PVA-based activated carbon fibers with lotus root-like axially porous structure

A novel method was developed for the fabrication of activated carbon fiber (ACF) with wet spinning polyvinyl alcohol (PVA) fibers as the precursors. Through a combination of preoxidation, dehydration, carbonization and activation under a certain tension, PVA-based ACFs (PVA-ACFs) with high yields and good mechanical properties were obtained. The surface and cross-section morphologies, pore structures, surface geometries, surface functional groups and crystal structures of the PVA-ACFs were characterized using field emission scanning electron microscopy, low temperature nitrogen adsorption, Fourier transformed infrared spectrophotometry, X-ray photoelectron spectroscopy and X-ray power diffraction. All the PVA-ACF samples prepared had lotus root-like axially meso- and macroporous structures with the domination of micropores. Fractal geometries of PVA-ACFs deduced from nitrogen adsorption isotherms indicates that capillary force dominated in the interactions between nitrogen and the PVA-ACFs. The surface functional groups of the PVA-ACFs depend on the activating agents. Graphitoidal crystal structures were observed for the PVA-ACFs. The small crystal size and short range ordering between the crystallites ensured a high specific surface area of the PVA-ACFs.     

过磷酸钙含氟尾气处理的新方法

对动态泡沫床处理过磷酸钙含氟尾气的有关技术及费用作了说明 ,指出该方法费用高 ;提出一种新方法 ,该方法不加任何化学助剂 ,采用水作吸收剂 ,只需改变动态泡沫床一些设计参数和选用一种特殊的喷头 (喷头周围设计 1个圆锥形死角区 ,使含氟气体不可能进入该区 )避免了硅胶堵塞。该方法已在湖南浦市化工总厂运行 1年多未发现堵塞 ,同时该法投资少、能耗低、排放尾气达标     

Effect of Twin-Plane Reentrant Edge on the Coarsening Behavior of Barium Titanate Grains

When BaTiO₃ ceramics were sintered at relatively low temperatures (≤1250°C), the grains with reentrant edges caused by a (111) double twin grew exclusively. As a result, a microstructure with a bimodal grain-size distribution composed of platelike large grains and fine matrix grains was obtained. In contrast, at the usual sintering temperature between 1250° and 1350°C, grains containing a (111) double twin did not exhibit any growth advantage. In this case, a coarse and uniform microstructure was obtained. When this coarse-grained specimen was further heat-treated at 1365°C, the grains possessing a double twin were observed to grow exclusively again. The results were explained in terms of a coarsening process controlled by two-dimensional nucleation.     

快速高效隔膜压滤机在鹤壁四矿选煤厂的应用

介绍了快速高效隔膜压滤机的主要性能参数和特点 ;分析了压滤机在煤泥水处理系统中的应用情况和运行结果 ;应用快速高效隔膜压滤机对煤泥水处理系统进行改造后获得了较好的经济及社会效益     

无机颜料的表面处理

介绍了无机颜料表面处理的作用及实现途径,并对其作用机理进行了分析,还叙述了表面活性剂的选择和处理方式。     

真空粉末绝热低温贮罐制造的部分工艺方法

在真空粉末绝热低温贮罐的制造过程中、通过吸附器分子筛的活化、夹层真空系统的处理和充装珠光砂等工艺方法的改进,可较大地缩短产品的制造周期并提高产品的质量。     

Aqueous electrochemical intercalation of bromine into graphite fibers

For the first time, graphite fibers have been electrochemically intercalated with Br⁻ that have the same structure and properties as those intercalated from vapor phase Br₂. This was accomplished by intercalating pitch-based Thornel^® K-1100 graphite fibers at low temperature (near 0 °C) and high currents (2 A) for long times (6 h). The mechanism appears to be that Br⁻ is oxidized to aqueous Br₂ which, when sufficient local concentration builds up, intercalates the fiber. This was confirmed by intercalating K-1100 fiber in a saturated aqueous Br₂ solution without passing an electrical current. The applied voltage does apparently lower the activation energy of the reaction as evidenced by the observation that P-120 and P-100 fibers will not intercalate in aqueous Br₂ unless a voltage is applied.     

电解法处理利福霉素SV钠废渣分离液的研究

根据电化学原理，采用电解法，利用铁屑与炭粒作电极，处理利福霉素SV钠药渣分离液，讨论各种因素对分离液污染物作效果的影响，COD去除率可达91．8％左右，脱色率可达95％左右。     

塑料啤酒瓶开发现状

介绍了塑料啤酒瓶的优点,详细介绍了各种以PET为基础的改性啤酒瓶材料,并列举了大量的开发实例。     

我国南方农村生活污水处理技术的研发现状

针对农村生活污水直接排放已经成为影响我国农村水环境质量主要因素之一的现状,从适合我国农村的以村落或居民点为单位进行生活污水分散式处理的思维入手,介绍了我国现今主要的分散式生活污水处理技术的原理、特点、不足及其应用现状;继而综合比较了这些技术的技术经济指标,提出了适合我国农村的分散式生活污水处理技术的设计原则;最后提出发展有较高水力负荷,并具备小规模设备化特征和多种生物处理单元复合的创新技术是我国农村生活污水处理技术发展的主要方向。