透射型定时探测器

本文介绍了由微道板构成的透射型定时探测器,得到的飞行时间系统的时间分辨为280ps。并对进一步改善时间特性作了讨论。     

屏蔽电泵运行中存在问题的分析与改进

对屏蔽电泵在非设计流量下工作存在较大的轴向力不平衡，造成前端轴承磨损严重进行了分析。在不降低效率的情况下，在屏蔽电泵的泵头加入平衡盘使轴向力得到平衡，并取得了满意的效果。     

基于模糊信息处理的中板轧机微机在线监测系统

中板轧机是中板厂最重要的生产设备，对其工况进行在线监测意义重大，各种传感器将轧机的工况信息传送给微机系统，微机系统将这些信息进行模糊处理，发出相关信息，指导系统安全，高效运行。     

模拟焊后热处理对锅炉用钢板SA-299力学性能的影响

对新日铁供货的SA-299钢板取样进行了供货状态及610～650℃/8h炉冷的模拟焊后热处理,以进行力学性能对比试验。试验结果表明,经过630℃/8h炉冷的模拟焊后热处理后σs降低25～40MPa、σb降低55～65MPa,但力学性能符合ASMESA-299标准和采购规程C1F19-98的要求。     

提高摩托车用干荷电电池综合性能的研究

通过改进铅膏的配方及极板的独特处理工艺 ,提高了干电荷电摩托车电池的低温高率放电性能、充电接受能力和储存性能 ,完全可以满足国内外摩托车主机厂的各种要求。     

Modelling of fatigue damage progression and life of CFRP laminates

A progressive fatigue damage model has been developed for predicting damage accumulation and life of carbon fibre‐reinforced plastics (CFRP) laminates with arbitrary geometry and stacking sequence subjected to constant amplitude cyclic loading. The model comprises the components of stress analysis, fatigue failure analysis and fatigue material property degradation. Stress analysis of the composite laminate was performed by creating a three‐dimensional finite element model in the ANSYS FE code. Fatigue failure analysis was performed by using a set of Hashin‐type failure criteria and the Ye‐delamination criterion. Two types of material property degradations on the basis of element stiffness and strength were applied: a sudden degradation because of sudden failure detected by the fatigue failure criteria and a gradual degradation because of the nature of cyclic loading, which is driven by the increased number of cycles. The gradual degradation of the composite material was modelled by using functions relating the residual stiffness and residual strength of the laminate to the number of cycles. All model components have been programmed in the ANSYS FE code in order to create a user‐friendly macro‐routine. The model has been applied in two different quasi‐isotropic CFRP laminates subjected to tension–compression (T–C) fatigue and the predictions of fatigue life and damage accumulation as a function of the number of cycles were compared with experimental data available in the literature. A very good agreement was obtained.     

酚醛树脂复合板在热连轧机中的应用

重点分析了现有F7机架出口导卫装置的情况。原导卫材料是由铸钢制造 ,由于摩擦和高温常常引起热连轧带钢表面划伤 ,根据现场实际情况用酚醛树脂复合板替代铸钢导卫装置。实践表明 ,这种改造即可行又可靠 ,并取得了好的效果     

Two-stage fatigue loading of woven carbon fibre reinforced laminates

A brief review of the models used to predict the cumulative fatigue damage in FRP composites is presented. Two‐stage fatigue loading of a [0/90,± 45₂,0/90]_s quasi‐ isotropic woven carbon fibre/epoxy resin laminate was evaluated at stress ratio R = 0.05 and the failure mechanisms investigated using x‐radiography after each loading stage. The results are presented in terms of fatigue strength and damage growth and are compared with those in the literature. A low‐to‐high loading sequence is more damaging than a high‐to‐low one and the Palmgren‐Miner linear damage rule may no longer be valid for this kind of material, as previously reported.     

宽流道板式换热器在氧化铝生产种子分解过程中的应用

介绍了宽流道板式换热器的结构、特点及在氧化铝生产种子分解过程中的应用。     

包钢薄板坯连铸厂房钢结构设计及其特点

本文介绍了包钢薄板坯连铸主厂房钢结构的设计及特点。该厂房为单层重型工业厂房，下柱为组合式H型钢双肢柱，屋面大梁为焊接工字钢梁，基本柱距为12m，车间设置295t／67t／22t吊车，屋面和墙面采用彩色压型钢板。同时，在结构选型和构造方面有新的改进和发展。