Acknowledgment to Springfield Hospital Center.

The author takes this opportunity to acknowledge the staff at Springfield Hospital Center, Sykesville, Maryland where the work was conducted for his article entitled "Integration of a Low-Response Token Economy with Other Treatment Modalities" (see record 1977-13437-001). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

一种冲突证据组合方法

针对证据理论的冲突证据融合问题,分析了D-S合成方法的不足,提出了一种新的改进方法,即基于小概率命题似然度最小值的冲突证据组合方法。该方法通过选择信任折扣因子使得命题似然度达到最小,在应用中会比Dempster组合规则和平均策略更为灵活,更符合证据理论在不确定推理方面的本质特性。通过仿真试验表明该算法能有效地排除干扰,得出了符合实际的组合结果,确保了方法的有效性和可靠性。     

All Night Long: The Architectural Jazz of the Texas Rangers

In the mid-1950s, a group of young faculty at the University of Texas School of Architecture in Austin - aka the Texas Rangers - entertained themselves with weekly sessions of a sophisticated, collective drawing game, ‘Dot-the-Dot’, in which there was an emphasis on inventive fluency in hand drawing as well as an innate knowledge of historic European city plans. What happened when Mark Morris , Visiting Associate Professor at Cornell University, decided in a design studio to ask present-day students to revive the game?     

基于蓝墨云平台的《财务管理》课程思政教学设计思考

信息化发展的今天,手机等电子产品在课堂上的应用已经成为一种趋势,《财务管理》采用蓝墨云班课,借助手机等移动平台,采用“线上线下混合式教学”也取得了一定的效果;但是我们在教书的同时更在强调如何在信息化时代,将育人理念贯穿其中。从《财务管理》在使用蓝墨云的基础上,进而基于课程思政的角度,对《财务管理》进行教学设计,从教学内容和教学方法策略上进行设计,以期待培养学生爱岗敬业、团队合作等良好的职业素质。     

Predicting trends in structural and physical properties of a model polymer with embedded natural fibers: Viability of molecular dynamics studies for a bottom up design

The effects of relatively high- and low-shear processing on the macroscopic and microscopic porosities of a standard packaging polymer—linear low density polyethylene (LLDPE) and its composites with pine flour are studied. The macroscopic porosities, represented by deviations of observed density from the theoretical density, primarily drive the trends in mechanical and solvent uptake properties. The microscopic porosities of the system, however, are independent of the processing method and pine flour concentration. Furthermore, by using molecular dynamics (MD), molecules of LLDPE and pine flour were constructed. The material properties of the molecules, specifically microporosity and elastic moduli, were compared to experiment. A semiempirical modeling approach was used to fit the simulated data to the experimental composite moduli. The model of Halpin and Tsai was found to be the most efficacious for this system, and the benefits of the combined MD-semiempirical modeling for bottom up design are discussed. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48189.     

Preparation and analysis of poly(l-lactic acid) composites with oligo(d-lactic acid)-grafted cellulose

α-Cellulose extracted from jute fiber was grafted with oligo( d -lactic acid) (ODLA) via a graft polycondensation reaction in the presence of para-toluene sulfonic acid and potassium persulfate in toluene at 130 °C for 9 h under 380 mmHg. ODLA was synthesized by the ring-opening polymerization of d -lactides in the presence of stannous octoate (0.03 wt % lactide) and d -lactic acid at 140 °C for 10 h. Composites of poly( l -lactic acid) (PLLA) with the ODLA-grafted α-cellulose were prepared by the solution-mixing and film-casting methods. The grafting of ODLA onto α-cellulose was confirmed by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The analysis of the composites was performed with FTIR spectroscopy, SEM, wide-angle X-ray diffraction, and thermogravimetric analysis. The distribution of the grafted α-cellulose in the composites was uniform and showed better compatibility with PLLA through intermolecular hydrogen bonding. Only homocrystalline structures of PLLA were present in the composites, and the thermal stability increased with increasing percentage of grafted α-cellulose. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47424.     

Poly(lactic acid)–thermoplastic starch–cotton composites: Starch-compatibilizing effects and composite biodegradability

Poly(lactic acid) (PLA) is a biodegradable, brittle, and high-cost polymer, which can be applied over structural components and green packaging. In this study, we reinforced PLA with natural cotton (10 wt %) and thermoplastic starch (TPS; 3 wt %) to obtain a biodegradable and lower cost composite. TPS was incorporated in three distinct ways: it was blended, coated, and blended and coated. In this study, we investigated the compatibilization of TPS in the improvement of matrix-reinforcement adhesion and increase in the tensile behavior without a compromise in biodegradation. The samples were investigated with thermal analysis, dynamic mechanical thermal analysis, tensile testing, scanning electron microscopy, confocal laser scanning microscopy, and hydrolytic degradation. The results show that the coupling effect was more pronounced in the PLA_TPS–cotton_TPS (hybrid system with PLA and cotton) hybrid system. This formulation presented a higher glass-transition temperature, thermal stability, storage modulus, wettability, and ductility. The TPS addition improved the adhesion between the matrix and starched cotton fiber and retarded abiotic biodegradation. These properties will allow for green applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47490.     

Poly(lactic acid)/pulp fiber composites: The effect of fiber surface modification and hydrothermal aging on viscoelastic and strength properties

Poly(lactic acid) (PLA)/kraft pulp fiber (30 wt%) composites were prepared with and without a coupling agent (epoxidized linseed oil, ELO, 1.5 wt%) by injection molding. The non-annealed composite samples, along with lean PLA, were exposed to two hydro-thermal conditions: cyclic 50% RH/90% RH at 23 and 50°C, both up to 42 days. The aging effects were observed by size exclusion chromatography, differential scanning calorimetry, dynamic and tensile mechanical analysis, and fracture surface imaging. ELO temporarily accelerated the material's internal transition from viscous to an increasingly elastic response during the aging at 50°C. ELO also slowed down the tensile strength reduction of the composites at 50°C. These observations were explained with the hydrophobic ELO molecules' coupling and plasticizing effects at fiber/matrix interfaces. No effects were observed at 23°C.     

Self-consistent kinetic theory with nonlinear wave-particle resonances

We have developed, based on the oscillating-center transformation, a general theoretical approach for self-consistent plasma dynamics including, explicitly, effects of nonlinear(higherorder) wave-particle resonances. A specific example is then given for low-frequency responses of trapped particles in axisymmetric tokamaks. Possible applications to transport as well as nonlinear wave growth/damping are also briefly discussed.     

Modification of the wood-plastic composite for enhancement of formaldehyde clearance and the 3D printing application

As the formaldehyde is one of the main indoor pollutants, the purpose of this study is to effectively remove indoor formaldehyde pollution by using environmentally friendly 3D printing ornaments. The wood 3D printing filaments cellulose/polylactic acid composite (Cellu/P) was selected as the starting material, and 3-aminopropyltriethoxysilane (APTES) was used for chemical modification to obtain a series of cellulose composite materials with amino groups. The modified composite materials (APTES@Cellu/P) were characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscope, energy dispersive spectroscopy, thermogravimetric analysis, and mechanical tests, and a formaldehyde removal experiment was performed. The feasibility of 3D printing was evaluated, and the process of 3D printing-functionalized customized ornaments was proposed, and then a school emblem was used for modeling, printing, and surface modification. Compared with the commercially traditional activated carbon, 3D printing-customized ornaments of APTES@Cellu/P material has a better formaldehyde removal effect, and can even avoid the secondary pollution that is common to the activated carbon.