低碳微合金钢中的晶内铁素体及组织控制

回顾和评述了晶内铁素体的发现、发展及其与组织控制的关系.介绍了晶内铁素体的形核机制和影响晶内铁素体形成的因素,讨论了晶内铁素体的三维形态和长大动力学,并从以上几方面分析了晶内铁素体对低碳微合金钢组织细化的重要作用和影响.     

高压水射流粉碎原盐

高压水射流粉碎技术是近年发展起来的一项新型粉碎技术。文中介绍了水射流粉碎机理和新研制的后混合靶式水射流粉碎装置 ,并通过原盐粉碎实验证明 ,水射流粉碎具有效率高、工艺简单、产品粒度可调等特点 ,是一项具有良好发展前景的粉碎技术。     

复合聚合物微粒乳液的制备与应用

对种子乳液聚合中加料方式、单体亲水性、引发剂等因素对复合微粒聚合物形成的影响作了介绍 ,总结了聚合物微粒形态预测的热力学和动力学方法。同时 ,讨论了复合聚合物微粒设计的原理并评述了其应用情况     

Melting and crystallization behaviour of elastoplastic semicrystalline copolymers: poly(ether ester)

The melting and crystallization behaviour of an elastoplastic semi-crystalline poly(etherester) has been studied by differential scanning calorimetry. The shape of the melting endotherm is strongly dependent on heating rate and annealing time and results from the sum of simultaneous melting and crystallization phenomena. Samples prepared by different techniques, i.e. by solvent evaporation or by melt extrusion, behave very differently owing to specific crystal morphologies. By applying the Hoffman-Weeks plot, the equilibrium melting temperature has been extrapolated. The Avrami treatment allows the calculation of the index n and of the rate constant K from the isothermal kinetic data.     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

纳米氧化铝的制备及应用

介绍了高科技产品纳米氧化铝的 3大制备方法 :固相法、气相法、液相法的优缺点 ,以及纳米氧化铝的应用与发展前景     

纳米Fe/C复合材料的原位合成

在石油渣油中加入二茂铁，通过热缩聚反的位合成纳米级铁粒子均匀分散于炭基体中的新型复合材料，研究了在420℃热缩聚时停时间和二茂铁添加量对Fe/C形成的影响，并用TEM和XRD观测和分析了Fe/C的形态和结构，结果表明，在基体中铁粒子的粒径为25－50nm，在一定条件下，二茂铁添加量的增加和停留时间的延长均使Fe/C产率提高，停留时间对热缩聚反应的影响遵循一级反应动力学，二茂铁的添加能显著提高反应速率常数k值。     

Mechanical and thermal properties of HVOF sprayed Ni based alloys with carbide

The objective of the present study is to develop multi-functioned coating to the components, which are made of copper with electroplated Ni and are widely used for steel making industry. In this paper, we report the mechanical and thermal properties of Ni based superalloys with carbide sprayed by high velocity oxygen fuel (HVOF), and the detailed effects of sprayed material, spraying conditions, and initial powder structure on these properties. It was found that, among commercial Ni self-fluxing alloys (without fusing treatment), coating with a carbon content of 0.58 mass% had the most preferable properties, with a good balance of the hardness, strength, and thermal shock resistance. The thermal shock resistance depended not only on the strength of the coating but also on the volume contraction when tested at high temperatures. For the several developed Ni based superalloys with carbide, Ni20Cr8Mo5Fe–WC and Ni16Cr15Mo3–WC demonstrated the prominent adhesion strength and thermal shock resistance with high Galvanic corrosion resistance through optimized spraying condition. Also, 20 mass% NiCr–Cr₃C₂ coating sprayed by using employed relatively small primary particle succeeded in achieving the multi-superior properties; high adhesion strength, high corrosion resistance and thermal shock resistance.     

硅酸铋晶体的蚀像形貌

本文研究了提拉法生长的硅酸铋晶体(BSO)的蚀像形貌,比较了{100},{110},{211},{111}面族的腐蚀像特征和腐蚀速度,并用周期性键链(PBC)的形貌理论分析了腐蚀形貌。通过蚀像形貌特征便可方便地进行晶体定向,准确地确定各族晶面之间的相对位置和极轴的方向等。     

Recent developments of high-performance NEOMAX magnets

For further improvement in achieving extremely high magnetic properties of Nd- Fe- B sintered magnets, extensive investigation has been done to densify the magnet up to the theoretical value, to increase the volume fraction of the Nd ₂Fe₁₄B matrix phase, and to achieve a high degree of alignment. By controlling chemical composition and the amount of constituent phases,improving particle size distribution, and adopting the isostatic pressing method to get better alignment of fine particles, we have succeeded in obtaining a high-performance magnet having residual flux density (B_r) of 1.495 T (14.95 kG), maximum energy product [(BH)_max] of 431 kj/m³ (54.2 MGOe), and intrinsic coercivity (iH_c) of 845 kA/m (10.62 kOe).