强力输送带接头识别算法

针对现有的强力输送带故障实时检测方法存在故障定位困难的问题,以接头为基准参考点,提出了一种基于图像处理技术的强力输送带接头识别算法。该算法根据接头点的特征,把接头点用一个数值表示出来,并根据这个数值,以一种简单的方式区分出上、下接头点;然后根据接头的特征,并通过修改最长公共子序列算法的匹配方式,对接头进行识别。实际应用表明,该算法精度高、速度快,可有效识别强力输送带的接头,满足了强力输送带故障检测中接头定位的要求。     

Average-case analysis of the Modified Harmonic algorithm

In this paper we analyze the average-case performance of the Modified Harmonic algorithm for on-line bin packing. We first analyze the average-case performance for arbitrary distribution of item sizes over (0,1]. This analysis is based on the following result. Letf ₁ andf ₂ be two linear combinations of random variables {N _i } _i=1 ^k where theN _i 's have a joint multinomial distribution for eachn= _i=1 ^k ,N _i . LetE(f ₁) O andE(f ₂) 0. Then lim_n E(max(_{f 1},f ₂ ))/n = lim _n max(E(f ₁),E(f ₂))/n. We then consider the special case when the item sizes are uniformly distributed over (0,1]. For specific values of the parameters, the Modified Harmonic algorithm turns out to be better than the other two linear-time on-line algorithms—Next Fit and Harmonic—in both the worst case as well as the average case. We also obtain optimal values for the parameters of the algorithm from the average-case standpoint. For these values of the parameters, the average-case performance ratio is less than 1.19. This compares well with the performance ratios 1.333. and 1.2865. of the Next Fit algorithm and the Harmonic algorithm, respectively.     

带式输送机永磁驱动系统自抗扰同步控制策略

针对带式输送机永磁驱动系统采用PID控制器进行控制时电机的控制性能差和采用多电机驱动时电机间转速不同步、稳定性差等问题,提出了带式输送机多永磁电机驱动系统自抗扰同步控制策略。基于自抗扰控制(ADRC)技术设计了2种调速控制策略,并搭建仿真模型进行了对比试验;随后结合模糊PID控制技术对传统偏差耦合控制进行结构改进,并以矿用带式输送机多永磁电机驱动系统为控制对象,开展基于主从、传统偏差耦合和改进型偏差耦合同步控制结构的仿真。结果表明,基于二阶ADRC和改进型偏差耦合控制结构的带式输送机多永磁电机驱动系统同步控制策略具有更好的抗干扰能力、控制精度和同步性,有利于带式输送机平稳高效的安全运行。     

基于电流变化的环状直流配电网故障定位方法

针对现有故障测距方法无法同时对单极接地故障和极间故障进行定位,以及利用电容放电阶段进行故障定位时忽略了多端换流站都会对故障点注入电流等问题,提出一种利用故障线路上的全电流分量对多端柔性直流配电网进行故障定位的方法。通过联立与故障点相邻两网孔的电压方程,从算法上解决了过渡电阻对求解故障位置的影响。在simulink中搭建6端环状模型对所提方法进行仿真,结果验证所提方法可以在发生线路故障时能快速识别故障并进行可靠定位,满足直流配电网的故障测距要求。     

Thermoplastic polyurethane (TPU) modifier to develop bimodal cell structure in polypropylene/TPU microcellular foam in presence of supercritical CO2

Currently, the fabrication of microcell and bimodal cell structures (BCS) in polymer foams by using supercritical fluids has become a hot as well as a challenging research area worldwide. In this work, an environmentally friendly, effective, facile, and CO₂-based foaming technique was presented to fabricate microcellular polypropylene (PP) foams with BCS via blending with thermoplastic polyurethane (TPU). The toughness, thermal properties, rheological properties, and foamability of PP were systematically investigated with gradual incorporation of TPU. Representative sea-island structure was observed in the scanning electron microscopy (SEM) images for the fracture surface of various PP/TPU samples. Rheological measurement results demonstrated that the viscoelasticity of various PP/TPU samples was improved remarkably compared with that of pure PP and pure TPU. The impact strength of various PP/TPU samples possessed the highest value as 12.4 kJ/m² with the TPU content of 15 wt%. After the addition of TPU, an ameliorative cellular morphology was observed in the SEM micrographs of various PP/TPU samples and their volume expansion ratio was enhanced significantly thanks to their improved melt elasticity. Moreover, it is worth noting that BCS appeared in various PP/TPU foams when the TPU content exceeded 5 wt%.     

关于电子皮带秤挂码标定的探讨

在电子皮带秤称量输送物料的传输系统中,当出现对实物标定困难和安装位置不便于链码标定的计量点时,简单、易行的选择就是进行挂码标定。笔者就怎样减少挂码标定的误差,获得较高的标定精确度等,进行了探讨,可供相关专业参考。     

实现铝锭堆垛、称量、打包一体化控制系统

国内大多数铝锭生产企业在铝锭打包过程中。均采用人工作业方式。为此，根据铝锭生产工艺和技术要求以及现代科学生产管理理念。探讨铝锭称量、堆垛、打包一体化控制系统的研究，其主导思想是在原有的铝锭堆垛机控制系统上，实现铝锭自动化流水作业的功能，改变原有的铝锭生产作业方式。     

H-PSMA/PVA/PP复合膜的制备及油-水乳液分离性能

通过两步法对聚丙烯（PP）膜进行了亲水改性:首先,通过在碱性条件下水解苯乙烯-马来酸酐共聚物（PSMA）制备了水解的苯乙烯-马来酸酐共聚物（H-PSMA）;然后,以聚乙烯醇（PVA）为亲水性改性剂,戊二醛（GA）为交联剂,将H-PSMA/PVA/GA复合材料浸涂在PP基底膜上,制备了亲水性水解苯乙烯-马来酸酐共聚物/聚乙烯醇/聚丙烯（H-PSMA/PVA/PP）复合膜。利用傅里叶变换红外光谱（FT-IR）分析表征了H-PSMA和H-PSMA/PVA/GA的结构;通过测试复合膜表面的静态接触角,探究了PVA和GA含量及成膜溶液的质量浓度等对膜表面润湿性能的影响;最后,测试了复合膜的油水分离效率和重复利用率。结果表明:当GA、PVA和H-PSMA的质量比为0.225∶1∶1,成膜溶液的质量浓度为0.03 g/mL时,所制备的H-PSMA/PVA/PP复合物膜对水包油乳液（O/W）表现出优异的分离性能,初次油水分离效率为99.40%,当重复分离10次后,油水乳液的分离效率仍达到98.83%以上。该复合膜的制备工艺具有安全性好、成本低和环境友好的特点。     

2＋2×0.32ST超高强度钢丝帘线在半钢子午线轮胎带束层中的应用

研究2+2×0.32ST钢丝帘线替代2+2×0.35HT钢丝帘线在半钢子午线轮胎带束层中的应用。结果表明:与2+2×0.35HT钢丝帘线相比,2+2×0.32ST钢丝帘线的强度更高、直径更小、耐疲劳性能更好;在轮胎带束层中用2+2×0.32ST钢丝帘线替代2+2×0.35HT钢丝帘线后,工艺性能良好,成品轮胎的充气外缘尺寸变化不大,强度性能、高速性能、耐久性能和耐水压性能均能满足设计和国家标准要求,滚动阻力降低,同时有效减小了轮胎中的钢丝帘线和胶料用量,降低了生产成本。     

多回路冷凝法技术在聚丙烯装置尾气回收中的应用

陕西延长石油集团炼化公司延安石油化工厂,结合其20万t/a聚丙烯装置实际,自主开发出了一种多回路冷凝装置尾气的回收工艺技术,并成功工业化应用于该装置的3路丙烯尾气的冷凝回收系统。近5年的运行结果表明:经多种措施及操作优化后,该3路冷凝丙烯尾气回收系统,不仅实现了长周期连续平稳、安全运行,还可有效回收丙烯、丙烷分别约为2660,140 t/a。