折反光学系统最佳红外像面位置的研究

较深入地研究了折反光学系统的红外像面,为确定实际的红外像面提出了一个新方法—计算从可见光边缘无色的弥散圆到红外最佳像面的距离。实践证明,这是确定这类光学系统最佳像面的一个方便、可靠的方法。     

A three-dimensional measurement system for robot applications

This paper presents a 3D noncontacting sensor system designed to measure the position and orientation of a robot end effector. This measurement system includes two parts: a tridimensional object including four spheres placed along the axes of a tetrahedron and a set of three orthogonally pointed cameras. The purpose is to design a measurement system characterized by easy relationships in order to satisfy real-time constraints. The system has been used in two experiments: first, to calibrate a parallel robot and validate the geometrical control performance, then as an exteroceptive sensor in an assembly task. The system computes position and orientation of the tetrahedron in 100 ms time. The position and orientation accuracy are, respectively, 0.6 mm and 0.2 deg in a workspace, being a cube with 0.3 m sides.     

一种新的坡位定量描述方法及其与滑坡发生的关系

滑坡发生与地形因子的关系是区域滑坡静态规律研究的重点,但以往的研究多注重考虑其与反映几何形态的基本地形属性因子(几何形态属性因子)之间的关系,如坡度和坡向等。首先提出一种新的基于子流域内相对位置定量描述坡位(相对位置因子)的方法,并以温州地区瓯江流域1990~2001年发生的滑坡为研究对象,使用证据权法对比滑坡发生与两种不同类型地形因子之间的关系。结果表明,相对位置因子与滑坡发生的相关性大于滑坡危险性评价经常使用的几何形态属性因子;并且滑坡大多发生在定量坡位值较低的区域,这些地区处在下游,遭受流水侵蚀的强度更大、频率更高。     

多站虚拟量测变换均值无源定位算法

在多站无源均值定位算法中,为了解决部分传感器间夹角过大或过小所导致的定位精度下降问题,提出一种基于虚拟量测变换的多传感器管理无源定位算法.首先在全局坐标系下分析了传感器间夹角对误差几何稀释度(GDOP)的影响,进而得到双站获得较好定位精度的夹角约束关系;其次针对不满足该约束关系的传感器组合提出一种虚拟量测变换定位算法,通过空间管理的方法达到对传感器的优化布站,并结合算法的实施步骤对其原理及特点进行了理论分析,尤其对变换前后的交点精度进行了比较.仿真结果表明虚拟量测算法的定位精度要明显优于均值算法,进而说明该算法的有效性及传感器管理在多站无源定位中的重要作用.     

动态优化不等精度经纬仪交会方法

在多台不等精度经纬仪交会测量系统中,为提高数据的可靠性和精度,根据异面交会原理,提出空间定位精度及其误差的模型;提出采用定常异动算子算法和普通加权平均法相结合的处理方法;对该算法进行数学仿真,计算分别使用定常异动算子和普通加权平均法的交会角区间,并在实际任务中加以应用。试验结果表明,采用合理的算法对多台不等精度经纬仪进行交会测量,增加了测量基线数量从而提高了整体数据的稳定性,同时提高了测量精度。     

基于径向基的瓦斯涌出量灰色预测模型

为了进一步预防煤层瓦斯突出,实现准确、快速预测煤矿瓦斯涌出量的大小,首先采用1-AGO对样本数据进行处理,建立灰色(GM)预测模型,再利用径向基(RBF)神经网络对灰色预测模型结果进行预测,以作为其最终的预测值;采用阜新煤矿某工作面瓦斯涌出量的历史数据进行建模,实验结果表明,GM-RBF组合模型在预测精度及训练误差方面均优于单一的GM模型和RBF神经网络预测模型;算法计算简便,减弱了数据的随机性及模型误差,煤矿瓦斯涌出量的预测平均误差减小到1.57%。     

基于自由摆的平板精确控制与激光追踪系统

以TI公司的MSP430F5438单片机为控制核心,结合步进电机和精密电位器WDD35D-4,实现了基于自由摆的平板控制与激光追踪系统。当摆杆摆角为45°～60°时,平板可以承载8枚一元硬币,并在5个摆动周期内维持稳定;当摆杆摆角为30°～60°时,固定在摆杆平板上的激光笔可以在15s内找到并跟踪1.5m远处的靶心。     

Roll‐to‐roll UV embossing process applied for light bar‐based sub‐wavelength gratings for backlight

This study proposes a roll‐to‐roll process‐based sub‐wavelength grating, which is attached on a light bar to turn the side‐lit red/green/blue (620, 520, and 450 nm) incident rays into a uniformly and normally output white light with high illuminance from the light bar's surface. On the basis of the rigorous coupling wave analysis, the relationship between the first‐order transmission/reflection efficiency and the pitch of the gratings with different shapes was analyzed. The optimal design can effectively reduce the coupling length and enhance the white color balance for display applications.     

A novel adaptive cooperative location algorithm for wireless sensor networks

To overcome the disadvantages of the location algorithm based on received signal strength indication(RSSI) in the existing wireless sensor networks(WSNs),a novel adaptive cooperative location algorithm is proposed.To tolerate some minor errors in the information of node position,a reference anchor node is employed.On the other hand,Dixon method is used to remove the outliers of RSSI,the standard deviation threshold of RSSI and the learning model are put forward to reduce the ranging error of RSSI and improve the positioning precision effectively.Simulations are run to evaluate the performance of the algorithm.The results show that the proposed algorithm offers more precise location and better stability and robustness.