Subdivision of work on construction projects

In order to control a project, construction management requires project information. This is obtained through accounting, estimating, cost management and scheduling functions which produce project reports. These reports are best obtained by subdividing the project into small parts. The ways in which each of these functions subdivides a project in order to produce its reports is discussed, together with a means of interrelating this information with a technique known as the work breakdown structure.     

Evaporation and Evolution of Suspended Solution Droplets at Atmospheric and Reduced Pressures

Thermal history and solute precipitation behavior of suspended solution droplets of sodium chloride (NaCl), magnesium sulphate (MgSO₄), and zirconium hydroxychloride (ZrO(OH)Cl) evaporating at atmospheric and reduced pressures are studied. Experimental measurements on the variation of droplet diameter, solution concentration, and temperature during the evaporation period are presented and discussed. The results of solute precipitation behavior in solution droplets observed under an optical microscope are displayed and discussed. Results indicate that reducing the pressure (∼ 33 kPa) results in a change in the solution droplet evaporation rate, but the thermal histories of a particular solution droplet are similar at the atmospheric and reduced pressures. At atmospheric and reduced pressures used in this study, the d² law for solution droplets is valid at early stages of the evaporation and before the solute precipitation initiates. Drying of MgSO₄ and ZrO(OH)Cl solution droplets results in the formation of spherical particles, whereas drying of spherical NaCl solution droplets results in the formation of cubic particles.     

Effects of Contaminants on Toxicity of the Lampricides TFM and Bayer 73 to Three Species of Fish

Waters in the Great Lakes basin contain more than 400 contaminant chemicals that potentially affect fishery resources, commerce, and human inhabitants. We determined in the laboratory the effects of selected contaminants on the toxicity of the widely used lampricides TFM (3-trifluoromethyl-4-nitrophenol) and Bayer 73 (2′,5-dichloro-4′-nitrosalicylanilide) to three species of fish—rainbow trout (Salmo gairdneri), white sucker (Catostomus commersoni), and fathead minnow (Pimephales promelas). The fish were exposed to paired mixtures of lampricides and selected contaminants in standardized, acute static toxicity tests to determine the resulting type of response—less than additive, additive, or greater than additive (synergistic). As expected, the toxicities of combinations of lampricides with organic pesticides, metal, industrial or municipal pollutants, and tannic acid were mostly additive. However, the toxicity of a combination of TFM, Delnav, and malathion was synergistic, and extremely small quantities of each chemical became lethal when mixed. The concentration that produced 50% mortality was 1.64 mg/L for TFM alone but only 0.041 mg/L for TFM with the pesticides. Toxicities of the pesticides in the combination also increased commensurately. The triple combination of chemicals produced extraordinary synergism and effectively demonstrated the hazards that may result if certain chemical combinations occur in the aquatic environment. However, synergism is not the only kind of toxic action that produces hazards to aquatic organisms. All three types of toxic action are of concern because toxic units produced by contaminant chemicals add to the toxic units of applied management chemicals. Since the toxicity of the majority of chemical combinations is simply additive, this cumulative toxic action contributes more total units to aquatic environments than the extreme actions of less than additive and synergism. The toxicity of the lampricide TFM, as well as other management chemicals, is reinforced by the presence of any contaminant that contributes additional units of toxicity. Therefore, all types of cumulative toxic action should be of concern to people and agencies involved with protecting the environment.     

对中、美两国高校高水平运动队管理体制的探讨

通过调查和查阅了大量的资料，对中、美两国的高校高水平运动队的管理体制进行了比较，旨在通过学习和借鉴将我国高校的高水平运动队管理体制不断的完善，提供一定的参考。     

Strategic appraisal of energy models for Mozambique

The needs that an energy supply system must meet are constantly changing, due to technological, social and political reasons. Effective energy planning is a dynamic process that is repeated periodically and adjusts to changing conditions. Energy decision makers and planners are no longer able to rely on inductive decision making since they have to investigate the effect of various decision parameters and possible future changes. To help in this process, models have been developed where estimates of future load growth, candidate power plants, fuels and other key factors can be introduced, from which the planners can evaluate decision parameters and the available alternatives. The paper presents the different methodologies and practices that are used by 11 energy models for energy demand forecasting, supply side management and generation expansion planning, demand side management and integrated resource planning. The paper concludes to the presentation of a strategic appraisal of the examined energy models appropriate for energy planning in Mozambique. Three models are proposed for conducting demand forecasting, generation expansion planning and demand side management. Copyright © 2002 John Wiley & Sons, Ltd.     

建(构)筑物机械拆除方法综述

介绍了几种常用的建(构)筑物机械拆除方法,对其工作原理、特点、应用条件及局限性加以分析和说明。     

Powder Deposition in Three Parallel-Oriented Dies of Different Shapes

Uniformity of bulk density distribution during the die filling process is required to minimize quality problems, such as distortion and cracking, for powder compacts. Understanding the die filling process is necessary in ensuring a uniform powder deposition. The second-generation pressure deposition tester (PDT-II) was used to investigate the deposition process and final pressure distribution of powder filling in toroidal, cylindrical, and E-shaped dies. All tests were conducted using a spray-dried free-flowing granular powder. The results indicated that for toroidal dies: (1) the area around 0° orientation (the leeward end) had the highest pressure values (1186.7 to 2498.0 Pa), with the average pressure values of the remaining area 353.7-648.0 Pa; (2) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; (3) the highest feed shoe speed (500 mm/s) led to the most nonuniform pressure distribution among the three speeds; (4) higher feed shoe speed did not always result in higher final pressure values; and (5) the right die tended to have higher final pressure values (215.0 to 2498.0 Pa) than the center die (95.4 to 2052.5 Pa). For E-shaped dies: (1) the final pressure values of the middle leg (308.9 to 760.7 Pa) were higher than those of the left and the right legs (148.9 to 530.3 Pa); (2) the area along the backside had the highest final pressure value (1054.6 to 1303.8 Pa); (3) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; and (4) neither the center die nor the right die always had higher pressure values than the other one at all locations. Comparison between cylindrical and toroidal dies indicated that: (1) neither of the two die shapes (cylinder and toroid) led to consistently higher or lower final pressure values at all locations and (2) for all three feed shoe speeds, the toroidal die had higher average final pressure values in the 0° orientation.     

关于项目管理中施工进度控制的研究

阐述了项目管理中施工进度控制的地位与作用，分析了影响工程进度的因素，提出项目进度控制需做好的工作，以提高进度控制水平，确保合同工期的实现。