列车客车用低温发热电缆地面辐射供暖系统的实验研究

对不同地板结构和不同导线间距下发热电缆地面辐射供暖系统的热工性能进行了测试分析，考察了系统的稳定性和可靠性，给出了综合比较结果，分析了影响发热电缆地面辐射供暖系统热工性能的主要因素及其影响规律。     

Structural modelling of coprecipitated VTiO catalysts

A statistical study of the particle shape and size of pure V₂O₅ and TiO₂, and samples of coprecipitated V₂O₅---TiO₂ catalysts with different V/Ti ratios, has been performed. They were also characterized by XRD, EDAX, SEM and XPS. The results showed that pure vanadium pentoxide is compose by large square or needle-shaped particles, while pure titanium dioxide has small and rounded ones. VTiO samples presented an area and shape, depending on the V/Ti ratio.

These results and the spectroscopical characterization conducted to a particle model of the catalysts. Those VOTi samples with high V/Ti ratio would have large V₂O₅ crystals acting as support of a V/TiO₂ solid solution. In contrast, those samples with a low V/Ti ratio, would have the solid solution supporting vanadium pentoxide crystals.     

Modeling the Absorption of Acidic Gases by Alkanolamine Solutions Incorporating Several Reactions

A general model, based on double film theory, is developed to study absorption with chemical reactions. In the liquid film region, the model is a set of differential equations that describe the mass transfer accompanying several chemical reactions; the resolution of the system is achieved by the finite difference method using an implicit scheme combined with Newton's method. Continuity equations and equilibrium coefficients are exploited in the treatment of the bulk region, which is based on the Newton‐Raphson method; the results are used directly as boundary conditions in the liquid film equations. Maxwell‐Stefan equations have been used as a rigorous approach in this model.     

A new approach to the decomposition of Boolean functions by the method of <Emphasis Type="Italic">q</Emphasis>-partitions. III. Joint decomposition of a function system

The paper considers the set-theoretical approach to the joint decomposition of systems of Boolean functions of variables specified in different representation forms. The approach is based on the method of q-partitions of conjuncterms and concept of decomposition clones. Theorems on joint decomposition of a system of full and partial functions are formulated. The approach is illustrated by examples. Parts I and II of this article are published in No. 5 (2001) and No. 1 (2002). __________ Translated from Kibernetika i Sistemnyi Analiz, No. 2, pp. 39–58, March–April 2007.     

Kinetics of oxygen absorption in aqueous sodium dithionite solutions

The absorption and reaction of oxygen in aqueous alkaline solutions of sodium dithionite has been experimentally investigated in a novel gas-liquid contactor. The novel gas-lift bubble column contactor was used to study the kinetics over wide ranges of reactant concentrations, temperature, and pH. The oxygen-sodium dithionite reaction was found to be first-order with respect to dithionite in the range of dithionite concentration < 0.1 M, and second-order in the range of dithionite concentration > 0.1 M. The reaction with respect to oxygen was found to be zero-order for all dithionite concentrations. These results and experimental investigations of the effect of solution alkalinity and temperature on the reaction rate are consistent with previous findings obtained in different gas-liquid contactors. The results thus confirm the feasibility of using the gas-lift bubble column for the kinetics of gas-liquid reactions.     

激光光束质量因子的研究进展

本文详细分析了各种光场下光束质量M2因子。在不同的场中,A.E.Siegman当初所定义的M2因子,已经有了很大的变化,因而M2因子的特性也与当初不同,不仅M2因子可以大于等于1,而且可以小于1,甚至小于0。其反映的物理意义,也从经典场中的衍射极限倍数,变化为非经典场中的准直性量度以及对空间相干性的某些反映。此外还列举并分析了几种特殊的光束质量因子,最后讨论了M2因子应用的问题并指出了其局限性。     

Investigation of fusion reactions in palladium and titanium tritide using galvanostatic,coulometric, and hydrogen permeation techniques

We describe several electrochemical methods used to investigate the possibility of cold fusion phenomena in palladium and titanium tritide cathodes. We performed long-term (up to 77 days) electrolysis experiments with electrochemical cells of the University of Utah type at current densities as high as 1 A/cm², while monitoring neutron and tritium levels. With some cells, we pulsed the current to determine if neutron bursts would result. In another cell, we used titanium tritide as the cathode to determine if D-T reactions yielding neutrons would occur. In no instance were levels of neutrons or tritium significantly above background except in the titanium tritide cell where isotopic exchange, occcurring between the electrode and the electrolyte, resulted in significant tritium levels. We also combined x-ray photoelectron spectroscopy (XPS) and electrochemical hydrogen permeation experiments to determine the effectiveness of various Pd surface treatment procedures on the resultant electrochemical hydrogen absorption efficiency. Electroanalytical and thermal desorption/gas analysis techniques indicated the maximum loading of H in Pd was to a ratio of HPd=0.8.     

磷酸浓缩氟吸收问题的探讨

将我国现有的几种磷酸浓缩流程和实际应用效果进行比较 ,并从氟吸收机理分析探讨氟吸收级数与吸收效率的关系 ;氟硅酸浓度、温度与吸收效率的关系 ;吸收设备和雾沫分离器选型等     

碳铵化肥发青问题解决小结

探讨了该厂化肥生产中碳铵发青的原因,通过硫化氢含量的测定,分析了系统内外影响因素,提出了解决措施,达到了不停车稳定产品质量的目的。     

The prediction of transport parameters in filamentous fermentation broths based on results obtained in pseudoplastic polymer solutions

Transport phenomena studies on single phase “model” fluids are of limited value in biochemical engineering if they cannot be translated to the heterogeneous systems encountered in real fermentation processes. In this paper we discuss the utility of polymer solutions as models of filamentous fermentation broths for evaluation of: pipeline friction factors and impeller power numbers (turbine and helical ribbon). To a first approximation, polymer solutions can serve as suitable models for the prediction of laminar flow pressure drop in pipelines and turbulent power consumption in stirred tanks. However, results obtained on polymer solutions do not directly apply to filamentous fermentation broths for predictions of laminar flow impeller power consumption and the transition point for turbulent flow in stirred tanks. These discrepancies are believed to result from the existence of a time dependent yield stress in filamentous fermentation broths.