE PHASE REACTORS

Five different types of three-phase reactors are compared with each other by using oxidation of sulfur dioxide on activated carbon. The kinetic measurements were carried out by changing concentrations of sulfur dioxide from 0.04 to 0.17% (volume) and those of oxygen from 2 to 21%. The reaction rate was 0.2 order with respect to sulfur dioxide and 0.5 order with respect to oxygen. The catalytic effectiveness factor and intraparticle diffusivity were evaluated by changing particle sizes of activated carbon from 0.03 to 1.6 mm. Resistances of gas-liquid, liquid-solid mass transfer and intraparticle diffusion were estimated for individual reactors. The optimum reactor was dependent on operating conditions such as gas flow rates, rotating speeds and particle sizes.     

大型常压锥顶贮罐的设计

以工程实例为依据，论述国内以往较少采用的大型梁柱式支承锥顶贮罐的结构，介绍了国内外相关设计标准，给出了贮罐的典型结构－斜椽，横梁和立柱的计算公式，并用Excel电子表格编制了计算书。     

Mass transfer between solid particles and liquid in a three phase fluidized bed

Particle-liquid mass transfer in a co-current three-phase fluidized bed of glass beads, water and air was studied with two measurement techniques. Both techniques measured the weight loss of a few particles coated with benzoic acid in a bed of inert glass beads. The effects of liquid and gas velocities, gas distribution and surface active agents on particle-liquid mass transfer in a three-phase fluidized bed were thus determined. In the absence of surface active agents in the liquid, particle-liquid mass transfer rates in a three-phase fluidized bed were up to 30% higher than in the corresponding liquid fluidized bed. When surface active agents were added to the liquid, the particle-liquid mass transfer rate was increased by up to about 100% in the three-phase fluidized bed, relative to the liquid fluidized bed. The particle-liquid mass transfer coefficient was found to be inversely proportional to the liquid hold-up in the three-phase fluidized bed.     

Flavonoids released by carrot (Daucus carota) seedlings stimulate hyphal development of vesicular-arbuscular mycorrhizal fungi in the presence of optimal CO2 enrichment

Carbon dioxide has been previously identified as a critical volatile factor that stimulates hyphal growth ofGigaspora margarita, a vesiculararbuscular mycorrhizal fungus, and we determined the optimal concentration at 2.0%. The beneficial effect of CO₂ on fungal development is also visible in the presence of stimulatory (quercetin, myricetin) or inhibitory (naringenin) flavonoids. Sterile root exudates from carrot seedlings stimulate the hyphal development ofG. margarita in the presence of optimal CO₂ enrichment. Three flavonols (quercetin, kaempferol, rutin or quercetin 3-rutinoside) and two flavones (apigenin, luteolin) were identified in carrot root exudates by means of HPLC retention time. Flavonols like quercetin and kaempferol are known to have stimulatory effects on hyphal growth ofG. margarita.     

Influence of Zn ion implantation on structures and field emission properties of multi-walled carbon nanotube arrays

The structures and field emission properties of multi-walled carbon nanotube arrays implanted with Zn+ by MEVVA ion implanter have been investigated.The results revealed that Zn+implantation induced structural damage and that the top of carbon nanotubes with multi-layered graphite structure were transformed into carbon nanowires with amorphous structure.Meanwhile,C:Zn solid solution was synthesized after Zn+ implantation.The turn-on field and threshold field were 0.80 and 1.31 V/μm,respectively for original...     

稳定路径的Ad hoc网络QoS路由算法

移动Ad hoc网络中节点移动或能量耗尽会使得建立的QoS路径断裂而需重构路由,造成通信中断,对实时业务造成严重影响,提出了一种基于路径稳定性的QoS路由算法.该算法采用网络探测技术,综合考虑链路和节点稳定性,选择一条最稳定的路径进行通信,并实时监测路径状态变化,有效降低通信中断的概率.仿真表明,该算法有效改善了分组传送成功率、时延抖动等网络性能.     

双向搜索多约束路由启发式计算方法

为提高大型通信网络中搜索满足多约束条件路由的速度,提出一种双向搜索路由的计算方法.首先从源和目的节点同时出发,计算到达各中间节点的可达路径.然后在各可达路径中进行路径的筛选.可达路径是采用邻接矩阵变换方式获得的,筛选路径是根据非线性开销函数,采用启发方式择优选取.当两方向搜索的节点数累计达到n-2后,对接合并两方向到达中间节点的路径,从中再选择最佳路径作为路由输出.通过算例详细介绍了可达路径计算及启发式选优方法.阐述了算法的正确性及特点,分析了最大时间杂性.通过仿真实验评估,不仅更进一步验证了新算法的正确性,而且表明新算法在搜索路由速度上要优于其他算法.     

钛纳米改性聚合物防腐涂料的研究

为保护大庆油田三元复合液中油管,以钛纳米改性聚合物为主要原料,研制了钛纳米改性聚合物重防腐涂料.采用透射电子显微镜(TEM)研究了钛纳米改性聚合物平均粒径.采用正交试验法,确定最佳原料配比.采用扫描电子显微镜(SEM)研究了漆膜腐蚀.采用金相显微镜研究了钛纳米改性聚合物在漆膜中的分布.探讨了油管的腐蚀机理和钛纳米涂料的防护机理.实验结果表明:钛纳米含量为6%时,涂料具有最佳的防腐蚀效果,能很好的保护大庆油田三元复合液中的油管,并具有优异的抗化学药品介质的腐蚀性能.     

CFRP加固钢筋混凝土梁滞后应变计算方法

为了系统研究从零负载状态到满负载状态各个阶段CFRP片材加固梁滞后应变的计算方法,在充分考虑加固梁不同负载状态及受压区混凝土非线性本构关系的基础上,分别建立了不同负载贴片加固梁考虑混凝土抗拉作用时的滞后应变计算公式及不考虑混凝土抗拉作用时的简化计算公式.试验数据和对比分析结果表明:"考虑混凝土抗拉作用"公式的计算结果与试验数据吻合良好,计算误差<8%,明显优于现有文献的计算方法;"不考虑受拉区混凝土抗拉作用"公式的计算结果在混凝土开裂前和试验值相差较大,但对已裂加固梁的计算误差与"考虑混凝土抗拉作用"公式的计算误差接近.为简化计算,对未裂和已裂混凝土梁贴片加固时的滞后应变可分别采用"换算截面"公式和"不考虑混凝土抗拉作用"公式进行计算,两种简化方法的误差均不会超过10%.     

城市污水的层流换热特性理论

为有效利用城市污水热能,以污水源热泵系统中的流动工质——城市污水为研究对象,通过理论分析的方法,对其层流状态下的换热特性进行理论推导和实验验证.结果表明:污水作为热泵的冷热源,有良好的换热特性,推导得出的换热准则关联式h=4.53λ/D,为污水源热泵系统设计提供依据,同时为应用污水余热技术提供理论基础.