工艺参数对微区沉淀法制备纳米MgAl2O4粉体的影响

采用高分子网络微区沉淀法制备纳米镁铝尖晶石（MgAl2O4）粉体，并采用TGA／DTA、XRD和TEM等分析测试技术对前驱体的热分解和所制得粉体的物相组成、形貌及颗粒尺寸进行表征，结果表明所制得的MgAl2O4粉体颗粒粒径小，结晶良好，成分单一且粒径大小均匀。而实验过程中工艺参数的改变会对生成粉体的粒径和形貌产生一定的影响，进而即研究了各种工艺参数的改变对该方法制备纳米MgAl2O4粉体的影响。     

New inverse method for identification of constitutive parameters

A new inverse method by coupling iSIGHT and ABAQUS was proposed to determine the constitutive parameters of Al2O3sf/LY12 composite deforming at elevated temperature. It combined the merits of the f＇mite element simulation and optimization technique. The direct model was simulated with finite element code ABAQUS. The inverse problem associated with the identification of the constitutive parameters was expressed as a least square optimization problem. The direct simulation and the parameters optimization were implemented in iSIGHT integrated environment. The aim was to match the output of the direct simulation with the experiment data. The capability of the proposed inverse method was demonstrated through the identification of constitutive parameters of Al2O3sf/LY12 composite. The proposed new inverse method is also applicable to other parameters identification which is hardly determined through experiments or direct analytical method.     

模具型腔加工参数的优化问题

首先阐述了在CAD CAM集成环境下编制数控加工工艺的过程以及优化加工参数的必要性 ,接着 ,分析了需要优化的加工参数。文章详细阐述了优化模型的建立和算法设计问题     

人工智能在冷轧带肋钢筋工艺参数优化中的应用

论述了人工智能在冷轧带肋钢筋工艺参数优化中的应用,首先利用神经网络建立起冷轧带肋钢筋工艺参数与产品抗拉强度之间关系的数学模型,然后用遗传算法对工艺参数优化。按优化后的工艺参数在某拉丝加工厂进行了大批量生产试验,产品的合格率达到98%以上,从而为控制冷轧带肋钢筋工艺参数提供了一条行之有效的途径。     

LD7铝合金热变形行为的实验研究

在G1eeble-1500热模拟试验机上对LD7铝合金试样在变形程度为60％，变形温度为360～480℃、变形速率为0．0l～1s^-1的条件下进行等温压缩试验，然后对其进行固溶处理。根据试验结果分析热变形参数对合金流动应力和固溶之后显微组织的影响，可以得到如下结论：LD7铝合金是动态回复型合金，合金的流动应力随温度的升高而降低，随应变速率的升高而升高；合金的晶粒尺寸随温度的升高而增大，随变形程度和变形速率的增大而减小。     

大型钛合金压气机盘超塑性等温锻造模具结构及工艺参数实验研究

通过超塑拉伸和压缩试验，用金属铅进行模拟实验，探讨了大型ＴＣ１１合金压气机盘超塑性等温锻造的工艺参数，模具结构，锻坯形状尺寸及润滑剂的选择、并讨论了其模具材料及加热方式的选择。     

磁性纤维随机混合媒质等效电磁参数的计算

为计及强散射偶极子间的相互作用,引入参量εh和μh,利用广义多重散射理论及MATLAB计算机软件对在2 GHz～18 GHz频率下的体积占空比为8%的铁纤维随机混合媒质等效磁导率的实验值进行曲线的拟合,导出了耦合系数εh和μh,并在此基础上,对体积占空比分别为30%和20%的铁纤维随机混合媒质等效磁导率进行了计算,计算结果与实验吻合良好.     

Evaluation of the superplastic formability of SP-inconel 718 superalloy

The superplastic formability of SP- lnconel 718 superalloy was evaluated using the argon blowing method. Relationships among superplastic forming parameters (forming temperature, argon pressure, and forming time) and specific dome height (dome height/workpiece diameter) were investigated, as were changes in material properties after superplastic forming. Experimental results showed the optimum forming temperature range for SP- lnconel 718 to be between 975 and 995 °C. During the superplastic forming process, 5- phase precipitates formed at grain boundaries and limited the grain growth, which is considered beneficial for superplastic deformation. On the other hand, increasing the forming deformation also increased the formation of cavities, which can be attributed to the existence of niobium- rich inclusions. This degraded the superplasticity of the superalloy. Electrochemical tests showed that the corrosion resistance of SP- lnconel 718 after superplastic forming worsened because of the existence of both S- phase precipitates and niobium- rich inclusions.     

基于人工智能的钛合金热变形工艺参数优化

在深入分析热变形工艺参数对Ti-15-3合金显微组织及成形载荷的影响的基础上,以变形温度、变形程度和变形速率等热变形工艺参数作为设计变量,以显微组织和成形力的最佳综合为目标,建立了该合金热塑性成形工艺参数的多目标优化数学模型。以显微组织参数和成形力的人工神经网络预测模型作为优化算法的知识源,将人工神经网络与修正的遗传算法相结合,对Ti-15-3合金的热塑性成形工艺参数进行优化。结果表明,提出的修正的遗传算法是有效的,采用将其与人工神经网络相结合的方法对钛合金的热塑性成形工艺参数进行优化是可行的。     

共轨喷油器参数优化研究

现代柴油机采用共轨喷油器已经成为其必不可少的环节,对共轨喷油器的工作特性研究具有重要意义。通过对共轨喷油器的主要结构进行数学建模,得出影响喷油器喷油特性和泄漏特性的结构参数。利用AMESim软件对共轨喷油器的工作过程进行仿真分析,得出单个结构参数对喷油率和泄漏量的影响,由此选择合理范围的结构参数进行正交试验,选用综合平衡法对指标进行评价。得出最优结构参数,优化方案在提高喷油器喷油率以及降低泄漏方面有明显的效果。