On the specific reactivity of platinum segregated layers on Pt80X20 (111) (X= Ni,Co, Fe) alloys

The influence of alloying of Pt with 20 at.% of Ni, Co and Fe has been studied in the hydrogenation of 1,3 butadiene. Iron induces the more important modifications, with both higher activity and selectivity. The results are discussed in terms of the surface segregation, the local order in surface and the electronic properties measured by photoemission of core levels.     

Effects of α‐form or β‐form nuclei on polymorphic crystalline morphology of poly(butylene adipate)

The effects of α‐form and β‐form nuclei on polymorphic morphology of poly(butylene adipate) (PBA) upon recrystallization from the molten state up to various T_max values were examined by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and polarized light microscopy (PLM). In this study, PBA with complex melting and polymorphism behaviour was used as a model for examining different types and extents of residual nuclei. As the PBA initially containing the sole α‐crystal was brought to a molten state of various T_max, the extents of trace α‐form crystal nuclei varied and were dependent on T_max. Furthermore, it did not matter whether, initially, the PBA contained α‐ or β‐form crystals (or both) because only a single type of α‐nuclei could be left upon treatment to the molten liquid state at T_max. Therefore, only the α‐crystal in PBA had ‘memory capacity’ in the molten liquid state while the β‐crystal did not. This was so because the latter had been completely transformed into the solid state prior to being heated into a liquid. PBA crystallized before α‐nuclei could be packed into α‐crystal, regardless of the crystallization temperature (T_c). For recrystallization from molten PBA without any nuclei, the crystalline polymorphism was correspondingly influenced by T_c. Copyright © 2005 Society of Chemical Industry     

自成像列阵共振腔的分析——Ⅰ.Talbot共振腔

利用自成像效应进行半导体列阵激光器锁相是一种重要的外腔锁相技术,所构成的共振腔可分为Talbot腔和带相位补偿板的Lau腔。我们用Fox-Li方法计算了共振模式。本文给出了Talbot腔的计算结果和分析,表明同相和反相模的损耗随腔长变化存在临界点。     

一种用于强振环境的转速传感器

该文介绍一种简单、可靠、小巧的转速传感器。它的特点是在强振环境下仍具有很高的可靠,可用于坦克底盘、重型工程机械,燃气轮机组等机械作为转速监测。     

Dynamics of Balancing Space and Time in Memory: Tau and Kappa Effects Revisited.

In 3 experiments, the authors studied the organization of spatiotemporal information in memory. Stimuli consisted of configurations of dots, presented sequentially. The stimuli were either proportional, with interdot distances corresponding to interdot durations, or not proportional, with interdol distances not corresponding to interdot durations. After a learning phase, participants reproduced the spatial (Experiment 1), temporal (Experiment 2), or spatial and temporal (Experiment 3) characteristics of the target 60 times in succession. In the nonproportional conditions, effects of variable interdot durations or distances on the reproduction of, respectively, constant distances (tau effect) or durations (kappa effect) were observed, whereas no such effects were observed when variable distances or durations were to be produced. Tau and kappa effects influenced the accuracy but not the variability of responses. The results are discussed in light of the distinction between properties of the stabilized mental image and the process of stabilization. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

土钉支护在深基坑开挖中的应用

深圳某银行办公楼的深基坑支护采用了土钉支护，不但保证了施工质量，而且缩短了工期，减少了投资，以此工程为例介绍了土钉支护的土力学参数计算、结构设计、施工方案、技术措施和取得的显著效果。     

Effect of Stress State on Growth of Interfacial Intermetallic Compounds Between Sn-Ag-Cu Solder and Cu Substrates Coated with Electroless Ni Immersion Au

Excessive intermetallic compound (IMC) growth in solder joints will significantly decrease the reliability of the joints. IMC growth is known to be influenced by numerous factors during the component fabrication process and in service. It is reported that, other than temperature and holding time, stress can also influence the IMC growth behavior. However, no existing method can be used to study the effect of stress state on IMC growth in a controlled manner. This paper presents a novel method to study the effect of stress on interfacial IMC growth between Sn-Ag-Cu solder and a Cu substrate coated with electroless Ni immersion Au (ENIG). A C-ring was used and in-plane bending induced tensile and compressive stresses were applied by tightening the C-ring. Results revealed that in-plane compressive stress led to faster IMC growth as compared with in-plane tensile stress.     

抗生素后效应对制定治疗方案的指导意义

抗生素后效应系指细菌与抗生素短暂接触后在抗生素被清除的情况下细菌生长仍受抑制的现象。本文对在临床应用中高度重视抗生素后效应的意义和方法作了阐述。     

浆砌石衬砌在渠道防渗中的应用及对策

总结了浆砌石应用的历史,介绍了浆砌石的结构特性和施工工艺,从造价方面、防渗效果及施工三方面分析了浆砌石衬砌主要存在的问题,并提出了相应的解决对策,指出浆砌石衬砌在渠道防渗应用中应控制施工质量,从而更好地提高防渗效果。     

The Dud-Alternative Effect in Likelihood Judgment.

The judged likelihood of a focal outcome should generally decrease as the list of alternative possibilities increases. For example, the likelihood that a runner will win a race goes down when 2 new entries are added to the field. However, 6 experiments demonstrate that the presence of implausible alternatives (duds) often increases the judged likelihood of a focal outcome. This dud-alternative effect was detected for judgments involving uncertainty about trivia facts and stochastic events. Nonnumeric likelihood measures and betting measures reliably detected the effect, but numeric likelihood measures did not. Time pressure increased the magnitude of the effect. The results were consistent with a contrast-effect account: The inclusion of duds increases the perceived strength of the evidence for the focal outcome, thereby affecting its judged likelihood. (PsycINFO Database Record (c) 2010 APA, all rights reserved)