Processing and thermal properties of composites based on recycled PET,sisal fibers,and renewable plasticizers

This investigation focuses on the preparation of bio‐based composites from recycled poly (ethylene terephthalate) (PET) and sisal fibers (3 cm, 15 wt %), via thermopressing process. Plasticizers derived from renewable raw materials are used, namely, glycerol, tributyl citrate (TBC) and castor oil (CO), to decrease the melting point of the recycled PET (T_m ∼ 265°C), which is sufficiently high to initiate the thermal decomposition of the lignocellulosic fiber. All used materials are characterized by thermogravimetric analysis and differential scanning calorimetry, and the composites are also characterized via dynamic mechanical thermal analysis. The storage modulus (30°C) and the tan δ peak values of CT [PET/sisal/TBC] indicate that TBC also acts as a compatibilizing agent at the interface fiber/PET, as well as a plasticizer. To compare different processing methods, rheometry/thermopressing and compression molding are used to prepare the recycled PET/sisal/glycerol/CO composites. These two different methods of processing show no significant influence on the thermal properties of these composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40386.     

Synthesis of polyamidoxime chelating ligand from polymer‐grafted corn‐cob cellulose for metal extraction

A conventional free‐radical initiating process was used to prepare graft copolymers from acrylonitrile (AN) with corn‐cob cellulose with ceric ammonium nitrate (CAN) as an initiator. The optimum grafting was achieved with corn‐cob cellulose (anhydroglucose unit, AGU), mineral acid (H₂SO₄), CAN, and AN at concentrations of 0.133, 0.081, 0.0145, and 1.056 mol/L, respectively. Furthermore, the nitrile functional groups of the grafted copolymers were converted to amidoxime ligands with hydroxylamine under basic conditions of pH 11 with 4 h of stirring at 70°C. The purified acrylic polymer‐grafted cellulose and polyamidoxime ligand were characterized by Fourier transform infrared spectroscopy and field emission scanning electron microscopy analysis. The ligand showed an excellent copper binding capacity (4.14 mmol/g) with a faster rate of adsorption (average exchange rate = 7 min), and it showed a good adsorption capacity for other metal ions as well. The metal‐ion adsorption capacities of the ligand were pH‐dependent in the following order: Cu²⁺ > Co²⁺ > Mn²⁺ > Cr³⁺ > Fe³⁺ > Zn²⁺ > Ni²⁺. The metal‐ion removal efficiency was very high; up to 99% was removed from the aqueous media at a low concentration. These new polymeric chelating ligands could be used to remove aforementioned toxic metal ions from industrial wastewater. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40833.     

Improvement in impact strength of modified cardanol‐bonded cellulose thermoplastic resin by adding modified silicones

The impact strength of cellulose diacetate (CDA) bonded with a modified cardanol (3‐pentadecylphenoxy acetic acid: PAA) was greatly improved up to 9 kJ/m² by adding a relatively small amount of modified silicones while suppressing a decrease in bending strength. In our recent research, this thermoplastic resin (PAA‐bonded CDA) exhibited high rigidity, glass transition temperature, and water resistance. However, its impact strength was insufficient for use in durable products. Therefore, silicones modified with polyether, amino, and epoxy groups were investigated as possible ways to improve the impact strength. The results show that adding polyether‐modified silicone (polyether silicone) with moderate polarity relative to PAA‐bonded CDA resulted in shearing deformation greatly enhances its impact strength while maintaining other properties, including glass transition temperature (T_g), water resistance, and thermoplasticity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40366.     

Mechanical and barrier properties of cardboard and 3D packaging coated with microfibrillated cellulose

Microfibrillated cellulose (MFC) is increasingly used with cellulosic substrates and especially with paper materials. Its use with cardboard remains not reported and the study of mechanical and barrier properties of MFC‐coated cardboard has been investigated in this article. The influence of coating process as well as the effect of MFC have been highlighted by comparing different MFC‐coated cardboard samples with PE‐coated cardboard samples. MFC was coated using bar coating process. Their distribution and homogeneity onto cardboard was observed using techniques such as SEM and FE‐SEM. Tests such as oxygen and air permeability, bending stiffness, and compressive strength have been carried out. The coating process used impacts significantly cardboard properties by two opposite ways: on one hand it damages the structure cohesion of cardboard decreasing its compressive strength; on the other hand it increases its bending stiffness by increasing considerably the samples thickness. The addition of MFC counterbalances the negative effects of the coating process: bending stiffness and compressive strength are indeed improved by 30% in machine direction. On the contrary, MFC does not enhance much cardboard barrier properties, although it considerably increases their water absorption. Within a framework of packaging application, MFC will rather have consequent effects on cardboard's properties as blend or as part of the multilayer structure. Other applications have to be considered for its use as top layer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40106.     

Creep and recovery behavior of kenaf/polypropylene nonwoven composites

This article reports an exploratory study on the creep and recovery behavior of kenaf/polypropylene nonwoven composites (KPNCs), serving as a bio‐based substitution for polypropylene (PP) plastics in the automotive industry due to the environmental concern. The creep and recovery behavior of KPNC and solid virgin PP were performed by dynamic mechanical analyzer (DMA) which allowed it to be studied extensively. The linear viscoelastic limit (LVL) was found at 1 MPa. Two popular creep models, the four‐element Burgers (FEB) model and the Findley power law (FPL) model, were used to model the creep behavior in this study. The FEB model was found only appropriate for characterizing short‐term creep behavior. In contrast, the FPL model was satisfactory for predicting the long‐term creep performance. The long‐term creep behavior of KPNC in comparison to virgin PP plastic was predicted using the time‐temperature superposition (TTS) principle. The 1‐year creep strains were estimated to be 0.32% for KPNC and 1.00% for virgin PP at 40°C. A three‐day creep test was conducted to validate the effectiveness of the TTS prediction. KPNC showed a better creep resistance and higher recoverability than the virgin PP, especially in a high‐temperature environment. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40726.     

Cellulose nanofibers prepared from TEMPO‐oxidation of kraft pulp and its flocculation effect on kaolin clay

Cellulose nanofibers were prepared using TEMPO/NaBr/NaClO oxidation of kraft pulp and successive ultrasonic treatment, and the properties were characterized by conductimetric titration, X‐ray diffraction, and atomic force microscopy. The resulting product was then applied as an anionic microparticle to constitute a microparticulate system with cationic polyacrylamide (CPAM), to induce the flocculation of the kaolin clay suspension. The flocculation effect was evaluated by determining the relative turbidity of clay suspension. The results showed that the obtained cellulose nanofibers had cellulose I structure with higher crystallinity than that of the kraft pulp, and their cross‐sectional dimension was in the range of 3–5 nm. They had more negative zeta potential at neutral and alkaline conditions. It was found that the microparticulate system showed high flocculation effect on kaolin clay at a very low level of nanofiber addition, and a high shear level after CPAM addition was helpful for the flocculation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40450.     

神经网络在电力系统无功优化中的应用

神经网络在处理非线性、多变量、多约束的电力系统无功优化问题方面有其特有的优势,但实际应用中仍存在局限性,把神经网络和其他优化算法结合用于此类问题的研究逐年增多.本文详细阐述了神经网络以及神经网络与其他优化算法相结合在电力系统无功优化中的应用以及今后的发展趋势.     

Effect of processing conditions on wood and glass fiber length attrition during twin screw composite compounding

In this study, we compare the effect of twin-screw extrusion processing on the attrition of wood fibers (WFs) with glass fiber. The effects of process variables and screw design on fiber length were investigated by performing a range of dead-stop experiments where the extruder was stopped, opened-up, and compound removed from the screw elements. Fibers, chemically extracted from the polypropylene matrix, were analyzed for length and width using a commercial fiber analyzer. It was found that WF length attrition and composite properties were less affected by screw design and twin-screw processing conditions (feed rate and screw speed) than glass fiber. Length weighted fiber length and X50 length (a measure used in particle size analysis) were equally correlated with process conditions and composite performance for both fiber types. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48551.     

Fabrication of oriented electrospun cellulose nanocrystals–polystyrene composite fibers on a rotating drum

Nitrobenzene (CNC-1), trifluoromethyl benzene (CNC-2) modified and polystyrene-grafted (CNC-g) cellulose nanocrystals in polystyrene (PS)-N,N dimethylformamide (DMF) solutions were electrospun and collected as stretched and aligned fibers on a rotating drum. Scanning electron microscope pictures showed significant alignment in the case of unmodified and nitrobenzene-modified CNC-1/PS nanocomposite fibers once the linear speed of rotor reached to 15 m s⁻¹. Fiber diameter decrease was more strong with rotor speed increase in the case of trifluoromethyl benzene modified (CNC-2) and polystyrene-grafted (CNC-g) cellulose nanocrystals/PS systems. Dynamic mechanical analysis including storage and elastic modulus of electrospun-oriented fibers were performed on surface-modified and polymer-grafted CNC/PS samples. According to α transition peak, the increase in the glass-transition temperature with filler concentration was the highest in polymer-grafted CNC-g/PS composite fibers. It was due to the interpenetration of grafted polymer brushes and free polymer chains in continuous phase and resulted in restrictions of motions of polymer chains in the PS matrix. The elastic moduli of nitrobenzene (CNC-1) and trifluoromethyl benzene (CNC-2)-modified CNC-filled PS composite fibers agreed well with percolation model, which indicates the CNC–CNC interactions and network formation with an increase in concentration. Magnitude of the elastic modulus of polymer grafted CNC-g at 0.33 vol % in PS was significantly higher than the prediction from percolation theory. It was due the immobilized polymer chains around CNC-g particles. However, grafted polymer chains, at higher CNC concentrations acted like stickers among CNC particles and caused CNC agglomerates with entrapped free polystyrene from the matrix, thus caused a decrease in the elastic modulus. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48942.     

荔枝果皮色差a*值与其他品质指标的关联性

褐变是影响荔枝销售的主要因素之一,为掌握荔枝颜色变化与荔枝品质指标的关联关系,以"桂味"为试验材料,采用带孔PE袋进行包装,分别将其贮藏于气调和冷藏2种贮藏保鲜模式30d,研究了荔枝果皮色差a*值与其他品质指标的变化关系,并拟合成线性关系式。研究结果表明:气调模式比冷藏模式有利于抑制荔枝果皮色差a*值变化,荔枝果皮色差a*值分别从35.0降至28.97和20.96;荔枝果皮色差a*值与果皮失水率、褐变指数、花色素苷含量、果实失重率以及感官评定值成线性关系,平均相关系数为0.8609;荔枝果皮色差a*值与其电导率、pH值线性关系不显著,平均相关系数分别只有0.5392和0.4977;冷藏模式下,除感官评定值外,荔枝果皮色差a*值与其他品质指标的线性相关性要高于气调模式,平均相关系数分别为0.9465和0.7752。研究结果对研究以果皮色差预测荔枝贮藏期及货架期具有一定的参考价值。