人群头发元素分布及某些特征研究

本文介绍用堆中子活化分析法测定人群头发中I、Br、Mg、Mn、Cu、Na、V、Cl、Al、Ca、S等11种元素。研究人发中元素分布特征、相关性特征、性别年令分布特征。方法学中还从法庭科学应用角度介绍同一性识别中差异率和重合几率的双判据方法。     

5%Si高硅奥氏体不锈钢元素偏析及均匀化处理

 高硅奥氏体不锈钢由于高含量硅元素的加入使其具有优异的耐高温腐蚀性能和较低的成本,在制酸行业有着潜在的应用价值。然而,该合金中高含量硅元素的加入会促进凝固过程中溶质再分配,进而造成显著的元素偏析,最终导致合金内部产生枝晶组织和大量的有害相。对铸锭组织进行均匀化处理能够有效消除枝晶与元素偏析,促进析出相回溶和枝晶消融,从而改善材料的热塑性,有效应对热变形开裂问题。因此,采用金相显微镜(OM)、扫描电镜能谱分析(SEM/EDS)、电子探针(EPMA)、JMatPro软件计算等方法,研究了实验室条件下制备的5%Si高硅奥氏体不锈钢铸锭的显微组织和元素分布状态,通过残余偏析指数、扩散动力学计算并结合均匀化处理试验验证,最终确定了5%Si高硅奥氏体不锈钢合理的均匀化处理工艺。结果表明,5%Si高硅奥氏体不锈钢凝固过程中钼元素偏析最为严重,通过残余偏析指数模型计算得到的均匀化动力学方程可用来指导该成分合金的均匀化处理工艺;5%Si高硅奥氏体不锈钢经过1 150 ℃×12 h均匀化处理后,铸锭内枝晶消融,元素偏析基本消除,析出相与铁素体回溶到基体中,合金转变为全奥氏体组织,热塑性得到改善;当加热温度达到1 250 ℃时,合金出现过烧现象,晶界开始熔化。     

Modularized design for cooperative control and plug-and-play operation of networked heterogeneous systems

In this paper, a cooperative control analysis and design method is investigated for heterogeneous dynamical systems that may be of arbitrary relative degree or nonminimum-phase or both. To achieve consensus or cooperative stability, a negative value of input-feedforward passivity index is used to accommodate and analyze such systems, and the magnitude of the index value is also used as the impact coefficient to quantify the impacts of heterogeneous dynamics of these systems on their networked operations. Physical-system-level designs are explicitly carried out to make individual linear and nonlinear systems (which are either feedback linearizable or nonminimum phase of certain form) become passivity-short and to embed one pure integrator into their input–output dynamics. The network-level distributed control can simply be chosen without any knowledge of the heterogeneous dynamics but with only information of an upper bound on their impact coefficients. It is shown, using the impact equivalence principle, that these controls separately designed but implemented together always ensure either local or global consensus and that a global non-trivial consensus emerges if and only if the information network has at least one globally reachable node or is varying but cumulatively connected. The proposed methodology of fully modularized designs unravels complexity of analyzing and designing cyber–physical systems and enables their plug-and-play into networked operations.     

Local artificial boundary conditions for Schrödinger and heat equations by using high-order azimuth derivatives on circular artificial boundary

The aim of the paper is to design high-order artificial boundary conditions for the Schrödinger equation on unbounded domains in parallel with a treatment of the heat equation. We first introduce a circular artificial boundary to divide the unbounded definition domain into a bounded computational domain and an unbounded exterior domain. On the exterior domain, the Laplace transformation in time and Fourier series in space are applied to achieve the relation of special functions. Then the rational functions are used to approximate the relation of the special functions. Applying the inverse Laplace transformation to a series of simple rational function, we finally obtain the corresponding high-order artificial boundary conditions, where a sequence of auxiliary variables are utilized to avoid the high-order derivatives in respect to time and space. Furthermore, the finite difference method is formulated to discretize the reduced initial–boundary value problem with high-order artificial boundary conditions on a bounded computational domain. Numerical experiments are presented to illustrate the performance of our method.     

Reliability-based robust design optimization: A general methodology using genetic algorithm

In this paper, we present an improved general methodology including four stages to design robust and reliable products under uncertainties. First, as the formulation stage, we consider reliability and robustness simultaneously to propose the new formulation of reliability-based robust design optimization (RBRDO) problems. In order to generate reliable and robust Pareto-optimal solutions, the combination of genetic algorithm with reliability assessment loop based on the performance measure approach is applied as the second stage. Next, we develop two criteria to select a solution from obtained Pareto-optimal set to achieve the best possible implementation. Finally, the result verification is performed with Monte Carlo Simulations and also the quality improvement during manufacturing process is considered by identifying and controlling the critical variables. The effectiveness and applicability of this new proposed methodology is demonstrated through a case study.     

Epileptic seizure classification in EEG signals using second-order difference plot of intrinsic mode functions

Epilepsy is a neurological disorder which is characterized by transient and unexpected electrical disturbance of the brain. The electroencephalogram (EEG) is a commonly used signal for detection of epileptic seizures. This paper presents a new method for classification of ictal and seizure-free EEG signals. The proposed method is based on the empirical mode decomposition (EMD) and the second-order difference plot (SODP). The EMD method decomposes an EEG signal into a set of symmetric and band-limited signals termed as intrinsic mode functions (IMFs). The SODP of IMFs provides elliptical structure. The 95% confidence ellipse area measured from the SODP of IMFs has been used as a feature in order to discriminate seizure-free EEG signals from the epileptic seizure EEG signals. The feature space obtained from the ellipse area parameters of two IMFs has been used for classification of ictal and seizure-free EEG signals using the artificial neural network (ANN) classifier. It has been shown that the feature space formed using ellipse area parameters of first and second IMFs has given good classification performance. Experimental results on EEG database available by the University of Bonn, Germany, are included to illustrate the effectiveness of the proposed method.     

空间资源索引与top-k查询研究

以空间资源索引结构R-tree为基础, 考虑人们对空间资源能力指标的要求, 利用道路网络模型进行空间距离的计算, 提出了一种包含能力维度信息的空间资源索引结构和top-k查询算法, 并与传统遍历算法进行对比实验, 验证了查询算法的有效性。     

基于面向服务的泥石流数值模拟通用平台

对当前泥石流模拟系统的单一性缺点进行了研究,提出了面向服务的泥石流数值模拟的通用平台思想。以有限差分模型为基础,采用面向服务的思想,设计了系统 C/S模式的技术方案并完成了整个系统的设计和实现。经过香港滑坡地形图的验证,证明了本通用平台的可行性和有效性。     

多源信息融合的测井曲线分层算法研究

测井数据解释中,针对单一测井曲线无法真实反映地层属性问题,提出以多条测井曲线的滤波因子为权值,融合出一条综合特征曲线,对该特征曲线相继采用层内差异法细分层与模糊聚类校正分层,实现特征曲线的合理分层。实验结果表明:该方法避免了海量数据处理过程,剔除了噪点数据的影响,提高了分层的速度与精度,能够为应用测井资料进行岩性识别、测井相分析、储层划分等研究提供有利的技术支撑。     

影响超声波热量表流量测量单元静态时间差因素的探讨

超声波热量表主要包含流量测量单元和温度测量单元两部分,其中流量测量单元主要由传感器管道、反射片保持架、换能器等零部件组成。流量测量单元的静态时间差很大程度决定了热量表整体性能。我们通过大量的标定实验来验证各个要素对测量单元静态时间差的影响。