Al/NiO复合粒子的制备与表征

以N i(NO3)2.6H2O和CO(NH2)2为主要原料,通过均匀沉淀法,90℃恒温12 h,异相成核,在片状金属铝粉表面包覆一层N i2CO3(OH)2,制备出包覆式复合粒子A l/N i2CO3(OH)2。将复合粒子在马弗炉中400℃恒温灼烧2 h,制备出了A l/N iO复合粒子。通过SEM、XRD及粒度测试等分析方法,对复合粒子的形貌、晶体结构及粒径进行了表征。     

双季戊四醇收率与反应条件依赖关系研究

利用均匀设计法，通过少量实验，使用计算机回归出双季戊四醇收率与反应条件间的依赖关系：Ｙ＝４．１４１８＋０．０８９ｘ＿１－１０．０８ｘ＿２＋８３．０１８ｘ＿３－０．１２９ｘ＿４－２９．６３８ｘ，其表明增加反应温度和降低甲醛与乙醛配比都可以增加双季戊四醇的收率，结果与实验相吻合。用回归方程得到的优化条件进行实验得到的双季戊四醇收率为２５．４％，与预测值很接近。     

模板浸润法制备非极性聚合物纳米管和纳米线

以孔径为200 nm的多孔阳极氧化铝(AAO)为模板,采用聚合物溶液或熔体浸润模板的物理方法,以非极性通用聚合物为原料,首次制备了非极性聚合物纳米管、纳米线及其阵列结构。对纳米管和纳米线的形貌和结构进行了表征,结果表明对非极性聚合物而言,温度是影响一维纳米结构的主要因素,在较低温度下只能制得纳米线;较高温度下才能得到纳米管。还指出AAO膜纳米孔的高表面效应与熔体的作用能是形成聚合物一维纳米结构的主要驱动力。     

五种化合物临界温度和临界压力的测定

The critical properties of five compounds,including propanal,butanal,1-pentanal,2-methel butanal and trimer of ethanal,were determined for the first time by a new capillary quick-flow method. The apparatus was improved with a capillary tube and checked with hexane and 1-heptene as standard reagents. The experimental results proved that the determination of critical properties by quick-flow method with a capillary tube apparatus was successful.     

水性聚氨酯材料配方设计技巧

介绍了优选法的0.618法和分数法,对其进行改进创新和原理证明,并应用于生产涂料配方设计中。     

Mineral nutrition of slash pine in subtropical Australia. II. foliar nutrient response to fertilization

In the previous paper, we reported the stand growth of slash pine (Pinus elliottii) during the first 11.5 years of plantation in response to (1) initial fertilization at plantation establishment with P rates of 11, 22, 45 and 90 kg P ha^–1 which were either banded or broadcast in the presence or absence of basal fertilizers containing 50 kg N ha^–1, 50 kg K ha^–1 and 5 kg Cu ha^–1 and (2) application of additional 40 kg P ha^–1 at age 10 years. Here we present the responses in foliar nutrient concentrations of slash pine in the first 11.5 years to the initial fertilization and the additional P applied at age 10 years.Foliar N and K concentrations in the first 9.6 years of plantation decreased with the initial P rate. Application of the basal fertilizers improved foliar Cu concentration. Foliar Ca and Mg concentrations increased linearly with the initial P rate. The initial fertilization did not affect foliar Mn concentration in the first 9.6 years. Foliar P concentration increased quadratically with the initial P rate, which accounted for 77–86% of the variation in foliar P concentration. Most of the explained variation in foliar nutrient concentrations was attributable to the plantation age except for foliar P concentration. In the case of foliar P concentration, 53% was explained by the initial P rate, 31% by the plantation age and 2% by the positive interaction between the initial P rate and the plantation age. Foliar P concentration of slash pine at age 11.5 years increased quadratically with the initial P rate and linearly with the additional 40 kg P ha^–1 applied at age 10 years, accounting for 81% of the variation in the foliar P concentration. Foliar nutrient analysis indicated that P was the major limiting nutrient affecting the stand growth of slash pine in the first 11.5 years.     

甲醛法测定铵盐含氮量

对甲醛法测定铵盐含氮量进行了研究，提出采用百里酚酞和酚酞混和指示剂进行测定。该法简单、快速、准确，能满足生产实际和样品检验需要。     

Microwave assisted ultrafast synthesis of graphene oxide based magnetic nano composite for environmental remediation

We have successfully synthesized multi-layer graphene oxide and graphene oxide based magnetic nanocomposite (M/GO) by microwave-assisted modified Hummers’ method for removal of toxic lead (Pb²⁺) and cadmium (Cd²⁺) ions from aqueous solution. The X-ray diffraction spectra of synthesized graphene oxide and M/GO confirm increased interlayer spacing along c-axis. Raman spectra revealed the good quality of synthesized GO and M/GO. The wrinkles were seen in the SEM images of synthesized graphene oxide. The presence of conjugated double bond (CC) and carbonyl (CO) were confirmed by using the UV–Vis spectroscopic spectra. Brunauer–Emmett–Teller (BET) analysis showed high (126 m²/g) surface area M/GO composite which accounts for large number of active binding sites for the adsorption of heavy metal ions. The adsorption studies revealed that Pb²⁺ ions were efficiently adsorbed on GO sheets. Interestingly, M/GO showed better adsorption for cadmium ions.     

SEQUENTIAL LOOP CLOSING IDENTIFICATION OF MULTIVARIABLE PROCESSES USING THE BIASED RELAY FEEDBACK METHOD

Each controller in multiloop control systems for multivariable processes can be tuned sequentially with the ultimate information for the paired input and output while former loops have been closed, and hence, single-input single-output autotuning methods can be applied. In this sequential autotuning for multiloop control systems, several iterations are usually required for better control performances. Especially when pairings are undesirable, the autotuning sequences should be repeated with correct pairings, which result in long field experiments. Here, to avoid this drawback, a simple method to identify process models while loops are being sequentially tuned is proposed. The identified models can be used to correct pairings of multiloop control systems and to improve tuning performances without several field iterations. In addition, they can be used to obtain model-based control systems such as decoupling control systems.     

由二氧化碳出发合成有机碳酸酯

对以二氧化碳为原料合成有机碳酸酯的环氧路线、酯交换和直接合成方法作了综合评述 ,认为直接合成是最佳的合成路线。碳酸酯的直接合成可在均相及多相催化体系中进行 ,负载金属、金属甲氧基化合物及碱均可作为催化剂。直接法研究的关键在于高性能催化剂的开发、由二氧化碳对金属 -氧键插入反应导致的催化循环的构筑及耦合反应的应用。