用改进的逐次逼近解法计算二维井间电磁场

提出了一种计算积分方程的新方法——改进的逐次逼近解法 (MSAM) ,并用该方法计算了轴对称二维井间电磁场。与传统的逐次逼近解法 (SAM)相比 ,该方法收敛性强 ,应用范围广 ,可适用于高电导率对比地层。由于不必进行直接的大型矩阵求逆运算 ,因此与积分方程的直接解法 (IE)相比 ,该方法计算速度更快 ,所需内存更少。采用矩阵求逆方法计算了成层介质中的二维 Green函数 ,并对含 Green函数的积分进行了简化 ,从而加快了计算速度。数值计算结果显示 ,在地层电导率对比度达到 2个数量级时 MSAM仍收敛 ,且计算结果与直接求解积分方程的结果一致 ,因此 MSAM是一种有效的计算轴对称二维井间电磁场的方法     

变异函数在进间砂体预测中的应用

应用变异函数探讨了砂体的定量预测问题。通过对北二东密井网试验区不同类型砂体，不同井网密和岩厚度的预测，检验了此方法的精度（为70％左右），在原方法的基础上，通过对预报精度的分析并结合精度地质研究进一步完善了该方法，提出二次建模法并应用于北二东西块聚驱井的砂岩厚度预测中，预测精度可提高5％以上，从而说明应用变异函数研究砂体的定量预测问题具有可借鉴性，可以为今后新井调整厚度的预测及砂体描述提供依据。     

TRANSFER FUNCTION MODEL ORDER AND PARAMETER ESTIMATION

Abstract. A distributed lag model with a rational transfer function is considered. We have demonstrated that the C -table can be used to determine the orders of the rational transfer function and the Padé table can be used to estimate the parameters of an identifiable transfer function. In case the model is not uniquely identified, the C -table reduces possible competing models to only a few for further examination. Padé approximant gives consistent initial values for possibly more efficient iterative procedures to estimate the coefficients of the identified model. Some asymptotic results on the estimation of the C -table and the Padé table are given. A few examples are presented to demonstrate the effectiveness of the method.     

Linear interpolation in a fuzzy information space

An approach to solving a linear interpolation problem in a fuzzy information space is proposed. Two different schemes of interpolation are outlined: a heuristic one, based on the geometrical interpretation of operations, and an optimization one, based on the expansion principle. The results obtained allow performing fuzzy linear prediction. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 2, pp. 55–68, March–April 2006.     

多功能半导体激光医疗仪电源的研制

根据“多功能半导体激光医疗仪”整机的要求,采用同一电源对667nm和808nm半导体激光器实施供电。为避免电源在开、关机时对半导体激光管产生浪涌冲击,电源在设计中采用了适当的逻辑功能。并可保证对667nm激光器供电时,即使打开808nm激光器供电开关,也不对808nm半导体激光器供电,反之亦然。电源设有手动、计算机两种控制方法,及恒定功率、电流两种工作方式。     

Transient Green’s Tensor for a Layered Solid Half-Space With Different Interface Conditions

Pulsed ultrasonic techniques can be and have been used to examine the interface conditions of a bonded structure. To provide a theoretical basis for such testing techniques we model the structure as a layer on top of a half-space, both of different elastic properties, with various interface bonding conditions. The exact dynamic Green’s tensor for such a structure is explicitly derived from the three-dimensional equations of motion. The final solution is a series. Each term of the series corresponds to a successive arrival of a “generalized ray” and each is a definite line integral along a fixed path which can be easily computed numerically. Willis’ method is used in the derivation. A new scheme of automatic generation of the arrivals and ray paths using combinatorial analysis, along with the summation of the corresponding products of reflection coefficients is presented. A FORTRAN code is developed for computation of the Green’s tensor when both the source and the detector are located on the top surface. The Green’s tensor is then used to simulate displacements due to pulsed ultrasonic point sources of known time waveform. Results show that the interface bonding conditions have a great influence on the transient displacements. For example, when the interface bonding conditions vary, some of the first few head waves and regular reflected rays change polarities and amplitudes. This phenomenon can be used to infer the quality of the interface bond of materials in ultrasonic nondestructive evaluation. In addition the results are useful in the study of acoustic microscopy probes, coatings, and geo-exploration.     

新一代智能城域光网络

本提出了一种标准化的光控制平面。阐明了开了用于光传输网的控制平面所遇到的选择与挑战。光控制平面被分解成邻居发现、服务发现、连接控制和拓扑、资源发现等几个基本的过程。不同的网络组织和分割导致了几个不同的自动配置模型：软性持久链路模型、用户接口模型和对等模型。这是构成以IP为中心的光传输网的控制和管理基础。同时也介绍了基于SDH光交换的新一代CIENA公司智能光网络，它具有大容量光交换能力和网络拓扑结构自动发现、端对端电路配置、带宽动态分配等功能及特点，将大大提高数据、电路业务的服务质量，新一代智能光网络是干线和城域网络交换传输最佳的选择。     

动态光散射法研究海藻酸钠凝胶松弛行为

在前文的基础上，用相关函数轮廓分析的方法剖析了运动模型模式的复杂性。通过海藻酸钠水溶液在０．１ｍｏｌ／ＬＣａＣｌ２水溶液透析凝胶化过程中交联网络的松弛时间谱表明它不是单一的峰，有两上特征运动模式，并随透析向更慢的运动模式发展，这很慢的运动模式估计与区域的结构的生成有关。     

单模光纤的传输衰减随温度变化的研究

本文从实验上测量了单模石英光纤在－50～120℃范围内的损耗。随着温度升高，光纤的损耗随之降低，在常温附近达到最小。其后损耗随着温度的继续升高而增加。损耗的变化主要是由于杂质的吸收和微弯损耗。本文对杂质的吸收以及微弯损耗进行了数值模拟，并且从理论上定性地解释了损耗对温度的依赖关系。     

炉壁集束碳氧枪在电炉中的应用

介绍了鄂钢电炉厂70t consteel 电炉使用炉壁集束碳氧枪后对经济指标的改善,以及在生产实践中的冶金效果.